A factory reset clears all data and returns your Charge HR to its original state

A factory reset on your Fitbit Charge HR erases all your stored data — steps, heart rate logs, sleep records, and personal settings — and returns the device to how it was when you first opened the box. You would do this if the tracker is freezing, not syncing with your phone, or if you are selling or giving it away. The reset takes about 30 seconds and requires only the device itself; you do not need a computer or the Fitbit app.

There are two types of reset: a soft reset (which restarts the device without erasing data) and a factory reset (which erases everything). Most problems are solved by a soft reset first. If that does not work, move to a factory reset.

Key Takeaways

  • A soft reset restarts your Charge HR without erasing any data and fixes most freezing or syncing problems.
  • A factory reset erases all your activity history, heart rate data, and personal settings and returns the device to its original state.
  • Both resets are done on the device itself using button combinations — no app or computer required.
  • After a factory reset, you will need to set up the device again in the Fitbit app and reconnect it to your phone.

How to do a soft reset (restart without losing data)

A soft reset is the first thing to try if your Charge HR is not responding, is frozen, or is not syncing. It restarts the device but keeps all your data intact.

Hold down the button on the left side of the Charge HR for about 10 to 15 seconds. You will see the Fitbit logo appear on the screen, then the device will vibrate. Release the button. The tracker will restart and you will be back at the clock face within a few seconds. Your data is still there.

After the soft reset, try syncing your Charge HR to your phone again by opening the Fitbit app and tapping the sync button. If the problem persists, move on to a factory reset.

How to do a factory reset (erase all data)

A factory reset removes everything from your Charge HR and prepares it for a fresh setup. Do this only if you are sure you want to erase your data, or if you are giving the device to someone else.

Press and hold the button on the left side of the device for about 10 to 15 seconds, just as you would for a soft reset. When the Fitbit logo appears and the device vibrates, keep holding the button for an additional 5 to 10 seconds. You will see a second vibration and the screen will go blank or show a reset confirmation message. Release the button. The device will restart and show the setup screen.

The entire process takes less than a minute. Once the reset is complete, your Charge HR will display the initial setup screen, asking you to select your language and begin pairing with the Fitbit app.

Setting up your Charge HR after a factory reset

After a factory reset, your Charge HR is blank and needs to be set up again. Open the Fitbit app on your phone and tap the plus icon (or "Set Up Device" if you see that option). Select "Charge HR" from the list of devices.

Follow the on-screen prompts to pair the device with your phone via Bluetooth. The app will ask you to enter your personal information — height, weight, age, and gender — which the tracker uses to calculate calories burned and other metrics. You can also set your daily goals for steps, distance, and active minutes at this time.

Once pairing is complete, your Charge HR will sync with the app and begin tracking your activity. Your old data is gone, but the device is now ready to start fresh.

When to soft reset versus factory reset

Use a soft reset when your Charge HR is frozen, not responding to button presses, or not syncing — basically any time something seems stuck but you want to keep your data. A soft reset is harmless and should always be your first step.

Use a factory reset only when a soft reset does not fix the problem, or when you are preparing the device for someone else to use. Factory resets are permanent and cannot be undone, so make sure you have backed up any data you want to keep (the Fitbit app stores your history in the cloud, so your data may still be visible in your account even after the device is reset).

Troubleshooting if the reset does not work

If your Charge HR does not respond to the button hold, or if the reset does not fix the problem, the device may have a hardware issue. Try charging the tracker fully — a completely drained battery can sometimes prevent resets from working. Leave it on the charger for at least two hours, then attempt the reset again.

If the device still does not respond after a full charge, or if it restarts but the problem persists, the hardware may be damaged. Contact Fitbit support through their website or the Fitbit app for further help. Fitbit offers a limited warranty that may cover repairs or replacement depending on when you purchased the device.

Frequently Asked Questions

Will a soft reset erase my step count and activity history?

No. A soft reset only restarts the device and keeps all your data intact. Your steps, heart rate logs, and all other activity remain on the tracker and in the Fitbit app.

Can I undo a factory reset?

No, a factory reset cannot be undone. However, if your Fitbit account is synced to the cloud, your historical data (steps, workouts, weight logs) may still be visible in your Fitbit app account, even though it is no longer on the device itself.

How long does a factory reset take?

The reset itself takes about 30 seconds. After that, you will need to set up the device again in the Fitbit app, which usually takes 5 to 10 minutes depending on how much information you enter.

Do I need to charge my Charge HR before resetting it?

It is a good idea to have at least some battery left, but the device does not need to be fully charged. If the battery is completely dead, charge it for at least 30 minutes before attempting a reset.

What if my Charge HR is stuck on the setup screen after a factory reset?

Force close the Fitbit app on your phone, then reopen it and try pairing again. If the device still will not pair, try a soft reset and then attempt the pairing process once more.