The Two Ways to Restart Your Fitbit Charge 2
A restart clears temporary glitches without erasing your data. The Fitbit Charge 2 has two restart methods: a soft reset (which you do through the device itself) and a hard reset (which wipes everything and returns it to factory settings). Most of the time, a soft reset fixes freezing, unresponsive screens, or syncing problems. A hard reset is only necessary if the device is completely unresponsive or you are preparing to sell or give away the tracker.
This guide covers both methods so you can choose the right one for your situation. Neither method requires a computer or special tools.
Key Takeaways
- A soft reset takes about 10 seconds and keeps all your data, activity history, and settings intact.
- A hard reset erases everything on the device and returns it to the state it was in when new.
- A soft reset fixes most common problems like a frozen screen or missed syncs.
- You can perform either restart using only the device itself—no app or computer needed.
How to Do a Soft Reset
A soft reset is the gentler option and the one to try first. It takes about 10 seconds and leaves all your data untouched. Hold down the back button (the small button on the left side of the tracker) for about 10 seconds until you see the Fitbit logo appear on the screen. The device will vibrate once, and the screen will go blank for a moment. Release the button and wait about 30 seconds for the tracker to finish restarting.
Once the Fitbit logo disappears and your clock face returns, the soft reset is complete. Your steps, heart rate data, and all personal settings remain exactly as they were. You do not need to re-pair the device with your phone or re-enter any information.
How to Do a Hard Reset
A hard reset erases all data and settings from the device. Use this only if the soft reset did not work or if you are preparing to give the tracker to someone else. Hold down the back button for about 10 to 15 seconds. You will see the Fitbit logo, then a second screen that says "Clear user data?" with a checkmark icon. Release the button when you see this screen.
Tap the screen or press the back button again to confirm. The device will vibrate and display a progress bar as it erases all information. This process takes about one minute. Once it finishes, the Charge 2 will restart and show the setup screen, just as it did when brand new. You will need to pair it with your phone and the Fitbit app again before you can use it.
When to Use Each Restart Method
Use a soft reset if your tracker is frozen, the screen is not responding to taps, syncing is not working, or the device feels sluggish. A soft reset solves most everyday problems and takes only seconds. It is also the safe choice if you are unsure—since it does not erase anything, there is no downside to trying it first.
Use a hard reset only if the soft reset did not work, the device is completely unresponsive even after a soft reset, or you are giving the tracker to someone else and want to remove all your personal data. A hard reset is also useful if you are experiencing persistent bugs that a soft reset cannot fix. Be aware that you will lose all activity history, personal settings, and any custom clock faces you have set up.
What to Do After a Restart
After a soft reset, your Charge 2 should work normally. If the problem persists, try restarting your phone and opening the Fitbit app to force a fresh sync. Sometimes the issue is on the phone side, not the tracker. If syncing is still not working, try removing the device from the app (go to your profile, select your device, and choose "Remove this device"), then re-pair it by opening the app and tapping the plus icon to add a new device.
After a hard reset, you will see a setup screen. Open the Fitbit app on your phone, tap the plus icon to add a new device, and follow the pairing steps. The app will walk you through connecting the Charge 2 to your phone via Bluetooth. Once paired, your device is ready to use, though you will be starting with zero activity data and will need to reset any custom settings like your daily step goal or alarm times.
Troubleshooting If the Restart Does Not Work
If the back button does not respond or the device does not restart after holding the button for 15 seconds, the battery may be completely drained. Plug the Charge 2 into its charging cable and let it charge for at least 30 minutes, then try the soft reset again. A completely dead battery can prevent the device from responding to button presses.
If the device still will not restart after charging, or if it restarts but the same problem returns when ready, the hardware may be failing. At that point, contact Fitbit support through the Fitbit app or website. Fitbit offers a limited warranty that covers hardware defects, and support can tell you whether your device qualifies for a replacement or repair.
Frequently Asked Questions
Will a soft reset erase my activity data?
No. A soft reset keeps all your steps, heart rate history, sleep data, and personal settings. Only a hard reset erases data, and it erases everything on the device.
How long does a restart take?
A soft reset takes about 10 to 15 seconds from start to finish. A hard reset takes about one minute because it has to erase all the data on the device before restarting.
Do I need to re-pair my Charge 2 after a soft reset?
No. A soft reset does not affect the pairing between your device and phone. Your Charge 2 will stay connected to the Fitbit app and will sync normally once the restart is complete.
What should I do if my Charge 2 is stuck on the Fitbit logo screen?
Let the device sit for a few minutes—sometimes it is still restarting in the background. If the logo does not disappear after five minutes, try a soft reset again. If that does not work, charge the device for 30 minutes and try once more.
Can I restart my Charge 2 from the app instead of the device?
No. The Fitbit app does not have a restart or reset option. You must use the back button on the device itself to perform either a soft or hard reset.