Press and hold the button to power on your Fitbit watch
Your Fitbit watch turns on by pressing and holding the side button — the one physical button on the device. Hold it down for three to five seconds until you see the Fitbit logo appear on the screen. The logo will flash, then your watch will show the time or a startup screen. That means it is powered on.
If your watch does not respond after holding the button, the battery may be completely drained. Plug it into the charging cable that came in the box and wait 15 to 20 minutes before trying again. A completely dead Fitbit usually needs a short charge before it will respond to any button press.
Once the watch powers on, you will see either the time display or a pairing screen if this is your first time setting it up. Either way, the device is now active and ready for the next step.
Key Takeaways
- Press and hold the side button for three to five seconds until the Fitbit logo appears on the screen.
- If the watch does not respond, charge it for 15 to 20 minutes using the cable that came in the box.
- A powered-on watch will display the time or a setup screen, depending on whether it has been paired before.
- The side button is the only physical control on most Fitbit watches and handles both power and navigation.
What to do if your watch is already set up
If your Fitbit has been paired to your phone before, pressing the button once will wake the screen from sleep mode without fully powering it off. The watch enters sleep mode automatically after a few minutes of no activity to save battery. A single button press wakes it so you can see the time or check your stats.
Holding the button down again for three to five seconds will fully power off the watch. You will see a power-off confirmation screen. This is different from sleep mode — a powered-off watch will not track activity or receive notifications until you turn it back on.
Pairing your watch to the Fitbit app on your phone
After your watch powers on for the first time, it will prompt you to pair it with the Fitbit app. read the Fitbit app to your phone from the Apple App Store or Google Play Store, then open it and create or sign into your Fitbit account.
The app will search for your watch automatically. When it finds it, the app will display your watch model and ask you to confirm the pairing. Tap "Pair" in the app, and your watch will show a confirmation code on its screen. The pairing usually completes within 30 seconds. Once paired, your watch will sync activity data to the app whenever it is in range of your phone.
Charging your Fitbit before first use
New Fitbit watches ship with some battery charge, but not always enough to complete setup. If your watch powers on but the battery icon shows very low, charge it before pairing. Use the charging cable included in the box — it connects magnetically to the back of the watch.
A full charge takes one to two hours depending on the model. While charging, your watch may display a charging icon or go dark. Leave it plugged in until the battery icon shows full or the screen stops showing the charging symbol. Once fully charged, your watch will hold power for several days of normal use.
Troubleshooting a watch that will not turn on
If holding the button produces no response and the watch has been charging for 20 minutes, try a force restart. Press and hold the button for 10 to 15 seconds — longer than the normal startup. You may see the Fitbit logo flash or the screen go black before the logo reappears. This resets the watch's software without erasing your data.
If the watch still does not respond after a force restart and a full charge, the device may have a hardware problem. Contact Fitbit support through the app or the Fitbit website. They can walk you through additional troubleshooting or arrange a replacement if the watch is under warranty.
Understanding battery life and power modes
Most Fitbit watches run for four to seven days on a single charge with normal use. Battery life depends on how often you use the screen, whether notifications are turned on, and which watch model you own. Older or smaller models may last longer because they have simpler displays.
Your watch will show a low battery warning when the charge drops below 10 percent. At that point, you have a few hours of use left before the watch powers off completely. Plug it in as soon as you see the warning to avoid losing a day of activity tracking.
Frequently Asked Questions
How long does it take to fully charge a Fitbit watch?
Most Fitbit watches charge fully in one to two hours using the magnetic charging cable. Smaller models may charge faster. You will know it is fully charged when the battery icon on the screen shows 100 percent or stops changing.
Can I turn off my Fitbit watch to save battery?
Yes, holding the button for three to five seconds will power it off completely. However, a powered-off watch will not track steps or activity. Most people use sleep mode instead — the watch enters this automatically after a few minutes and uses very little battery while still tracking.
What if my watch turns on but the screen is blank?
The screen may be off even though the watch is powered on. Try pressing the button once to wake the display. If the screen remains blank after that, try a force restart by holding the button for 10 to 15 seconds. If it stays blank after charging, contact Fitbit support.
Do I need to turn on my Fitbit every time I wear it?
No. Once your Fitbit is set up and paired, it stays on automatically. It enters sleep mode when you are not using it but continues tracking activity in the background. You only need to manually power it on if you previously powered it off.
Can I use my Fitbit without pairing it to my phone?
Your watch will track basic activity like steps and heart rate without pairing, but you will not see the data on a screen or in the app. Pairing to your phone lets you view all your stats, set goals, and receive notifications. Most people pair their watch during first setup.