The fastest way to reset your Fitbit Charge 2
A factory reset of your Fitbit Charge 2 erases all data and returns the device to its original state. You do this by holding the button on the left side of the tracker for 10 to 12 seconds until you see the Fitbit logo appear on the screen, then release. The device will vibrate and restart — this takes about 30 seconds total. After the reset completes, you will need to pair it again with the Fitbit app on your phone.
A reset is useful when the tracker freezes, stops syncing with your phone, or behaves erratically. It does not fix hardware damage, but it clears software problems that a straightforward restart cannot solve. If you are selling or giving away the device, a reset removes your personal data before the new owner sets it up.
Key Takeaways
- Hold the left-side button for 10 to 12 seconds until the Fitbit logo appears, then release and wait for the device to restart.
- A reset erases all stored data on the device, including activity history, but does not affect data already synced to your Fitbit account online.
- After reset, you must pair the Charge 2 with the Fitbit app again before it will track or sync.
- If the device does not respond to a button hold, try charging it for at least 15 minutes first, as a completely drained battery may prevent reset.
What happens to your data when you reset
The reset erases everything stored directly on the Charge 2 itself — activity logs, heart rate records, sleep data, and any custom settings you configured. However, any data that synced to your Fitbit account before the reset remains in your online account and will not be deleted.
If you have not synced recently, you will lose the activity from the last few days or weeks, depending on when the last sync occurred. To avoid losing data, open the Fitbit app and force a sync before you reset. In the app, go to your profile, select your device, and tap the sync icon (usually a circular arrow) at the top of the screen.
Step-by-step reset instructions
Before you start: Make sure the Charge 2 has at least 20 percent battery. If it is below that, plug it into the charging cable for 15 to 20 minutes first.
To reset: Locate the button on the left side of the tracker (the side without the screen). Press and hold it firmly. Count to 10 slowly, then continue holding for another 2 to 3 seconds. You should see the Fitbit logo appear on the screen — this is your signal to release the button. The device will vibrate once or twice and the screen will go dark. Wait 30 seconds without touching it. The Fitbit logo will reappear, followed by a brief animation, and then the device is ready to pair.
If nothing happens after 12 seconds, release and try again. Some users need to hold slightly longer or press harder. If the device still does not respond after three attempts, charge it for 30 minutes and try once more.
Pairing the Charge 2 after reset
Once the reset is complete, the tracker will not track or sync until you pair it with the Fitbit app again. Open the Fitbit app on your phone and tap the plus icon (usually in the top right or bottom right, depending on your phone's operating system). Select "Set up a device" and choose Charge 2 from the list.
The app will search for your device by Bluetooth. When it finds it, you will see your Charge 2 listed. Tap it to connect. The pairing process takes about one minute. Once complete, your device will begin syncing data to your account, and you can resume normal use.
When to try a restart instead of a reset
If your Charge 2 is frozen or unresponsive, try a straightforward restart before doing a full reset. A restart clears temporary glitches without erasing your data. Hold the button for 3 to 5 seconds — shorter than a reset — until the screen goes dark. Release and wait 10 seconds. The device will restart with all your data intact.
Use a restart first if the tracker is slow, the screen is not responding to taps, or syncing is delayed. If a restart does not fix the problem after two attempts, then move to a full reset.
Troubleshooting a reset that will not work
If the device does not respond when you hold the button, the battery may be completely drained. Plug the Charge 2 into the charging cable and leave it connected for at least 30 minutes. The screen may remain blank during charging — this is normal. After 30 minutes, try the reset again.
If the device still will not reset after charging, try a different USB port on your computer or a different power adapter. Some charging cables wear out and do not make good contact. If you have access to another Fitbit charging cable, try that. If the device charges but still will not reset, the hardware may be damaged and the device may need replacement.
Frequently Asked Questions
Will I lose my activity history if I reset?
Data stored on the device itself will be erased, but any activity that synced to your Fitbit account before the reset stays in your account. Sync the app before you reset to keep as much history as possible. You can view all synced data in the Fitbit app or on the Fitbit website after the reset.
How long does a reset take?
The button hold takes about 10 to 12 seconds, and the device restart takes another 30 seconds. Total time is roughly one minute from start to finish. Pairing with the app afterward takes another one to two minutes.
Can I reset my Charge 2 without the app?
Yes. The reset itself requires only the button on the device — you do not need the app for that step. However, you will need the Fitbit app to pair the device after the reset so it can sync and track again.
What if I forgot my Fitbit password after reset?
Go to the Fitbit login page on a web browser and click "Forgot your password?" Enter your email address and Fitbit will send you a link to create a new password. Once you reset your password, use it to log in to the app and pair your Charge 2 again.
Does reset remove the Fitbit account from the device?
Yes. The reset removes all account information from the device. When you pair it again, you will log in with your Fitbit credentials, and the device will reconnect to your existing account or create a new one depending on which email you use.