Change the time and date through the Fitbit app on your phone

The fastest way to update your Fitbit's time and date is through the Fitbit mobile app. Open the app, tap the profile icon in the bottom right corner, select your device, and scroll to "Time Zone". Choose your current time zone from the list. The device syncs automatically once you confirm, and the time and date update within a few seconds.

This method works for all Fitbit models — Charge, Inspire, Sense, Versa, and Ace. The app handles the date change at the same time as the time zone change, so you do not need to adjust them separately. If your device does not sync when ready, open the Fitbit app again and check that Bluetooth is turned on.

The time zone setting is the only way most Fitbit devices let you change the time manually. Unlike older fitness trackers, Fitbits do not have a settings menu on the device itself where you can punch in numbers. Everything goes through the phone app.

Key Takeaways

  • Open the Fitbit app, tap your profile icon, select your device, and choose "Time Zone" to update both time and date at once.
  • Your Fitbit syncs the new time automatically once you confirm the time zone change in the app.
  • If the time does not update, turn Bluetooth off and back on, then open the Fitbit app again.
  • Daylight saving time changes happen automatically if your phone's time zone setting is correct.
  • You cannot change the time directly on the Fitbit device itself — all changes must go through the mobile app.

Why your Fitbit time might be wrong

Fitbits pull their time from your phone, not from a network connection. If your device shows the wrong time, your phone's time zone is usually set incorrectly, or your Fitbit has not synced with your phone in a while. Travel, a dead battery, or a long period without opening the app can all cause the time to drift.

When you change time zones — say, flying from New York to Los Angeles — your phone updates automatically if location services are on. Your Fitbit should follow within minutes of the next sync. If it does not, manually open the Fitbit app and refresh the time zone setting.

Sync your Fitbit after changing the time zone

After you change the time zone in the app, your Fitbit syncs automatically if Bluetooth is on and your phone is nearby. The sync usually takes less than a minute. You will see a brief notification on your phone when the sync completes.

If the time on your Fitbit still shows the old time after five minutes, try these steps: turn off Bluetooth on your phone, wait ten seconds, turn it back on, and open the Fitbit app again. This forces a fresh connection and often clears a stuck sync.

If the problem persists, restart your Fitbit. The restart method depends on your model — for most devices, hold the button on the side for ten seconds until you see the Fitbit logo. For Versa and Sense models, swipe down from the top of the screen, tap Settings, scroll to About, and tap Restart.

Daylight saving time changes automatically

You do not need to manually adjust your Fitbit when daylight saving time begins or ends. As long as your phone's time zone is set correctly, your Fitbit updates automatically on the day the change happens. The sync happens in the background without any action from you.

If your Fitbit shows the wrong time after a daylight saving change, check that your phone's automatic time zone setting is on. On iPhone, go to Settings > General > Date & Time and turn on "Set Automatically". On Android, go to Settings > System > Date & Time and turn on "Automatic date & time".

What to do if your Fitbit will not sync

A Fitbit that will not sync may not update its time even after you change the time zone in the app. Start by checking that Bluetooth is on and that your phone is within 30 feet of the device. Then close the Fitbit app completely and open it again.

If the app still will not sync, unpair your Fitbit from your phone and pair it again. On iPhone, go to Settings > Bluetooth, find your Fitbit, tap the info icon, and select "Forget This Device". On Android, go to Settings > Connected Devices, find your Fitbit, and tap "Unpair". Then open the Fitbit app and follow the pairing steps as if setting up a new device. Your data stays on the Fitbit and syncs once pairing is complete.

As a last resort, restart your Fitbit and your phone. Restart your phone normally. For your Fitbit, hold the button for ten seconds (or use the restart menu in Settings, depending on your model). Wait for both devices to fully power back on, then open the Fitbit app and let them sync.

Different Fitbit models and time settings

All current Fitbit models — Charge 6, Inspire 3, Sense 2, Versa 4, and Ace 3 — change their time through the app's time zone setting. Older models like the Charge 5, Inspire 2, and Versa 3 work the same way. The process is identical across all of them.

If you own an older Fitbit from several years ago, like a Charge 2 or Versa 1, the time zone setting is still in the app under your device profile. The steps are the same: profile icon, your device, time zone. Even very old Fitbits do not have a manual time-setting button on the device itself.

Frequently Asked Questions

Can I change the time on my Fitbit without the app?

No. Fitbits do not have a time or date setting on the device itself. You must use the Fitbit mobile app to change the time zone, which then updates both the time and date automatically.

Why does my Fitbit show the wrong time even after I changed the time zone?

Your Fitbit may not have synced yet. Make sure Bluetooth is on, close and reopen the Fitbit app, and wait a minute for the sync to complete. If it still shows the wrong time, restart your Fitbit by holding the side button for ten seconds.

Does my Fitbit update automatically when I travel to a different time zone?

Yes, if your phone's location services are on and your phone updates to the new time zone automatically. Your Fitbit syncs with your phone within minutes and shows the correct time for your new location.

What if my Fitbit time is off by one hour after daylight saving time?

Check that your phone's automatic time zone setting is turned on. On iPhone, go to Settings > General > Date & Time and enable "Set Automatically". On Android, go to Settings > System > Date & Time and enable "Automatic date & time". Then open the Fitbit app to sync.

How long does it take for a Fitbit to update its time after I change the time zone?

Usually less than a minute once Bluetooth syncs. If your Fitbit does not update within five minutes, turn Bluetooth off and back on, then open the Fitbit app again to force a fresh sync.