The Fitbit Charge 2 uses a proprietary charging cable, not USB
The Fitbit Charge 2 charges through a small magnetic dock that connects to a USB power source. The dock has two metal contacts that align with corresponding contacts on the back of the tracker. You do not plug the tracker itself into anything — the magnetic connection holds it in place while power flows through those contacts.
The charging cable comes in the box with your Charge 2. It is a short USB cable with a small rectangular dock at the end. If you have lost the original cable, you will need to buy a replacement Fitbit Charge 2 charging cable; standard USB cables will not work because the dock is specific to this model.
Key Takeaways
- The Charge 2 charges through a magnetic dock that comes in the box, not through a standard USB port on the device itself.
- A full charge takes about one to two hours and gives you five to seven days of battery life before the next charge is needed.
- The tracker shows a battery icon on its screen when plugged in; a full battery icon means charging is complete.
- If the dock does not hold the tracker magnetically or the screen does not show charging, clean both the dock contacts and the tracker contacts with a dry cloth.
Step-by-step charging process
Locate the charging dock that came with your Charge 2. Plug the USB end into a power source — a wall outlet adapter, a computer USB port, or a USB power bank all work. The other end of the cable has the small rectangular dock.
Hold the Charge 2 so the back of the tracker faces the dock. The dock has two small metal contacts. Align the tracker so these contacts meet the two metal contact points on the back of your Charge 2. The magnetic connection will pull the tracker into place once you are close enough. You should feel a slight snap as the magnets engage.
Once connected, the screen on your Charge 2 will display a battery icon. This icon fills as the battery charges. When the icon is completely full, your tracker is fully charged and ready to wear.
How long charging takes and how long the battery lasts
A full charge of the Fitbit Charge 2 typically takes one to two hours from a completely empty battery. The exact time depends on the power source you use — a wall outlet charges faster than a computer USB port.
Once fully charged, the Charge 2 battery lasts five to seven days under normal use. This means most people charge their tracker once a week. If you use features like continuous heart rate monitoring or GPS tracking more heavily, the battery may drain faster and require charging sooner.
Troubleshooting when the tracker will not charge
If you plug in the dock but the battery icon does not appear on the screen, the contacts may be dirty or misaligned. Remove the tracker from the dock and inspect both the metal contacts on the back of the Charge 2 and the metal contacts on the dock itself. Wipe both sets of contacts gently with a dry, soft cloth — a microfiber cloth works well. Do not use water or cleaning solutions.
After cleaning, try placing the tracker back on the dock. Make sure the back of the tracker is facing the dock and the contacts line up. If the battery icon still does not appear, try a different USB power source. Sometimes a computer USB port does not provide enough power; switching to a wall outlet adapter often solves the problem.
If the dock itself is damaged — if the metal contacts are bent or the plastic is cracked — you will need to replace the charging cable. The original Fitbit Charge 2 charging cable is available from Fitbit's website or from retailers that sell Fitbit accessories.
Where to charge your Charge 2 safely
Charge your Charge 2 in a dry location away from water or moisture. Although the tracker itself is water-resistant for swimming and showering, the charging dock is not. Do not charge near a sink, in a bathroom during a shower, or outdoors in rain.
Avoid charging in extreme heat or cold. A room-temperature environment — between 50 and 95 degrees Fahrenheit — is ideal. Do not leave the tracker charging in a hot car or in direct sunlight for extended periods.
Checking battery level without plugging in
You can see your current battery level on the Charge 2 screen without connecting to the dock. Swipe down from the top of the screen to open the quick settings menu. The battery percentage appears at the top of this menu. This lets you know whether you need to charge soon or if you have several days of use left.
The Fitbit app on your phone also shows your tracker's battery level. Open the Fitbit app, tap the device icon at the bottom, and look for the battery percentage displayed on the device details screen. This is useful if you want to check your battery level before you leave home.
Frequently Asked Questions
Can I charge my Charge 2 with a regular USB cable?
No. The Charge 2 requires the proprietary magnetic dock that came in the box. A standard USB cable will not work because the dock is specifically designed for this model. If you need a replacement, you must purchase a Fitbit Charge 2 charging cable.
Is it bad to leave my Charge 2 on the dock overnight?
No. Once the battery is fully charged, the tracker stops charging and the dock does not overcharge it. Leaving it plugged in overnight is safe and will not damage the battery or the device.
Why does my Charge 2 charge slowly on my computer?
Computer USB ports typically provide less power than wall outlet adapters. If charging is very slow, try plugging the dock into a wall outlet instead. A standard USB power adapter (like those used for phones) will charge your Charge 2 much faster than a computer port.
What should I do if the magnetic dock is not holding the tracker?
First, clean both the dock contacts and the tracker contacts with a dry cloth to remove any dirt or debris. If the dock still does not hold the tracker magnetically, the magnets inside the dock may be weak or damaged. You will need to replace the charging cable with a new Fitbit Charge 2 dock.