The quickest way to reboot your Fitbit Charge HR

A reboot clears temporary glitches that slow down your tracker or stop it from syncing with your phone. The Fitbit Charge HR reboots in about 10 seconds using a single button combination — no app needed, and you keep all your data.

Plug your Charge HR into its charging cable. While it is charging, press and hold the button on the left side of the tracker for 8 to 10 seconds. You will see the Fitbit logo appear on the screen, then a few seconds later the tracker will vibrate. Release the button. The reboot is complete when you see the main clock face again — this usually takes 10 to 15 seconds total.

Your tracker does not need to be fully charged to reboot, but it should have at least 10 to 15 percent battery. If the screen stays blank or does not respond after you release the button, plug it in for a few minutes and try again.

Key Takeaways

  • Plug your Charge HR into the charging cable before you start, because the reboot process requires power.
  • Press and hold the left button for 8 to 10 seconds while the tracker is plugged in until you see the Fitbit logo.
  • The tracker will vibrate and show the clock face when the reboot is finished — this takes about 10 to 15 seconds.
  • A reboot erases no data; all your steps, heart rate, and sleep records stay on the device.
  • If the screen does not respond after rebooting, try charging for a few minutes and repeat the process.

When your Charge HR needs a reboot

A reboot fixes most problems that happen during normal use. If your tracker is not syncing to your phone, the screen is frozen, or the device is responding slowly to button presses, a reboot usually solves it in seconds.

You do not need to reboot after a software update — the tracker handles that on its own. You also do not need to reboot if you just want to clear your daily step count or reset a specific stat; those are done through the Fitbit app instead. A reboot is only for when the device itself is not working right.

What happens to your data during a reboot

A reboot does not erase anything. All your steps, heart rate data, sleep records, and personal settings stay exactly as they were. The reboot only clears the device's temporary memory — the same memory that gets cleared every time you turn off a computer.

Your data syncs to the Fitbit app and the Fitbit servers automatically, so even if something went wrong with the device, your information is backed up. After the reboot, your tracker will sync again the next time it connects to your phone.

Troubleshooting if the reboot does not work

If the screen stays completely black after you hold the button for 10 seconds, the battery may be too low. Plug the tracker in and leave it charging for 15 to 20 minutes, then try the reboot again. A completely drained battery sometimes needs a few minutes before the device will respond.

If the screen shows something but does not respond to button presses, try holding the button for a full 15 seconds instead of 10. Some devices need the longer press, especially if they have been frozen for a while. If the tracker still does not reboot after two attempts, the device may have a hardware problem and you may need to contact Fitbit support.

Do not try to reboot without the charging cable plugged in. The Charge HR requires power to complete the reboot process, and attempting it on battery alone will not work.

The difference between a reboot and a factory reset

A reboot (what you just did) restarts the device and keeps all your data. A factory reset erases everything — your personal settings, your step history, your heart rate records — and returns the tracker to the state it was in when it left the factory. You almost never need a factory reset.

Only do a factory reset if Fitbit support specifically tells you to, or if you are selling or giving away the device and want to remove your personal information. A factory reset is done through the Fitbit app, not on the device itself, and it cannot be undone.

Syncing after a reboot

After the reboot is complete, your tracker will sync to your phone the next time Bluetooth is turned on and the Fitbit app is open. You do not need to do anything — the sync happens automatically in the background.

If you want to sync right away, open the Fitbit app on your phone and pull down on the screen to refresh. The app will connect to your tracker within a few seconds. If the sync still does not happen after 30 seconds, try turning Bluetooth off and back on, then opening the app again.

Frequently Asked Questions

Will I lose my step count if I reboot?

No. A reboot does not erase any data. Your step count, heart rate, sleep records, and all other information stay on the device. The reboot only clears temporary memory that the device uses to run, similar to restarting a phone.

How often should I reboot my Charge HR?

You only need to reboot when something is not working right — the screen is frozen, it is not syncing, or it is running slowly. Most people never reboot their tracker, or only do it once or twice a year when a problem comes up. Rebooting every day is not necessary and will not improve performance.

Can I reboot without the charging cable?

No. The Charge HR must be plugged into the charging cable for the reboot to work. The device needs power to complete the restart. If you try to reboot on battery alone, nothing will happen.

What if my tracker is stuck on the Fitbit logo screen?

Unplug it from the charging cable and wait 30 seconds, then plug it back in. If it is still stuck on the logo after another 30 seconds, try holding the button for 15 seconds while it is plugged in. If the screen does not change after that, the device may need a factory reset through the Fitbit app, or contact Fitbit support.

Does rebooting fix syncing problems?

Usually yes. If your tracker is not sending data to your phone, a reboot clears the connection error and lets the device sync again. After the reboot, open the Fitbit app and pull down to refresh. If syncing still does not work after that, try turning Bluetooth off and back on on your phone.