A factory reset clears all data and returns your tracker to its original state

A factory reset on your Fitbit Charge HR erases all stored data—steps, heart rate logs, sleep records, and personal settings—and returns the device to how it was when it left the factory. This is different from straightforward restarting it. You would reset your Charge HR if it is frozen, not syncing with your phone, or if you are selling or giving it away and want to remove your personal information.

The reset process takes about a minute and requires only the tracker itself. You do not need your phone or computer, though you will want to have your Fitbit account password nearby if you plan to set it up again afterward.

Key Takeaways

  • A factory reset erases all data from your Charge HR and returns it to factory settings, which is different from a straightforward restart.
  • You perform a reset by holding the button on the back of the tracker for 10 to 12 seconds until the Fitbit logo appears and disappears.
  • After a reset, your tracker will show the Fitbit logo and a progress bar, then display the time—this means the reset worked.
  • If your Charge HR is frozen or not responding, try a restart first by holding the button for 3 to 5 seconds before attempting a full reset.
  • Once reset, you will need to set up the tracker again in the Fitbit app using your account login.

How to perform a factory reset

Locate the small button on the back of your Charge HR, near the bottom. This is the only physical button on the device. Press and hold this button for 10 to 12 seconds without releasing. You will see the Fitbit logo appear on the screen.

Continue holding the button until the logo disappears and you see a progress bar. Once the progress bar finishes, the screen will go blank briefly, then display the current time. When you see the time, the reset is complete and you can release the button. The entire process usually takes less than a minute.

Do not interrupt the reset by pressing the button again or removing the tracker from your wrist. If the screen goes dark and stays dark, or if you see an error message, the reset may not have worked—wait 30 seconds and try again.

What happens after the reset

Your Charge HR will display the time and date, but it will not be connected to your Fitbit account. The tracker will still count steps and track your heart rate, but that data will not sync anywhere until you set it up again.

To reconnect your tracker, open the Fitbit app on your phone and sign in with your account. The app will search for your Charge HR and prompt you to complete the setup process. This usually takes a few minutes. Once paired, your tracker will resume syncing data to your account.

When to try a restart instead of a reset

If your Charge HR is frozen, unresponsive, or showing a blank screen, a restart may fix the problem without erasing your data. A restart is simpler: hold the button on the back for 3 to 5 seconds until the Fitbit logo appears, then release. The tracker will turn off and back on.

Try a restart first if your tracker is just acting sluggish or slow to respond. If a restart does not solve the problem after two or three attempts, then proceed with a factory reset. A restart takes only a few seconds and preserves all your stored data, so it is worth trying before you erase everything.

Troubleshooting if the reset does not work

If you hold the button for 10 to 12 seconds and nothing happens, make sure you are pressing the correct button. The Charge HR has only one button, located on the back of the band near the bottom edge. Press firmly and hold steady—a light touch may not trigger the reset.

If the screen shows an error message or freezes during the reset, wait at least one minute before trying again. Charge your Charge HR for at least 30 minutes if the battery is very low, as a reset may not work on a nearly dead battery. If the reset still fails after multiple attempts, the tracker may have a hardware problem and may need to be replaced.

Preparing to reset if you are selling or giving away your tracker

Before you reset your Charge HR, remove it from your Fitbit account through the app. Open the Fitbit app, go to your profile, find your Charge HR in your devices list, and select the option to remove or unpair the device. This step disconnects the tracker from your account before the reset.

After you remove it from your account and perform the factory reset, all your personal data will be gone from both the tracker and your Fitbit account. The new owner can then set up the tracker with their own account. This protects your privacy and ensures a clean handoff.

Frequently Asked Questions

Will a reset delete my data from the Fitbit app?

No. A reset only erases data stored on the tracker itself. Your historical data in the Fitbit app remains there. However, any data that has not yet synced to the app will be lost when you reset the device.

How long does it take to reset a Charge HR?

The reset process itself takes less than a minute. You hold the button for 10 to 12 seconds, and the progress bar completes within another 10 to 20 seconds. Setting up the tracker again in the app afterward takes a few more minutes.

Can I reset my Charge HR without the Fitbit app?

Yes. The factory reset is performed entirely on the device using the physical button. You do not need your phone or the app. However, you will need the app to set up the tracker again after the reset.

What if my Charge HR is stuck on the Fitbit logo screen?

If the logo appears but does not disappear, try holding the button for a few more seconds. If it remains stuck, release the button, wait 30 seconds, and try the reset again. If it stays frozen on the logo, the device may need a replacement.

Do I need to charge my Charge HR before resetting it?

It is a good idea to charge it to at least 50 percent battery before resetting, though a reset can work on lower battery. If the battery is critically low, charge for 30 minutes first to may support the reset completes without interruption.