The Fitbit Charge 2 does not have a power button — you put it in sleep mode instead
The Fitbit Charge 2 is designed to stay on all the time. There is no dedicated off switch or power button on the device itself. Instead, you can put it into sleep mode, which stops the screen from lighting up and pauses activity tracking until you wake it again. If you want to fully power down the device, you will need to connect it to a charger and use the Fitbit app on your phone.
Most of the time, sleep mode is all you need. The device uses very little battery when sleeping, and it will automatically wake when you move your wrist or tap the screen. The battery typically lasts five to seven days between charges, so you rarely need to shut it down completely.
Key Takeaways
- The Fitbit Charge 2 has no power button; sleep mode is the normal way to stop the screen from turning on.
- To enter sleep mode, press and hold the button on the left side of the device for three seconds until you see a moon icon.
- The device will wake automatically when you move your wrist or tap the screen, even in sleep mode.
- To fully power down the device, connect it to the charger and hold the button for ten seconds until the Fitbit logo appears and disappears.
- Sleep mode uses almost no battery, so you do not need to turn off the device between regular charges.
How to put your Charge 2 into sleep mode
Sleep mode is the easiest way to stop your Charge 2 from displaying the time and tracking activity temporarily. Press and hold the button on the left side of the device for about three seconds. You will see a moon icon appear on the screen, which means sleep mode is now active. The screen will go dark and stay dark until you wake the device.
To wake the device from sleep mode, tap the screen or move your wrist sharply. The display will light up and resume showing the time and your activity data. Sleep mode does not erase any of your data — everything you tracked before sleep mode remains on the device and syncs to the Fitbit app when you wake it.
How to fully power down the Charge 2
If you want to completely shut down the device rather than just put it to sleep, you will need to connect it to the charging cable first. Plug the Charge 2 into the USB charger that came with it. Once it is connected, press and hold the button on the left side for about ten seconds. You will see the Fitbit logo appear on the screen, and then it will disappear — this means the device is powering off.
When the device is fully powered down, the screen will be completely blank and no lights will appear. To turn it back on, press and hold the button again for three seconds while it is still on the charger. The Fitbit logo will appear, and the device will restart. After it powers back on, you can disconnect it from the charger and use it normally.
When to use sleep mode versus full shutdown
For everyday use, sleep mode is the right choice. It uses almost no battery power, and the device wakes when ready when you need it. You should use sleep mode when you are sleeping at night, during a shower, or anytime you do not want the screen to turn on accidentally.
Full shutdown is rarely necessary unless you are storing the device for a long time or troubleshooting a problem. If your Charge 2 is frozen or not responding to button presses, powering it down completely and restarting it often fixes the issue. You might also fully power down the device if you are not planning to wear it for several weeks and want to preserve the battery completely.
Common mistakes when trying to turn off the Charge 2
The most common mistake is pressing the button too quickly. Sleep mode requires a steady three-second hold — a quick tap will not set up it. If you press the button once, you will just see the menu appear instead. Make sure you hold the button down continuously until the moon icon shows up on the screen.
Another mistake is expecting the device to stay off without the charger. If you power down the Charge 2 while it is not plugged in, it will automatically turn back on within a few seconds. The device is designed to stay powered on, so full shutdown only works while the device is connected to the charger. Once you disconnect it, the device will power back up on its own.
Some people also confuse the button on the left side with the charging contacts on the back. The button is a small raised circle on the left edge of the device — not the metal pads on the back where the charger connects. Make sure you are pressing the correct button.
What happens to your data when you turn off the Charge 2
Sleep mode does not affect your data at all. Any steps, heart rate, or sleep information recorded before you entered sleep mode stays on the device. When you wake the device, it will continue tracking from where it left off.
Full shutdown also preserves all your data. When you power the device back on, all your tracked information is still there. The data syncs to the Fitbit app on your phone whenever the device is connected to your phone via Bluetooth, whether the device is in sleep mode or fully powered on. You will not lose anything by turning off the device.
Troubleshooting if the button does not respond
If pressing and holding the button does not put the device into sleep mode or power it down, the device may be frozen. Try charging it for at least 15 minutes, then attempt the button press again. Sometimes a low battery prevents the device from responding to commands.
If the device still does not respond after charging, try a hard reset. While the device is on the charger, press and hold the button for 10 to 15 seconds. You may see the Fitbit logo appear and disappear multiple times. Keep holding until the screen goes completely blank. This forces the device to restart and often fixes unresponsive buttons.
Frequently Asked Questions
Does sleep mode drain the battery?
No. Sleep mode uses almost no battery power. Your Charge 2 will stay in sleep mode for days without losing a noticeable amount of charge. You can safely leave it in sleep mode overnight or during the day without worrying about the battery draining.
Will I miss notifications if the device is in sleep mode?
Yes. When the Charge 2 is in sleep mode, it does not display notifications, alarms, or incoming calls. The device will still record activity data in the background, but you will not see alerts on the screen. If you need to receive notifications, wake the device by tapping the screen or moving your wrist.
Can I turn off the Charge 2 without a charger?
No. The Charge 2 can only be fully powered down while it is connected to the USB charger. If you disconnect it from the charger, the device will automatically power back on. For most situations, sleep mode is the practical alternative since it uses almost no battery.
What if my Charge 2 will not wake up from sleep mode?
Try tapping the screen firmly or moving your wrist in a sharp motion. If the device still does not wake, try charging it for 15 minutes — a low battery can prevent the device from waking. If it still does not respond, connect it to the charger and perform a hard reset by holding the button for 10 to 15 seconds.
Is it bad to leave the Charge 2 in sleep mode all the time?
No. Sleep mode is designed for regular use and will not damage the device. You can leave it in sleep mode between charges without any problems. The device will still sync data to your phone and maintain accurate time while in sleep mode.