A factory reset clears all data and returns your Charge HR to its original state
A factory reset on your Fitbit Charge HR erases all stored data—workouts, heart rate logs, personal settings—and returns the device to the condition it left the factory. This is useful when you are selling or giving away the device, troubleshooting persistent glitches, or preparing it for a new user. The reset itself takes less than a minute, but you should back up any data you want to keep first, since the process cannot be undone.
The Charge HR does not have a reset button or menu option on the device itself. Instead, you reset it through the Fitbit app on your phone or computer, or by connecting it to a computer via USB cable. The method you choose depends on whether your device is still syncing with the app or whether it has stopped responding.
Key Takeaways
- A factory reset erases all data from your Charge HR and cannot be reversed, so sync your device to the Fitbit app first to save your information.
- The easiest reset method is through the Fitbit app on your phone: open the device settings, scroll to the bottom, and tap "Clear User Data."
- If your device will not sync with the app, you can reset it by plugging the USB cable into a computer and holding the button on the back of the tracker for 10 to 15 seconds.
- After a reset, your Charge HR will show a blank screen or the Fitbit logo; reconnect it to the app to set it up again as a new device.
Reset through the Fitbit app on your phone
If your Charge HR is still syncing with the Fitbit app, this is the fastest way to reset it. Open the Fitbit app on your phone and tap the profile icon in the bottom right corner. Find your Charge HR in the list of devices and tap it to open the device settings.
Scroll down to the bottom of the settings screen. You will see an option labeled "Clear User Data" or "Delete" (the exact wording varies depending on your phone's operating system and the app version). Tap it. The app will ask you to confirm—tap "Yes" or "Confirm." The reset will complete within seconds, and your Charge HR will vibrate or show a blank screen.
After the reset, your device will no longer be connected to your account. When you pick up the Charge HR, it may show the Fitbit logo or a blank screen. Reconnect it to the app by opening the app, tapping the plus icon to add a new device, and following the pairing steps as if you were setting it up for the first time.
Reset using the USB cable and computer
Use this method if your Charge HR will not sync with the app or if you do not have the Fitbit app installed. You will need the USB cable that came with your device and a computer (Windows or Mac). Plug the USB cable into a USB port on your computer, then insert the other end into the charging port on the back of the Charge HR.
Once the device is connected, locate the small button on the back of the tracker near the charging port. Press and hold this button for 10 to 15 seconds without releasing. You may see the Fitbit logo appear on the screen, or the screen may go blank. Keep holding the button until the screen goes dark or the logo disappears. Release the button. The reset is complete.
Disconnect the USB cable from your computer and the device. Your Charge HR is now reset to factory settings. If you want to use it again, plug it back in to charge, then open the Fitbit app on your phone and add it as a new device.
Back up your data before resetting
Once you reset your Charge HR, all data stored on the device is gone permanently. However, any information that has already synced to your Fitbit account (steps, heart rate, workouts, sleep logs) remains in your account and will not be deleted by a device reset.
To make sure you have a record of everything, sync your device to the app one final time before you reset. Open the Fitbit app, swipe down on the home screen to trigger a manual sync, and wait for the sync to complete. Once the app shows "Synced just now," you can safely reset the device knowing that your historical data is saved in your Fitbit account.
What to do if the reset does not work
If you have held the button for 15 seconds and the screen is still showing data or responding to taps, try the reset again. Make sure the USB cable is fully inserted into both the computer and the device, and that the button you are pressing is the one on the back near the charging port (not the side button used for navigation).
If the device still does not reset after two attempts, try a different USB port on your computer or a different computer altogether. Sometimes a loose connection prevents the reset from registering. If you are using a Mac, try a different USB cable if you have one available, as some third-party cables do not carry the full power signal needed for a reset.
If the device remains unresponsive after these steps, the hardware may have a fault. Contact Fitbit support through the Fitbit app (tap the profile icon, then "Help") or visit the Fitbit website to explore warranty options or troubleshooting specific to your situation.
Setting up your Charge HR after a reset
After a successful reset, your Charge HR will be blank and ready for setup. Charge the device fully before you begin—plug the USB cable into a computer or wall adapter and wait until the battery icon shows full. This usually takes one to two hours.
Open the Fitbit app on your phone and tap the plus icon (usually in the top right or bottom of the screen). Select "Set Up a Device" and choose Charge HR from the list. Follow the on-screen prompts to pair the device with your phone via Bluetooth. The app will ask you to enter your personal information (age, height, weight, gender) again, as these settings were erased during the reset. Once pairing is complete, your Charge HR will begin syncing data to your account.
Frequently Asked Questions
Will a factory reset delete my Fitbit account?
No. A factory reset only erases data on the device itself. Your Fitbit account and all the historical data stored in it remain unchanged. You can reconnect the reset device to your account, and your old data will still be there.
Can I undo a factory reset?
No. A factory reset cannot be reversed. Once you clear the data, it is gone from the device permanently. This is why syncing to the app before you reset is important—your account keeps a copy of everything that has synced.
How long does a factory reset take?
The reset itself takes less than a minute. If you are using the USB cable method, hold the button for 10 to 15 seconds. If you are using the app, the process completes within seconds of you tapping "Confirm."
Do I need to charge my Charge HR before resetting it?
It is a good idea to charge it first, but not strictly necessary. The reset uses very little power. However, if the battery is critically low, the device may shut down before the reset completes, so a partial charge is safer than an empty battery.
What if I reset my device but still want to use it?
After the reset, open the Fitbit app, tap the plus icon, and add the device as if it were new. You will pair it to your phone again and enter your personal information. Once pairing is complete, it will sync to your account and begin tracking again.