Most Fitbits use a coin-cell battery you can swap yourself in under five minutes

Whether your Fitbit is a Charge, Inspire, or Ace model, the battery replacement process is nearly identical: open the device, remove the old coin-cell battery, and insert a new one of the same type. You do not need special tools or a technician. The whole job takes longer to find a small Phillips screwdriver than to do the work itself.

The specific battery type depends on your model. Charge and Charge HR models use a CR2032. Inspire and Inspire HR use a CR2032 as well. Ace uses a CR2032. Blaze uses a CR2450. Check your device manual or the Fitbit support page for your exact model to confirm the battery code before you buy a replacement.

Key Takeaways

  • Most Fitbit models use a CR2032 coin-cell battery that you can buy at any drugstore or supermarket for two to five dollars.
  • You need only a small Phillips screwdriver and a flat tool like a butter knife or plastic spoon to open the device and pry out the old battery.
  • The battery sits in a metal holder inside the device; slide it out, replace it with the new one in the same direction, and close the case.
  • If your Fitbit does not power on after replacement, the battery may be installed backwards or the contacts may need cleaning with a dry cloth.

What you need to buy and gather

A replacement coin-cell battery costs between two and five dollars at any pharmacy, grocery store, or online retailer. Buy the exact type your model uses — CR2032 for most Fitbits, CR2450 for Blaze. Do not guess; the wrong size will not fit or will not power the device.

You also need a small Phillips screwdriver (the kind with a cross-shaped tip) and a flat tool to pry open the case. A butter knife, plastic spoon, or old credit card works. Do not use a sharp metal tool that could scratch the device or slip and damage the battery contacts inside.

How to open your Fitbit and remove the old battery

Turn off your Fitbit or let the battery drain completely. Locate the seam on the back of the device where the case splits. On Charge and Inspire models, you will see a small screw or two near the bottom of the back panel. Use your Phillips screwdriver to remove these screws and set them somewhere you will not lose them.

Slide your flat tool gently into the seam between the front and back of the case. Work your way around the edge, explore steady pressure until the back panel pops free. Do not force it; if it resists, you may have missed a screw. Once the case is open, you will see the battery sitting in a metal holder, usually in the center or lower part of the device.

The battery is held in place by a metal clip or spring. Gently slide or pry the old battery out of its holder. Note which side was facing up — the positive side (marked with a plus sign) should face the same direction when you insert the new battery. If the battery is stuck, use your flat tool to nudge it out, but do not poke at the circuit board or contacts.

Installing the new battery and closing the case

Before you insert the new battery, wipe both sides with a clean, dry cloth. Dust or moisture on the battery or contacts can prevent the device from powering on. Slide the new battery into the holder with the positive side facing the same direction as the old one was facing. The battery should sit flat and click into place.

Press the back panel of your Fitbit back onto the front until you hear or feel a click. Align the screw holes and use your Phillips screwdriver to tighten the screws. Do not over-tighten; you only need them snug enough to hold the case closed. Turn on your Fitbit or press the button to wake it. The screen should light up within a few seconds.

What to do if your Fitbit does not turn on after battery replacement

If the device does not power on, the most common cause is the battery installed backwards. Open the case again and check that the positive side (the side with the plus sign) is facing the same direction it was before. Remove the battery, wipe both sides and the metal contacts with a clean, dry cloth, and reinsert it.

If the device still does not turn on, the battery itself may be defective. Try a different new battery of the same type. If you have access to another Fitbit of the same model, test your new battery in that device to confirm it works. If the battery works in another device but not yours, the problem is likely with the contacts or circuit board inside your original Fitbit, and you may need to contact Fitbit support or consider replacing the device.

How often you need to replace the battery

A coin-cell battery in a Fitbit typically lasts between five and seven days of normal use, depending on the model and how often you use features like GPS or heart-rate monitoring. Some models claim up to ten days. Once the battery runs low, the device will show a low-battery warning on the screen or stop responding to button presses.

If your Fitbit is losing battery much faster than that — draining in one or two days — the device may have a hardware problem, or a background process may be running constantly. Try restarting the device by holding the button for ten seconds. If the battery still drains quickly after replacement, contact Fitbit support.

Where to buy replacement batteries

CR2032 and CR2450 batteries are sold at nearly every pharmacy, supermarket, and drugstore in the United States. Check the battery aisle or the section near the watch counter. Online retailers including Amazon, Walmart, and Target stock them as well. A pack of two or four batteries costs three to eight dollars.

Buy from a reputable seller. Counterfeit batteries exist and may not hold a charge or may leak inside your device. Stick to major retailers or the manufacturer's official store. If you buy from a third-party seller on Amazon or another marketplace, check the reviews for mentions of authenticity.

Frequently Asked Questions

Can I replace the battery myself or do I need to send it to Fitbit?

You can replace it yourself. The process takes five minutes and requires only a screwdriver and a flat tool. Fitbit does not offer a battery replacement service; you either replace it yourself or buy a new device.

What if I lose a screw when I open the case?

Small replacement screws for Fitbit devices are sold online. Search for "Fitbit [your model] replacement screw" and you will find packs of several for two to five dollars. If you cannot find the exact screw, a standard small Phillips screw of the same length from a hardware store may work, though it may not fit as snugly.

Is it safe to use a Fitbit while the battery is charging?

Fitbit batteries are not rechargeable. You replace them, not charge them. Once you install a new coin-cell battery, it will power the device until it runs out, at which point you replace it again.

What should I do with the old battery?

Coin-cell batteries contain chemicals and should not go in the trash. Most pharmacies and retailers that sell batteries also accept old batteries for recycling. Call ahead to confirm, or check your city or county's hazardous waste disposal program for a drop-off location near you.

Will replacing the battery erase my data?

No. Your Fitbit stores data on the device itself, and replacing the battery does not affect the memory. Your steps, heart rate, and other logged data will remain after you install the new battery and power the device back on.