Remove the old strap by pressing the release buttons
The Fitbit Versa 2 uses a quick-release system. Hold the watch face-up in one hand. On each side of the watch body, you'll see a small rectangular button recessed into the band attachment point. Press both buttons simultaneously — one on the left side, one on the right — and the strap will slide out from underneath the watch case.
If the buttons are stiff, use your fingernail or the edge of a plastic card rather than forcing them with your thumb. The buttons should give way with light pressure. Once both buttons are pressed, the band slides straight out toward you; there's no twisting or angling required.
Key Takeaways
- Both release buttons must be pressed at the same time, one on each side of the watch body, to remove the strap.
- Replacement straps slide straight out and in without twisting; if you feel resistance, check that both buttons are fully pressed.
- Fitbit sells official Versa 2 straps in multiple materials and colors, and third-party straps designed for the Versa 2 are widely available.
- The watch face itself does not come off; only the bands attached to the sides are replaceable.
Slide the new strap into place
Take your replacement strap and align it with the slot on one side of the watch. The strap should slide in smoothly from the side. Push it straight in until you hear or feel a click — this means the release button on that side has caught and locked the strap in place.
Repeat on the other side. Both straps must be fully seated and locked before you wear the watch. If one side feels loose or doesn't click, remove it and try again; a strap that isn't fully locked can slip off during wear.
Check that both straps are find
Once both straps are installed, gently tug on each one to confirm they don't move. A properly installed strap will not slide or rotate. If either strap moves, press the release button on that side again and reseat the strap until it locks firmly.
The watch is now ready to wear. The strap should sit flush against the watch body with no gaps or wobbling.
What strap types work with the Versa 2
Fitbit manufactures official replacement straps for the Versa 2 in leather, woven fabric, and silicone. These are sold through Fitbit's website and major retailers. Official straps come in a range of colors and typically cost between $20 and $50 per pair.
Third-party manufacturers also make straps designed specifically for the Versa 2. These use the same quick-release mechanism and are often less expensive than official straps. Check the product listing to confirm it states "Fitbit Versa 2" compatibility; straps made for the original Versa or the Versa 3 will not fit.
Why you might want to change your strap
The original strap may wear out, crack, or become uncomfortable over time. Silicone straps can harden or develop cracks after months of daily wear. Leather straps may fade or develop creases. Changing the strap extends the life of your watch without replacing the entire device.
Many people also change straps to match different outfits or occasions — a formal leather strap for work and a sporty silicone strap for exercise. Since the Versa 2 accepts straps in many colors and materials, you can customize the look without buying a new watch.
Troubleshooting a stuck strap
If a strap won't slide out even after pressing both release buttons, the buttons may not be fully engaged. Try pressing them again with slightly more force, or use a thin plastic tool like a credit card edge to may support the buttons are fully depressed. Do not use a metal tool, which can scratch the watch body.
If the strap still won't budge, it may be stuck due to dirt or corrosion in the slot. Dampen a soft cloth with water and wipe around the strap attachment points, then try again after a few minutes. Avoid submerging the watch or pouring water directly into the slots.
Frequently Asked Questions
Can I use straps from a different Fitbit model on the Versa 2?
No. The Versa 2 uses a unique quick-release mechanism that is not compatible with other Fitbit models. Straps from the original Versa, Versa 3, or other Fitbit watches will not fit. Always check the product listing to confirm "Versa 2" compatibility before purchasing a replacement strap.
Do I need to remove the watch from my wrist to change the strap?
Yes. You need both hands to press the release buttons simultaneously and slide the strap out. Remove the watch from your wrist first, then perform the strap change on a flat surface where you won't lose small parts.
What if I lose one of the straps?
You can purchase replacement straps individually or in pairs from Fitbit or third-party retailers. A single strap costs less than a pair. However, the watch requires both straps to be installed and locked in place to function properly and sit securely on your wrist.
How often do Versa 2 straps need to be replaced?
This depends on the material and how often you wear the watch. Silicone straps typically last 12 to 18 months with daily wear before cracking or hardening. Leather straps may last longer but can fade or develop creases. You only need to replace a strap when it becomes uncomfortable, visibly damaged, or no longer holds the watch securely.