The quickest way to update your Fitbit's time and date
Your Fitbit syncs its time and date automatically when you open the Fitbit app on your phone, as long as your phone's own time and date are correct. If your Fitbit is showing the wrong time or date, the fastest fix is to open the Fitbit app, let it sync, and wait a few seconds. The device pulls the correct information from your phone during that sync.
If automatic sync does not work, you can change the time and date manually through the Fitbit app settings. This takes about two minutes and works the same way on both Android and iPhone, though the exact menu names differ slightly between the two.
The manual route is also necessary if you travel across time zones and your Fitbit does not update on its own, or if you notice the date drifting after several months of use.
Key Takeaways
- Open the Fitbit app on your phone and let it sync to your device — this usually fixes time and date problems without any manual steps.
- If sync does not work, go to your device settings in the Fitbit app, find the time and date option, and toggle automatic time on or off to force a refresh.
- Make sure your phone's own time and date are correct before syncing, because your Fitbit copies the information from your phone.
- After you change the time or date, close and reopen the Fitbit app to confirm the change took effect on your device.
How to sync time automatically through the Fitbit app
Start by opening the Fitbit app on your phone. Tap the profile icon in the bottom right corner (on iPhone) or the menu icon in the top left (on Android). Scroll down and select your device name — for example, "Fitbit Charge 6" or "Fitbit Sense 2".
Once you are in your device settings, look for a section called "Time" or "Date and Time". On most devices, you will see a toggle for "Automatic time" or "Set time automatically". Make sure this toggle is turned on. Your Fitbit will then pull the correct time and date from your phone the next time the app syncs.
To force an when ready sync, swipe down from the top of the Fitbit app (iPhone) or tap the sync icon if visible (Android). Wait five to ten seconds for the sync to complete. Your Fitbit should now display the correct time and date.
Manually setting the time and date on your Fitbit
If automatic sync is already on but your Fitbit still shows the wrong time, try turning the automatic setting off and then back on. Open the Fitbit app, go to your device settings, and find the time option. Toggle "Automatic time" off, wait a few seconds, then toggle it back on. This forces the app to resync and often clears time drift.
If that does not work, some Fitbit models let you set the time manually. In the same time and date menu, look for an option to set the time or date by hand. Tap the field, enter the correct time using the on-screen controls, and save. The process varies slightly between Fitbit models — older devices like the Fitbit Inspire 3 have simpler manual controls, while newer models like the Fitbit Sense 2 rely more heavily on automatic sync.
After you make any change, close the Fitbit app completely and reopen it. This ensures the app sends the updated information to your device and confirms the change took effect.
Why your Fitbit time might be wrong in the first place
The most common reason is that your phone's time and date are incorrect. Your Fitbit cannot set itself — it always copies the time from your phone during sync. If your phone is set to the wrong time zone or has drifted by an hour or more, your Fitbit will match it exactly.
The second reason is that automatic sync is turned off. This can happen if you disabled it by accident or if you switched phones and did not re-enable it on the new device. Check your device settings in the Fitbit app to confirm the automatic time toggle is on.
Traveling across time zones sometimes causes a delay. Your Fitbit may not update when ready when you land in a new zone. Manually toggling automatic time off and on again usually fixes this within a minute.
What to do if your Fitbit still shows the wrong time after syncing
First, check your phone's time and date settings directly. On iPhone, go to Settings > General > Date and Time and make sure "Set Automatically" is on. On Android, go to Settings > System > Date and Time and turn on "Automatic date and time". Your Fitbit cannot be more accurate than your phone.
Next, try unpairing and repairing your Fitbit. In the Fitbit app, go to your device settings, scroll to the bottom, and select "Remove this device". Then go through the pairing process again as if it were a new device. This clears any sync errors that may have built up over time.
If the time is still wrong after repairing, your Fitbit may have a hardware issue. Contact Fitbit support through the app — tap the profile icon, scroll down, and select "Help and Support". They can walk you through additional troubleshooting or discuss a replacement if your device is still under warranty.
Time and date settings for different Fitbit models
Most current Fitbit models — including the Charge 6, Sense 2, Inspire 3, and Versa 4 — handle time the same way: automatic sync through the app. The steps above work for all of them.
Older models like the Fitbit Inspire 2 or Charge 5 also sync automatically but may have slightly different menu names in the app. Look for "Device Settings" rather than the device name, and then find "Time" or "Date and Time". The principle is the same — toggle automatic time on, sync, and the device updates.
If you own an older Fitbit and cannot find the time setting in the app, check the device's own menu. Some older models let you change the time directly on the device itself using the buttons or touchscreen. Press and hold the button on the side of the device, navigate to Settings, and look for Time or Date. This is slower than using the app but works when the app sync fails.
Frequently Asked Questions
Why does my Fitbit time change when I travel?
Your Fitbit copies the time from your phone. When you travel and your phone updates to the new time zone, your Fitbit should update automatically during the next sync. If it does not, manually toggle automatic time off and on in the Fitbit app to force an when ready update.
Can I set my Fitbit to a different time zone than my phone?
No. Your Fitbit always matches your phone's time and cannot be set independently. If you need your Fitbit to show a different time, you would have to change your phone's time zone, which affects all apps and functions on your phone.
How often does my Fitbit sync with the app?
Your Fitbit syncs whenever you open the Fitbit app and keep it open for a few seconds. It also syncs automatically in the background if you have background sync enabled in the app settings. This means time updates usually happen within minutes of your phone's time changing.
What if I see the time on my Fitbit but not the date?
Some Fitbit watch faces show only the time, not the date. The date is still stored correctly on your device — it just is not displayed on that particular face. Switch to a different watch face in the Fitbit app to see if the date appears. Go to your device settings, select "Clock Face", and choose a face that includes the date.
Does my Fitbit need to be charged for the time to update?
No. Your Fitbit keeps the correct time even when the battery is very low. However, if your Fitbit battery is completely dead and stays off for several weeks, it may lose the time and date. Once you charge it and sync with the app, it will pull the correct information again.