Most Fitbits can handle shower water, but not all models are the same

Whether your Fitbit survives a shower depends on which model you own. Fitbit divides its trackers into two water-resistance categories: splash-resistant and water-resistant. Splash-resistant models handle sweat and brief water contact but should not go under water. Water-resistant models are rated to 50 meters, which means they can handle showering, swimming, and brief submersion. Check your specific model's rating before you wear it in the shower.

The difference matters because water damage is not covered under Fitbit's standard warranty. If you shower with a splash-resistant tracker and water gets inside, you will need to replace it out of pocket. Most current Fitbit models fall into the water-resistant category, but older trackers and budget models like the Fitbit Inspire series are splash-resistant only.

Key Takeaways

  • Water-resistant Fitbits (rated to 50 meters) are safe to wear in the shower, but splash-resistant models are not.
  • You can find your model's water rating on the Fitbit website or in your device manual under specifications.
  • Water damage from showering with a splash-resistant tracker is not covered by warranty.
  • Even water-resistant models should be rinsed with fresh water after chlorine or salt water exposure to prevent corrosion.

How to check your Fitbit's water rating

Open the Fitbit app on your phone and go to your device settings. The water-resistance rating appears under "Device Information" or "Specifications." If you do not have the app, visit Fitbit's official website and search for your model number — the specs page will list the rating clearly.

The rating will say either "splash-resistant" or "water-resistant to 50 meters." Some older Fitbits use the term "5 ATM," which is the same as 50 meters and means the device is safe for showering and swimming. If you cannot find the rating or own a very old model, assume it is splash-resistant and keep it out of the shower.

Which current Fitbit models are water-resistant

The Fitbit Sense 2, Versa 4, Charge 6, and Ace LTE are all water-resistant to 50 meters. The Fitbit Inspire 3 and Inspire 2 are splash-resistant only. The Fitbit One, Zip, and Flex 2 are also splash-resistant. If you own a Fitbit from the Versa or Charge line released in 2020 or later, it is almost certainly water-resistant.

Fitbit updates its product line regularly, so if you bought your tracker within the last two years, check the specs page rather than relying on the model name alone. A newer Inspire model may have different water resistance than an older one with the same name.

What happens if water gets inside a splash-resistant Fitbit

Water inside the device can corrode the battery and circuit board, causing the tracker to malfunction or stop working entirely. You may notice the screen fogging up, buttons becoming unresponsive, or the device failing to charge. These are signs that water has entered the sealed casing.

If this happens, do not try to charge the device. Instead, place it in a container of uncooked rice or silica gel packets for 24 to 48 hours to absorb the moisture. This sometimes works if the water has not yet caused corrosion, but there is no may provide. If the device still does not work after drying, you will need to buy a replacement.

Care tips for water-resistant Fitbits in the shower

Rinse your Fitbit with fresh water after showering, especially if you use hot water or live in a hard-water area. Mineral deposits from tap water can build up on the device over time and affect the sensors. Dry it with a soft cloth afterward to prevent water spots.

Avoid wearing your Fitbit in a hot tub or sauna. The combination of heat and water can damage the seals and battery. Do not submerge it deeper than 50 meters or wear it while diving — the pressure at greater depths exceeds the device's rating. If you shower with your Fitbit regularly, inspect the band and casing every few months for cracks or loose seams that could let water in.

Swimming and chlorine considerations

Water-resistant Fitbits can handle chlorinated pools and salt water, but rinse the device with fresh water when ready after. Chlorine and salt accelerate corrosion of the metal contacts and seals. If you swim regularly with your Fitbit, rinsing becomes especially important to extend the device's lifespan.

Some users report that chlorine exposure over months or years causes the band to discolor or the casing to develop white spots. These are cosmetic issues and do not affect function, but rinsing reduces the risk. If you plan to wear your Fitbit in a pool several times a week, budget for band replacement every 12 to 18 months.

Frequently Asked Questions

Can I wear my Fitbit while taking a bath?

If your Fitbit is water-resistant to 50 meters, yes — a bath is shallower and less intense than a shower. However, the same care applies: rinse with fresh water afterward and dry it. Avoid prolonged soaking or submerging it deeper than necessary.

What does "splash-resistant" actually mean?

Splash-resistant means the device can handle sweat, rain, and brief water contact like washing your hands. It is not designed to survive being submerged or exposed to running water from a shower. Think of it as "resistant to accidental water," not intentional water exposure.

Will my Fitbit warranty cover water damage?

No. Fitbit's standard warranty does not cover water damage from any source, including showering with a splash-resistant model. Accidental damage protection plans are available for some models but must be purchased at the time of purchase.

Can I wear my water-resistant Fitbit in the ocean?

Yes, but rinse it with fresh water when ready after. Salt water corrodes metal contacts faster than chlorinated water. If you plan to wear your Fitbit at the beach regularly, expect to replace the band more often due to salt exposure.

How do I know if water got inside my Fitbit?

Look for condensation or fogging under the screen, unresponsive buttons, or charging problems. If you see any of these signs, stop using the device and try the rice-drying method. Do not charge it until you are sure the moisture is gone.