The Two Ways to Restart Your Fitbit Versa 4

A restart clears temporary glitches without erasing your data or settings. Your Fitbit Versa 4 has two restart options: a soft restart (which takes 30 seconds) and a factory reset (which wipes everything). Most of the time, a soft restart solves freezing, unresponsive screens, or connection problems. Do a soft restart first.

A soft restart is safe to try anytime. It closes all running processes and reloads the operating system, but leaves your account, workouts, and personal settings untouched. A factory reset should only happen if the soft restart does not work or if you are preparing to sell or give away the watch.

Key Takeaways

  • A soft restart takes about 30 seconds and fixes most freezing or connection issues without losing any of your data.
  • Hold the back button and the bottom button together for 10 to 15 seconds until you see the Fitbit logo, then release both buttons.
  • The watch will show a loading screen for about 20 seconds before returning to the clock face — this is normal.
  • If the soft restart does not work, you can perform a factory reset from the Settings menu, but this erases all personal data stored on the watch.
  • After a restart, your watch will reconnect to your phone automatically if Bluetooth is on and the Fitbit app is running.

How to Do a Soft Restart

Locate the two buttons on the left side of your Versa 4. The back button is the smaller one closer to your wrist. The bottom button is the larger one below it. You will press both at the same time.

Press and hold both buttons together for 10 to 15 seconds. Do not let go early. You will see the Fitbit logo appear on the screen — this is your signal that the restart has begun. Keep holding until the logo appears, then release both buttons when ready.

The watch will display a loading screen with a spinning circle. This takes about 20 seconds. Do not press any buttons or try to interact with the watch during this time. When the loading finishes, you will see the clock face. Your watch is now restarted and ready to use.

Check whether your problem is solved. If the screen was frozen, it should respond to taps now. If the watch was not connecting to your phone, open the Fitbit app on your phone and wait 30 seconds for the connection to restore. If neither of these issues is fixed, move to the factory reset section below.

How to Do a Factory Reset

A factory reset erases everything stored on the watch itself: your personal settings, saved workouts, alarms, and any watch faces you downloaded. Your account data (all your historical workouts, steps, and heart rate) stays safe in the Fitbit app and on Fitbit's servers, so you will not lose your long-term records. However, you will need to set up the watch again from scratch.

On your Versa 4, swipe down from the top of the screen to open the quick settings menu. Tap the gear icon to open Settings. Scroll down and tap About. Scroll down again and tap Factory Reset. The watch will ask you to confirm — tap Yes.

The watch will show a loading screen and then return to the initial setup screen, the same one you saw when you first turned it on. This takes about one minute. Do not turn off the watch or press buttons during this time.

Once the setup screen appears, you can set up the watch again. Open the Fitbit app on your phone, tap your profile picture in the top left, and select your Versa 4 from the list of devices. Follow the on-screen steps to reconnect it to your account. Your historical data will reappear once the connection is complete.

What to Do If Your Watch Will Not Restart

If the watch is completely unresponsive and will not turn on, the battery may be dead. Plug the watch into its charging cable and leave it plugged in for at least 30 minutes. The Fitbit logo should appear on the screen once the battery has enough charge. If nothing appears after 30 minutes, try a different USB power source or a different charging cable if you have one available.

If the watch turns on but the buttons do not respond, try the soft restart again but hold the buttons for the full 15 seconds. Sometimes a very frozen watch needs the longer hold time. If the buttons still do not respond after two attempts, the watch may have a hardware problem and you should contact Fitbit support through the Fitbit app or website.

When to Restart Instead of Other Fixes

A restart is the right first step for freezing, slow performance, or a screen that does not respond to taps. It is also the fix to try if the watch will not connect to your phone, even after you have checked that Bluetooth is on and the Fitbit app is open.

A restart will not fix a cracked screen, water damage, or a battery that no longer holds a charge. It will not fix problems with the Fitbit app itself on your phone — if the app is crashing or not syncing, restart your phone instead. If your watch is losing connection to your phone every few minutes even after a restart, the problem is usually a Bluetooth range issue (move closer to your phone) or a problem with your phone's Bluetooth, not the watch.

After Your Restart Is Complete

Your watch should reconnect to your phone automatically within 30 seconds if Bluetooth is turned on and the Fitbit app is running in the background. Open the Fitbit app and check that your watch name appears under "Devices" with a green dot next to it, which means it is connected.

If the watch does not reconnect, open the Fitbit app, tap your profile picture, tap your Versa 4, and tap the gear icon to open device settings. Scroll down and tap Reconnect Device. Follow the on-screen steps. This usually takes one to two minutes.

Frequently Asked Questions

Will a restart erase my workouts and step count?

No. A soft restart keeps all your personal data on the watch. A factory reset erases data stored on the watch, but your complete workout history and step count stay in the Fitbit app and on Fitbit's servers. Once you reconnect the watch to your account after a factory reset, all your historical data reappears.

How long does a soft restart take?

About 30 seconds total. Hold the buttons for 10 to 15 seconds until you see the Fitbit logo, then wait another 20 seconds for the loading screen to finish. You will see the clock face when it is done.

Can I restart my watch while it is charging?

Yes, you can perform a soft restart while the watch is on the charger. For a factory reset, it is better to have the battery at least half full, but it is not required. Just make sure the watch stays powered on during the reset process.

What if my watch keeps freezing even after a restart?

Try a factory reset. If the watch still freezes after a factory reset, the problem is likely a hardware issue. Contact Fitbit support through the Fitbit app by tapping your profile picture, selecting your device, tapping the gear icon, and scrolling to "Contact Support" at the bottom.

Do I need to restart my phone too?

Usually not. Restart your phone only if the Fitbit app itself is crashing or not opening. If the watch and phone are not connecting, restart the watch first. If they still will not connect after the watch restart, then restart your phone.