Press and hold the button on your Fitbit to power it on
Most Fitbit models turn on by pressing and holding the single button on the device for three to five seconds. You'll see the Fitbit logo appear on the screen, followed by a series of startup animations. The device will vibrate once or twice to confirm it's powering up. If nothing happens after holding the button for five seconds, your Fitbit may need to charge first — connect it to its charging cable and wait 15 to 30 minutes before trying again.
The button location varies slightly by model. On Fitbit Charge and Inspire models, it's on the side of the band. On Fitbit Sense and Versa models, it's typically on the left side of the watch face. Check your device's physical layout if you're unsure where to press.
Charge your Fitbit before the first startup
A brand-new Fitbit usually arrives with some battery charge, but not always enough to complete setup. Connect your device to its charging cable — the cable is specific to your model and comes in the box. The charging contacts on the back of the device should align with the metal pins on the cable. You'll see a lightning bolt icon on the screen when charging begins.
Leave it plugged in for at least 30 minutes before attempting to turn it on. Most Fitbits reach enough charge to power on within 15 minutes, but a full charge takes one to two hours. Once the battery icon shows a full or near-full battery, you're ready to press the button and start up.
Key Takeaways
- Press and hold the button on your Fitbit for three to five seconds until you see the logo and feel a vibration.
- If the device doesn't respond, charge it for at least 15 to 30 minutes using the cable that came in the box.
- The button location depends on your model — check the side of the band or the left edge of the watch face.
- After startup, you'll need to open the Fitbit app on your phone and follow the pairing steps to connect your device.
What happens after the device powers on
Once your Fitbit starts up, you'll see the Fitbit logo, then a series of welcome screens. The device may ask you to set the time, language, or other basic settings. Some models show a pairing code on the screen — write this down or remember it, because you'll need it in the next step.
Your Fitbit is now on, but it's not yet connected to your phone. The device will continue to run and track basic activity even without a phone connection, but you won't see your data or receive notifications until you pair it with the Fitbit app.
Pair your Fitbit with the Fitbit app on your phone
read the Fitbit app from the Apple App Store (for iPhone) or Google Play Store (for Android). Open the app and tap the plus icon or "Set up a device" button. The app will search for your Fitbit by Bluetooth. When it finds your device, select it from the list and enter the pairing code that appeared on your Fitbit screen during startup.
The pairing process usually takes two to three minutes. Once complete, your Fitbit will sync with your phone, and you'll start seeing your activity data in the app. Your device is now fully set up and ready to wear.
Troubleshooting if your Fitbit won't turn on
If you've held the button for five seconds and nothing appears on the screen, the battery is likely too low. Plug the device into its charging cable and leave it for at least 30 minutes. Some Fitbits take longer to respond when the battery is critically low — wait a full hour if you have time.
If the device still doesn't respond after an hour of charging, try a force restart. On most models, this means holding the button for 10 to 15 seconds instead of the usual three to five. You may see a screen flash or feel multiple vibrations. If this doesn't work, the device may have a hardware issue and may need to be replaced — contact Fitbit support with your purchase information.
Keeping your Fitbit charged and ready
Most Fitbit models hold a charge for five to seven days with normal use. To keep your device running smoothly, charge it once a week or whenever the battery icon shows low. Don't wait until the device powers off on its own — charging before it dies completely extends the battery's lifespan.
Store your Fitbit in a cool, dry place when you're not wearing it. Extreme heat or cold can affect battery performance. If you plan to store it for more than a few weeks, charge it to about 50 percent and unplug it from the cable.
Frequently Asked Questions
How long does it take for a Fitbit to charge from completely dead?
A completely drained Fitbit usually takes one to two hours to reach a full charge. It will have enough power to turn on after 15 to 30 minutes, but you should let it charge longer before wearing it to may support the battery lasts through your day.
Do I need to charge my Fitbit before turning it on for the first time?
New Fitbits usually come with some charge, but it's safer to plug it in for 30 minutes before your first startup. This ensures the battery is strong enough to complete the pairing process without shutting down mid-setup.
What if my Fitbit turns on but the screen is blank?
A blank screen usually means the battery is very low. Charge the device for at least an hour. If the screen remains blank after charging, try a force restart by holding the button for 10 to 15 seconds. Contact Fitbit support if the screen stays blank after both steps.
Can I turn on my Fitbit without the app?
Yes, your Fitbit will power on and track basic activity without the app. However, you won't see your data, set goals, or receive phone notifications until you read the Fitbit app and pair your device through it.
Why does my Fitbit vibrate when I press the button?
The vibration is a confirmation that the device received your command and is powering on or responding to your input. It's normal and means your Fitbit's haptic feedback system is working correctly.