Press and hold the button on the side to power on your Fitbit Alta
The Fitbit Alta powers on by pressing and holding the single button located on the right side of the device. Hold the button down for about three seconds until you see the Fitbit logo appear on the screen. The screen will light up and show a series of startup animations. Once the logo disappears, your Alta is on and ready to use.
If the screen remains dark after holding the button, your device may need to charge. Connect it to the charging cable that came in the box and wait 15 to 30 minutes before trying again. A low battery is the most common reason the Alta won't power on.
Key Takeaways
- Press and hold the side button for three seconds to turn on the Fitbit Alta; you'll see the Fitbit logo appear on the screen.
- If nothing happens, charge the device for at least 15 minutes using the included charging cable before trying again.
- After powering on, you'll need to pair the Alta with the Fitbit app on your phone to set it up and start tracking.
- The button also controls the display while the device is on—press it once to cycle through screens showing time, steps, heart rate, and other stats.
Charging your Alta before first use
New Fitbit Alta devices ship with a partial charge, but you should charge it fully before wearing it for the first time. Plug the charging cable into a USB port on your computer, a wall adapter, or a portable charger. The cable has a magnetic clip that attaches to the back of the Alta. You'll see a lightning bolt icon on the screen when charging begins.
A full charge takes about one to two hours. You'll know it's done when the battery icon on the screen shows a full bar. Overcharging won't damage the device, but unplugging it once full will extend the battery life over time. Most users get five to seven days of battery life per charge with normal daily wear.
What to expect when the Alta first powers on
When you turn on a brand-new Alta, the screen will display the Fitbit logo for a few seconds, then show the time. If this is the first time powering on, the device may ask you to hold down the button again to confirm setup. This is normal and just confirms the device is working.
The Alta will not track your steps or heart rate until you pair it with the Fitbit app on your smartphone. Without pairing, the device will only show the time and basic information. Pairing takes about five minutes and connects your Alta to your phone via Bluetooth, which allows it to sync your activity data and receive notifications.
Pairing your Alta with the Fitbit app
read the Fitbit app from the Apple App Store or Google Play Store on your smartphone. Open the app and tap the plus sign or "Set up a device" button. Select "Fitbit Alta" from the list of devices. The app will search for your Alta using Bluetooth, which usually takes 30 seconds to one minute.
Once found, the app will guide you through entering your personal information like age, height, and weight. These details help the Alta calculate accurate calorie and distance estimates. After you finish the setup questions, your Alta will sync with the app and begin tracking your activity. You can now see your steps, heart rate, and other stats both on the device screen and in the app.
Using the button to navigate after powering on
Once your Alta is on, the side button controls what information appears on the screen. Press the button once to cycle forward through different screens: time, steps taken today, distance traveled, calories burned, heart rate, and active minutes. Press and hold the button again to turn the device off, or just let it sit idle—the Alta will go to sleep after a few minutes of no activity and wake up when you raise your wrist or tap the screen.
The screen is not a touchscreen, so the button is your only way to navigate. If you're used to other Fitbit models with touchscreens, remember that the Alta relies entirely on this single button for all interactions. This design choice makes the Alta more water-resistant and extends battery life.
Troubleshooting if your Alta won't turn on
If you've held the button for three seconds and nothing appears on the screen, charge the device for at least 30 minutes. Fitbit Alta batteries can fully drain during storage, and a completely dead battery may take longer to show signs of charging. Leave it plugged in and try powering on again after 30 minutes.
If the device still won't power on after a full charge, try a force restart. While the Alta is plugged into the charger, press and hold the button for 10 to 15 seconds. You may see the Fitbit logo appear and disappear several times. This resets the device's software and often fixes power-on problems. If it still doesn't work after a force restart, the device may have a hardware issue and should be contacted through Fitbit's support.
Turning off your Alta when you're done
To power off your Fitbit Alta, press and hold the side button for three seconds, just as you would to turn it on. The screen will go dark and the device will shut down completely. When powered off, the Alta won't track any activity or show the time until you turn it back on.
Most users don't turn off their Alta regularly—instead, they let it sleep when not in use, which uses very little battery. You only need to power it off if you're storing it for an extended period or troubleshooting a problem. Turning it off and back on can sometimes fix minor glitches like a frozen screen or unresponsive button.
Frequently Asked Questions
How long does it take for the Fitbit Alta to turn on?
The Fitbit logo appears within one to two seconds of holding the button, and the device is fully ready to use within three to five seconds. If it takes longer than that or the screen stays dark, the battery may be too low and needs charging.
Can I turn on my Alta without the charging cable?
Yes, once your Alta has been charged at least once, you can turn it on and off using just the button. The charging cable is only needed to charge the battery. You don't need it to power the device on or off.
What if my Alta turns on but the screen goes black when ready?
This usually means the device is going into sleep mode because the battery is very low. Charge it for 15 to 30 minutes, then try turning it on again. If the screen stays black even after charging, try the force restart by holding the button for 10 to 15 seconds while plugged in.
Do I need to turn off my Alta every night?
No, you don't need to turn it off. The Alta automatically enters sleep mode when you're not wearing it or moving, which uses almost no battery. You can leave it on 24/7 and still get five to seven days of battery life between charges.
Will my Alta track sleep if I leave it on overnight?
Yes, the Alta tracks sleep automatically while it's on and you're wearing it. You don't need to do anything special or turn on a sleep mode. Just wear it to bed and the device will record your sleep duration and quality in the Fitbit app.