A factory reset clears all data and returns your Charge HR to its original state

A factory reset on your Fitbit Charge HR erases all your stored data — steps, heart rate logs, sleep records, and personal settings — and returns the device to how it was when you first took it out of the box. You might need to reset if the device is frozen, not syncing with your phone, or if you are selling or giving it away. The reset process takes about a minute and requires only the device itself.

There are two ways to reset a Charge HR: a soft reset (which often fixes minor problems without erasing data) and a factory reset (which wipes everything). Most people should try the soft reset first, since it solves many common issues and keeps your data intact.

Key Takeaways

  • A soft reset restarts the device without erasing data and fixes freezing, syncing problems, and unresponsive screens in most cases.
  • A factory reset erases all your data and returns the device to its original state, which you need only if a soft reset does not work or before giving the device to someone else.
  • Both resets require only the device itself — no computer, app, or account access needed.
  • After a factory reset, you will need to re-pair the device with the Fitbit app and set up your profile again.

How to do a soft reset without losing your data

A soft reset is the gentler option and should be your first step. It restarts the device's operating system without touching any of your stored information. This fixes most problems: a frozen screen, buttons that do not respond, or the device not syncing with your phone.

To soft reset your Charge HR, hold down the button on the left side of the device for 10 to 15 seconds. You will see the Fitbit logo appear on the screen, then the device will vibrate. Release the button. The device will restart and return to the clock face within a few seconds. Your data remains on the device and will sync normally once the restart is complete.

After the soft reset, open the Fitbit app on your phone and check whether the device syncs. If it does, the problem is solved. If the device still does not respond or sync, move on to a factory reset.

How to do a factory reset and erase everything

A factory reset wipes the device completely and returns it to the state it was in before you first set it up. Use this if a soft reset did not work, or if you are giving the device to someone else and want to remove all your personal information.

To factory reset your Charge HR, hold down the button on the left side for 10 to 15 seconds until you see the Fitbit logo. This time, continue holding the button for another 10 to 15 seconds after the logo appears. You will see a second vibration and the screen will go blank or show a reset animation. Release the button and wait 30 seconds for the device to finish restarting.

When the device powers back on, it will show the setup screen — the same screen you saw when you first turned it on. All your data is now gone. The device is ready to be set up by you again or by a new owner.

What to do after a factory reset

After a factory reset, your Charge HR is blank and will not sync with your phone until you set it up again. Open the Fitbit app on your phone and tap the plus icon or "Set Up Device" button. Select Charge HR from the list of devices.

Follow the on-screen steps to pair the device with your phone. You will need to enter your Fitbit account information (the email and password you use for Fitbit). Once pairing is complete, the app will walk you through setting your personal information: age, weight, height, and gender. These details help the device calculate calories burned and other metrics.

Your historical data (steps, heart rate, sleep) from before the reset cannot be recovered — it was erased when you factory reset. However, any data synced to your Fitbit account before the reset is still stored in your account and visible in the app's history.

When to soft reset versus factory reset

Use a soft reset if the device is frozen, buttons are not responding, or it is not syncing with your phone. A soft reset solves these problems about 80 percent of the time and takes 30 seconds. Your data stays on the device.

Use a factory reset only if a soft reset did not work, or if you are giving the device away and want to remove all your personal information. A factory reset is permanent — you cannot undo it or recover the data afterward.

If you are selling or giving away your Charge HR, factory reset it before handing it over. This removes your heart rate data, location history, and personal settings so the new owner starts with a clean device.

Troubleshooting if your device will not reset

If the device does not respond when you hold the button, the battery may be completely drained. Plug the Charge HR into its charging cable and let it charge for at least 30 minutes, then try the soft reset again.

If the device still does not respond after charging, try a factory reset. Hold the button longer — some devices need 20 to 25 seconds of continuous pressure before the logo appears. Make sure you are pressing the button on the left side of the device, not the right side.

If the device still will not reset after charging and a longer button hold, the device may have a hardware problem. Contact Fitbit support through the app or the Fitbit website for further help.

Frequently Asked Questions

Will I lose my data if I do a soft reset?

No. A soft reset only restarts the device and does not erase any data. All your steps, heart rate logs, and sleep records stay on the device and will sync to the app once the restart is complete.

Can I recover my data after a factory reset?

Data stored on the device itself cannot be recovered after a factory reset. However, any data that synced to your Fitbit account before the reset is still in your account. Log in to your Fitbit account in the app to see your historical data.

Do I need my Fitbit password to reset the device?

No. A soft reset and factory reset both work without a password — they use only the physical button on the device. You will need your password later if you want to set up the device again and sync it to your account.

How long does a factory reset take?

The reset itself takes about 30 seconds. The device will restart and show the setup screen within a minute. Setting up the device again in the Fitbit app takes another 5 to 10 minutes.

What if my Charge HR is stuck on the Fitbit logo screen?

Try a soft reset by holding the button for 10 to 15 seconds again. If it stays on the logo, try charging the device for 30 minutes and then attempt the reset once more. If the logo screen persists, contact Fitbit support.