The quickest way to restart your Fitbit Alta
A restart clears temporary glitches without erasing your data. To restart your Fitbit Alta, plug it into the charging cable and hold down the button on the back of the device for 8 to 10 seconds. You will see the Fitbit logo appear on the screen, then the device will vibrate. Release the button and let it finish restarting — this takes about 30 seconds total.
The button is small and sits on the underside of the band where it meets the tracker. You may need to angle the device or use a fingernail to reach it comfortably. The device must be plugged in during the restart; it will not work on battery power alone.
Key Takeaways
- Hold the back button for 8 to 10 seconds while the device is plugged into its charging cable to restart.
- A restart erases nothing — your steps, heart rate data, and account settings stay on the device.
- The restart is complete when you see the Fitbit logo and feel a vibration, which takes about 30 seconds.
- If the device still does not respond after a restart, try charging it fully before attempting again.
When to restart instead of factory reset
A restart fixes most common problems: the screen freezes, the device stops tracking, or it will not sync with your phone. You should try a restart first because it takes 30 seconds and keeps all your data intact.
A factory reset erases everything on the device and returns it to the state it left the factory. You only need a factory reset if a restart does not work, or if you are selling or giving away the device. For a factory reset, hold the button for 10 to 15 seconds instead — you will see the Fitbit logo twice, and the second time it appears the device is being erased.
Troubleshooting if the restart does not work
If the device does not respond when you hold the button, the battery may be completely drained. Plug it in and leave it charging for at least 15 minutes, then try the restart again. The device needs enough power to complete the restart sequence.
If the screen is completely black and the device does not vibrate after you hold the button, try a different charging cable or a different USB port on your computer. A loose connection can prevent the device from receiving power. Once you see any sign of life — even a faint logo — the restart is working.
If the device restarts but still will not sync with the Fitbit app, the problem is usually the connection between the device and your phone, not the device itself. Check that Bluetooth is turned on, that you are signed into the correct Fitbit account, and that the app is up to date.
What happens to your data during a restart
A restart does not touch your data. Your step count, heart rate history, sleep records, and all other information stored on the device remain exactly as they were. Your account settings, alarms, and any custom watch faces also stay in place.
The only thing a restart does is stop and restart the operating system running on the device — similar to restarting a computer. It clears temporary files and resets any processes that may have frozen or gotten stuck.
How to know if your restart was successful
A successful restart shows three clear signs: the Fitbit logo appears on the screen, the device vibrates once, and the screen returns to normal within 30 seconds. After that, the device should respond normally to button presses and should sync with your phone when you open the Fitbit app.
If the device restarts but still does not work the way it should, wait a few minutes and try syncing again. Sometimes the device and app need a moment to reconnect after a restart. Open the Fitbit app, swipe down from the top of the screen, and wait for the sync to finish.
Preventing problems that need a restart
Keep your Fitbit Alta charged above 20 percent battery whenever possible. A device that runs completely out of power sometimes has trouble restarting properly. Charge it every few days rather than waiting until the battery is nearly gone.
Sync your device with the app at least once a week. A device that has not synced in a long time is more likely to develop glitches. Syncing also backs up your data to your Fitbit account, so even if something goes wrong with the device, your history is safe.
Frequently Asked Questions
Will a restart erase my steps and activity data?
No. A restart only restarts the software running on the device. All your data — steps, heart rate, sleep, calories, and everything else — stays on the device and in your Fitbit account. You will not lose anything.
How long does a restart take?
About 30 seconds from the moment you hold the button until the device is ready to use again. You will see the Fitbit logo appear after a few seconds, and the device will vibrate to signal the restart is complete.
Can I restart the device without plugging it in?
No. The device must be connected to the charging cable for a restart to work. The button press alone will not trigger a restart — the device needs power from the cable to complete the process.
What if I hold the button too long by accident?
If you hold it longer than 10 seconds, you may trigger a factory reset instead of a restart. A factory reset erases all your data. If this happens, you can restore your data from your Fitbit account by signing back in and syncing the device with the app.
Should I restart my Fitbit Alta regularly?
Only restart when you notice a problem — the device freezes, stops tracking, or will not sync. Regular restarts are not necessary and will not improve performance. Restart only when you need to fix something.