Access the Display Settings Through the Fitbit App
To change what appears on your Fitbit Versa 4 screen, you need to use the Fitbit app on your phone — the watch itself does not have a settings menu for this. Open the app, tap the profile icon in the bottom right corner, then select your Versa 4 from the list of devices. From there, tap "Display" to see all the options you can customize.
The Display section in the app controls what information shows on your watch face, how the screen brightness behaves, and which data fields appear during workouts. Every change you make syncs to your watch within a few seconds, so you do not need to manually transfer anything.
Key Takeaways
- Open the Fitbit app, go to your profile, select your Versa 4, and tap Display to reach all customization options.
- You can choose from multiple built-in watch faces and customize which data fields (steps, heart rate, calories) appear on each one.
- Brightness settings include automatic adjustment based on light, or you can lock it to a fixed level to save battery.
- Changes made in the app sync to your watch when ready without any manual steps on the device itself.
Choose and Customize Your Watch Face
The Versa 4 comes with several built-in watch faces, and you can switch between them directly from the Display menu in the Fitbit app. Tap "Watch Face" to see thumbnails of each option. Select the one you want, and it appears on your watch within seconds. Some faces show the time only, while others display multiple data fields like steps, heart rate, or calories burned at a glance.
Once you pick a watch face, you can customize which information appears on it. Tap "Customize" under the watch face name to add or remove data fields. For example, you might want to see your step count and current heart rate but hide the weather. The app shows you exactly what each field will look like on the watch before you save it.
Adjust Brightness and Screen Behavior
Brightness settings are also in the Display menu. You have two options: automatic brightness, which adjusts based on how bright your surroundings are, or manual brightness, where you set a fixed level. Automatic mode is the default and uses the watch's light sensor to keep the screen readable without draining the battery unnecessarily.
If you prefer manual control, drag the brightness slider to your preferred level. Lower brightness saves battery life but may make the screen harder to read in bright sunlight. Higher brightness uses more power but ensures you can see the display clearly at any time of day. You can change this setting anytime without affecting other functions.
Set Up Data Fields for Workouts
When you start a workout on your Versa 4, the watch displays specific information relevant to that activity — distance, pace, calories, heart rate, and so on. You can customize which fields appear during each type of workout through the Fitbit app. Go to your device settings, find the workout type you want to adjust, and select which data fields to show.
This is useful if you run regularly but do not care about pace, or if you cycle and want to see distance and elevation but not calories. The app lets you set different field layouts for different activities, so your running workout display looks different from your cycling display. Changes take effect the next time you start that workout type.
Manage Always-On Display Settings
The Versa 4 has an always-on display option, which keeps the watch face visible at all times instead of going dark when you lower your wrist. This feature drains the battery faster but means you can glance at the time without raising your wrist. You can turn always-on display on or off in the Display settings within the Fitbit app.
When always-on display is active, the screen dims to save power but remains visible. The brightness level you set in the manual brightness option applies to the always-on state as well. If you turn on always-on display and notice your battery drains much faster than usual, switching back to the default behavior (screen goes dark until you raise your wrist) will extend battery life significantly.
Troubleshoot Display Changes That Do Not Sync
If you change a setting in the Fitbit app but it does not appear on your watch, first check that your phone and watch are connected. Open the Fitbit app and look at the device status — it should show "Connected" next to your Versa 4. If it shows "Disconnected," turn Bluetooth off and back on on your phone, then open the app again.
If the connection is active but changes still are not syncing, try restarting the watch. Press and hold the back button (on the left side of the watch) for about 10 seconds until you see the Fitbit logo appear. Once the watch restarts, open the Fitbit app and check whether your display changes have now taken effect. This usually resolves sync issues without losing any of your data.
Frequently Asked Questions
Can I read new watch faces from outside the Fitbit app?
No. The Versa 4 only uses watch faces that come built into the Fitbit app. You cannot sideload or read faces from third-party sources. However, Fitbit regularly adds new faces through app updates, so check the app store periodically for updates to access additional options.
Does changing the display drain the battery faster?
Certain settings do use more power. Always-on display, maximum brightness, and automatic brightness (which uses the light sensor) all drain the battery faster than the default settings. If battery life is a concern, use manual brightness at a lower level and keep always-on display turned off.
What happens if I customize a watch face and then switch to a different one?
Your customizations are saved to that specific watch face. If you switch to another face and then switch back, your original customizations will still be there. Each watch face stores its own data field layout independently.
Can I change the display directly on the watch without using the app?
No. The Versa 4 does not have a settings menu on the device itself. All display customization must be done through the Fitbit app on your phone. This design choice keeps the watch interface straightforward and prevents accidental changes.