The fastest way to restart your Fitbit

Most Fitbit devices restart by holding the button on the left side for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then releasing. The exact button location and hold time vary slightly by model — a Charge 5 uses the left button, while an Inspire 3 uses a single button on the side. If your device has a touchscreen, you may not see a physical button; in that case, plug it into the charger and hold the button for the same duration.

A restart clears temporary glitches that cause the device to freeze, stop syncing with your phone, or display incorrect data. It does not erase your stored data or settings. Your steps, heart rate history, and personal preferences remain on the device and in the Fitbit app after a restart.

If a straightforward restart does not fix the problem, a factory reset is the next step — but that does erase everything on the device and returns it to its original state. Most issues resolve with a restart alone.

Key Takeaways

  • Hold the left button or side button for 10 to 15 seconds until the Fitbit logo appears, then release to restart.
  • A restart does not erase your data, steps, or settings — it only clears temporary software glitches.
  • If your device has a touchscreen and no visible button, plug it into the charger and hold the button while charging.
  • A restart usually fixes freezing, syncing failures, and incorrect readings without needing to set up the device again.

Restart steps by Fitbit model

Fitbit Charge 5, Charge 6, and Inspire 3: Press and hold the left button for 10 to 15 seconds. Release when you see the Fitbit logo on the screen. The device will power off and back on.

Fitbit Sense and Sense 2: Press and hold the left button for 10 to 15 seconds until the Fitbit logo appears. These touchscreen models respond the same way as button-based devices.

Fitbit Versa 3 and Versa 4: Press and hold the left button for 10 to 15 seconds. The logo will appear and the device will restart.

Fitbit Ace 3 (for children): Press and hold the side button for 10 to 15 seconds until the Fitbit logo shows. Release and wait for the device to power back on.

If you own an older model like the Fitbit Flex 2, Ionic, or original Inspire, the restart process is the same: hold the button for 10 to 15 seconds until the logo appears. Check your device's manual or the Fitbit support website if you are unsure which button to use.

When to restart instead of factory reset

A restart is the right choice when your Fitbit freezes, stops responding to taps, fails to sync with the app, or displays data that seems wrong (like step counts that do not match your movement). These are almost always temporary software hiccups that a restart clears in under a minute.

A factory reset is necessary only if a restart does not work, the device will not turn on at all, or you are preparing to sell or give away the Fitbit. A factory reset erases all your data, so use it only as a last resort or when you intend to remove the device from your account permanently.

Most people never need a factory reset. If your device acts up, restart it first and see whether the problem goes away. If it does, you are done.

Restart your Fitbit if it will not sync

A common reason to restart is when the Fitbit app on your phone stops receiving data from the device. The device may show your steps and heart rate on its own screen, but the app shows old numbers or says the device is disconnected.

Restart the Fitbit first. Then close the Fitbit app completely on your phone (swipe it away from the app switcher, do not just minimize it). Wait 30 seconds, then open the app again. In most cases, the two devices will reconnect and sync within a few seconds.

If syncing still fails after a restart, check that Bluetooth is turned on in your phone's settings and that the Fitbit app has permission to use Bluetooth. On some phones, you may also need to "forget" the Fitbit in your phone's Bluetooth settings and let the app re-pair it.

Restart your Fitbit if the screen is frozen

If the screen is stuck on one image and does not respond to button presses or taps, a restart is the fastest fix. Hold the button for the full 10 to 15 seconds even if nothing seems to happen — the device may appear unresponsive for several seconds before the logo appears.

Do not give up early. If you release the button before 10 seconds, the restart will not begin. Count slowly to 15 if you are unsure, or watch for the Fitbit logo to confirm the restart has started.

After the logo appears, the device will turn off and back on. This usually takes 30 seconds to a minute. Once it powers back on, the screen should respond normally to your taps and button presses.

What happens to your data during a restart

Your step count, heart rate history, sleep data, and all other information stored on the Fitbit device stays on the device during a restart. The Fitbit app on your phone also keeps all your historical data. A restart only clears the device's temporary memory — the part that holds what is currently running.

Your personal settings, like your goal steps, clock face choice, and notification preferences, also remain unchanged. You will not need to set up the device again or re-enter your information.

The only time data is erased is during a factory reset, which is a different process. A restart is safe to do as many times as you need without any risk of losing information.

Frequently Asked Questions

How long does a Fitbit restart take?

The restart process takes 30 seconds to one minute from the moment you release the button. You will see the Fitbit logo appear within a few seconds, then the device will power off and back on. Once the screen lights up again, the restart is complete and the device is ready to use.

Will restarting my Fitbit erase my steps and data?

No. A restart keeps all your data, including steps, heart rate, sleep records, and settings. Only a factory reset erases data, and that is a separate process you would do intentionally. A restart is safe and does not affect any information on the device or in the app.

What if the Fitbit logo does not appear when I hold the button?

Make sure you are holding the correct button — usually the left button or the single side button depending on your model. Hold it for the full 10 to 15 seconds without releasing early. If the logo still does not appear, try charging the device for 15 minutes, then attempt the restart again. A low battery can prevent the restart from showing the logo.

Can I restart my Fitbit while it is charging?

Yes. For touchscreen models without a visible button, you must restart while the device is plugged into the charger. Hold the button while the device is on the charger for 10 to 15 seconds until the logo appears. For button-based models, you can restart whether the device is charging or not.

Do I need to restart my Fitbit regularly for maintenance?

No. Restart your Fitbit only when you notice a problem, such as freezing, syncing failures, or incorrect data. Regular restarts are not necessary and will not improve performance. Most devices run smoothly without any restarts over their lifetime.