The quickest way to power down your Fitbit
Most Fitbit devices do not have a traditional power button. Instead, you turn them off by holding down the button on the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then release. The device will vibrate and show a power-down screen. On some older models like the Fitbit Charge or Charge 2, you may need to hold the button even longer — up to 20 seconds.
If your Fitbit has a side button (like the Inspire or Sense), press and hold that button. If it has a bottom button (like the Flex 2 or Alta), hold that one instead. The location changes by model, but the hold-and-wait method works across nearly all Fitbit trackers.
After the device powers down, it will not sync data or track activity until you turn it back on. You restart it the same way: hold the button until the Fitbit logo appears again.
Key Takeaways
- Hold the button on your Fitbit for 10 to 20 seconds until the Fitbit logo appears, then release to power it off.
- The button location depends on your model — check the side or bottom of the device if you are unsure which one to press.
- Your Fitbit will not track activity or sync data while powered down.
- Restarting uses the same method: hold the button until the logo shows again.
- You do not need to turn off your Fitbit regularly — the battery is designed to run for several days between charges.
Why you might want to turn your Fitbit off
Most people do not need to power down their Fitbit at all. The devices are built to run for days on a single charge, and turning them off does not extend battery life significantly. However, there are a few situations where powering down makes sense.
If your Fitbit is malfunctioning — freezing, not syncing, or showing incorrect data — a full power-down and restart often fixes the problem. This is the first troubleshooting step Fitbit support recommends. You might also turn off your device if you are sending it in for repair or if you plan not to wear it for an extended period and want to preserve the battery.
Some users power down their Fitbit before flying, though this is not required. The device does not interfere with aircraft systems, but turning it off ensures it will not accidentally sync or send notifications during the flight.
Restarting your Fitbit after powering it down
To turn your Fitbit back on, use the exact same method: hold the button for 10 to 20 seconds. You will see the Fitbit logo appear on the screen, and the device will vibrate. Release the button and wait a few seconds for the device to fully boot up.
After restart, your Fitbit will reconnect to your phone automatically if Bluetooth is on and the Fitbit app is running. Any data collected before the shutdown will still be there — powering off does not erase your history or settings.
What to do if the button hold does not work
If holding the button for 20 seconds does not produce the Fitbit logo, your device may be frozen or unresponsive. Try charging it for at least 15 minutes, then attempt the power-down sequence again. A low battery can sometimes prevent the shutdown screen from appearing.
If the device still does not respond after charging, try a different approach: plug it in and hold the button continuously for 30 seconds without releasing. Some Fitbit models require a longer hold when the battery is critically low.
If none of these steps work, your Fitbit may have a hardware problem. Contact Fitbit support through the Fitbit app or visit their website to report the issue and explore repair or replacement options.
Charging versus powering off
Turning off your Fitbit is different from charging it. When you plug your device into a charger, it continues to run — you will see the charging icon on the screen. Powering off stops all functions, including the display and sensors.
You do not need to turn off your Fitbit to charge it. In fact, most users charge their devices overnight while wearing them or while powered on. The device will charge faster if it is off, but the difference is usually only a few minutes.
Model-specific button locations
The button you hold varies slightly by Fitbit model. On the Fitbit Sense, Versa, and Ionic, the button is on the left side of the device. On the Inspire and Inspire 2, it is also on the side. For the Charge 4 and Charge 5, the button is on the right side.
Older models like the Flex 2 and Alta have a button on the bottom or back of the band. If you are unsure which button to press, check the quick-start guide that came with your device or search for your specific model on the Fitbit support website, where you will find diagrams showing the exact button location.
Frequently Asked Questions
Does turning off my Fitbit save battery?
Powering off your Fitbit does preserve the battery, but the difference is minimal since Fitbit devices are designed to run for days between charges. You only need to turn it off if you plan not to wear it for a week or longer, or if you are troubleshooting a problem.
Will I lose my data if I turn off my Fitbit?
No. Powering off your device does not erase any data. All your activity history, settings, and personal information remain stored on the device and will be there when you turn it back on.
How long does it take to turn a Fitbit off?
The shutdown process takes about 10 to 20 seconds of holding the button. Once you release, the device powers down when ready. Restarting takes a similar amount of time.
Can I turn off my Fitbit from the app instead of the device?
No. There is no power-off option in the Fitbit app. You must use the physical button on the device itself to shut it down.
What if my Fitbit turns off by itself?
If your device powers down without you holding the button, the battery may be critically low. Charge it when ready. If it continues to shut down on its own even after a full charge, contact Fitbit support — this may indicate a hardware fault.