The quickest way to reboot your Charge 2
A reboot clears temporary glitches that slow down your Charge 2 or cause it to freeze. To reboot, plug the tracker into its charging cable and hold the button on the left side of the device for 8 to 10 seconds. You will see the Fitbit logo appear on the screen, then the device will vibrate. Release the button and let it finish restarting—this takes about 30 seconds total.
You do not need to fully charge the device first, though having at least 50 percent battery makes the process smoother. The tracker will restart even if it is powered off completely, as long as it has enough charge to display the logo.
Key Takeaways
- Plug your Charge 2 into its charging cable, then press and hold the left button for 8 to 10 seconds until you see the Fitbit logo.
- A reboot clears freezing, syncing problems, and display glitches without erasing your data or settings.
- The restart takes about 30 seconds from the moment you release the button.
- If the logo does not appear after 10 seconds, your battery may be too low—charge for 15 minutes and try again.
- A reboot is different from a factory reset, which erases all your data and should only be done as a last resort.
When a reboot actually fixes the problem
A reboot works best for temporary software hiccups: the screen freezes mid-activity, the tracker stops responding to button presses, or it will not sync with your phone even though Bluetooth is on. These are signs the operating system has gotten stuck, not that the hardware is broken.
Rebooting also helps if your Charge 2 is draining battery much faster than usual, or if the display is showing garbled text or missing segments. After the restart, the device reloads its core software fresh, which usually clears these issues within one or two reboots.
If the problem returns within a few hours, or if rebooting does not change anything, the issue is likely hardware-related or a corrupted app on your phone. In that case, move to the troubleshooting steps below before considering a factory reset.
What happens to your data during a reboot
A reboot does not erase any of your data. Your step count, heart rate history, sleep records, and all your settings stay exactly as they were. The device straightforward restarts its operating system, the same way restarting a computer does not delete your files.
Your Charge 2 will still be paired to your phone and your Fitbit account after the reboot. You do not need to re-enter your password or set up the device again. The only thing that resets is the current activity timer on the screen—if you were in the middle of logging a workout, that session will be lost, but your historical data remains.
Troubleshooting if the reboot does not work
If you hold the button for 10 seconds and the Fitbit logo never appears, your battery is too low to complete the restart. Plug the device in and leave it charging for at least 15 minutes, then try the reboot again. The logo should appear within 3 to 4 seconds on the second attempt.
If the logo appears but the device freezes during the restart (the screen goes black and stays black for more than a minute), unplug it, wait 10 seconds, and plug it back in. Then try the reboot one more time. This double-restart clears a deeper software jam.
If your Charge 2 still will not respond after two reboots, try unpairing it from your phone and re-pairing it. Open the Fitbit app on your phone, go to your device settings, and select "Forget This Device." Then set up the Charge 2 again as if it were new. This forces your phone and tracker to rebuild their connection, which fixes sync and communication problems that a straightforward reboot cannot reach.
The difference between a reboot and a factory reset
A reboot restarts the software while keeping all your data and settings. A factory reset erases everything—your step history, heart rate data, custom clock faces, and all settings—and returns the device to the state it was in when it left the factory. You should only factory reset if rebooting, unpairing, and re-pairing have all failed.
To factory reset a Charge 2, plug it in and hold the button for 10 to 12 seconds (longer than a reboot). The screen will show a progress bar, then the Fitbit logo will appear again. When the logo disappears, the reset is complete and the device will ask you to set it up from scratch. This process takes about two minutes total.
After a factory reset, you will need to pair the Charge 2 to your phone again and re-enter your personal information (age, weight, height) so the device can calculate calories and distance accurately. Your historical data is still stored in your Fitbit account online, so you will not lose it permanently—it just will not appear on the device itself until you re-pair.
When to contact Fitbit support
If your Charge 2 will not turn on at all, even after charging for 30 minutes, the battery may be permanently dead. Fitbit devices have a limited battery lifespan (usually 3 to 5 years of daily use), and if the battery no longer holds a charge, rebooting will not help. Contact Fitbit support through their website to discuss repair or replacement options.
If the screen is cracked, the button is stuck, or the device is physically damaged, a reboot will not fix the hardware problem. Fitbit support can tell you whether the device is still under warranty and what your repair costs would be.
Frequently Asked Questions
Will rebooting my Charge 2 erase my steps and heart rate data?
No. A reboot only restarts the software. All your historical data, including steps, heart rate, sleep, and workouts, stays on the device and in your Fitbit account. Only a factory reset erases data, and that should only be done as a last resort.
How often should I reboot my Charge 2?
You do not need to reboot regularly. Only reboot when the device freezes, stops responding, or has syncing problems. Most users reboot once or twice a year, if at all. If you find yourself rebooting more than once a month, the device may have a deeper hardware or software issue.
Can I reboot my Charge 2 without the charging cable?
No. The reboot process requires the device to be plugged into the charging cable. The cable provides the power needed to restart the operating system safely. You cannot reboot using just the battery.
What if my Charge 2 is stuck on the Fitbit logo after a reboot?
Unplug the device, wait 30 seconds, and plug it back in. Then try the reboot again. If it gets stuck on the logo a second time, your device may need a factory reset. If the factory reset also does not work, contact Fitbit support—the device may have a hardware fault.
Do I need to reboot before syncing my Charge 2 to a new phone?
No. You can sync to a new phone without rebooting first. Just open the Fitbit app on the new phone, go to set up a device, and follow the pairing steps. A reboot is only necessary if syncing is failing or the device is not responding.