The two ways to reset your Fitbit Charge HR

A soft reset (restarting the device) fixes most problems—freezing, syncing failures, or a blank screen. A factory reset erases all data and returns the tracker to its original state, which you need only if you are selling it, giving it away, or the soft reset did not work.

The soft reset takes 10 seconds and keeps your data. The factory reset takes about a minute and wipes everything. Start with the soft reset unless you have a specific reason to erase the device.

Key Takeaways

  • A soft reset restarts your Charge HR without erasing data and fixes most freezing or syncing problems in under a minute.
  • To soft reset, plug the tracker into its charging cable, hold the button on the back for 10 to 15 seconds until you see the Fitbit logo, then release.
  • A factory reset erases all stored data and returns the device to factory settings, which you should do only before selling or giving away the tracker.
  • After any reset, you will need to reconnect the Charge HR to the Fitbit app on your phone to resume syncing.

How to soft reset your Charge HR

Plug the charging cable into the back of the tracker. The metal contacts on the back of the device should align with the two metal prongs on the cable. You will see a small LED light appear when the connection is find.

While the tracker is plugged in, press and hold the button on the back of the device. Keep holding it for 10 to 15 seconds. You will see the Fitbit logo appear on the screen, followed by a brief vibration. Release the button when ready after the vibration stops.

Unplug the charging cable. The tracker will restart and return to the main clock screen within a few seconds. This is the soft reset—your steps, heart rate data, and all settings remain on the device.

When a soft reset fixes common problems

A soft reset solves freezing (the screen does not respond to button presses), a blank or stuck display, syncing failures (the app shows "last synced" from hours ago), or the tracker not turning on after sitting unused. If your Charge HR is stuck on the Fitbit logo screen or shows a low battery icon that will not go away, a soft reset usually clears it.

If the soft reset does not fix the problem after two attempts, wait 30 minutes and try once more. If the issue persists after that, a factory reset is the next step.

How to factory reset your Charge HR

Plug the charging cable into the back of the tracker. Hold the button on the back for 10 to 15 seconds until you see the Fitbit logo, then release. This is the same motion as a soft reset.

when ready press the button again (do not hold it). The screen will show a progress bar that says "Clearing data" or similar text. This process takes 30 to 60 seconds. Do not unplug the cable or press any buttons while the progress bar is running.

When the progress bar finishes, the tracker will show the Fitbit logo again, then the setup screen. Unplug the cable. The factory reset is complete—all your data, settings, and personal information have been erased.

What happens after you reset

After a soft reset, your Charge HR will sync with the Fitbit app the next time your phone is nearby and the app is open. You do not need to do anything else. Your data continues from where it left off.

After a factory reset, the tracker will ask you to set it up again when you open the Fitbit app. You will choose your time zone, units (miles or kilometers), and other preferences. The app will then begin collecting new data. Any data that was on the device before the reset is gone permanently.

Common mistakes to avoid

Do not unplug the cable while the Fitbit logo is on the screen during a soft reset—wait for the vibration to finish first. If you unplug too early, the reset may not complete and you will need to try again.

Do not hold the button during a factory reset after the initial soft reset. Holding it continuously will restart the soft reset process instead of triggering the factory reset. Press the button once after the Fitbit logo appears, then let go.

Do not assume a factory reset is necessary if the soft reset did not work on the first try. Many users see results on the second or third attempt, especially if the device was very low on battery.

Frequently Asked Questions

Will I lose my data if I do a soft reset?

No. A soft reset only restarts the device, like restarting a phone. All your steps, heart rate history, and settings stay on the tracker. You will not lose anything.

Can I factory reset without the charging cable?

No. The Charge HR must be plugged in to perform either a soft reset or a factory reset. The cable provides the power needed to complete the process safely.

How long does it take to sync after a reset?

A soft reset usually syncs within a few minutes of opening the Fitbit app on your phone, as long as Bluetooth is on. A factory reset may take 5 to 10 minutes to sync for the first time because the app is setting up the device again.

What if the reset screen is frozen and I cannot see the progress bar?

Unplug the cable, wait 30 seconds, and try the factory reset again from the beginning. If the screen remains frozen after a second attempt, the device may have a hardware issue and a reset will not fix it.

Do I need to unpair the Charge HR from the app before resetting?

No. A soft reset does not require you to unpair anything. For a factory reset, you can unpair the device from the app first if you want, but it is not required—the reset will disconnect it automatically.