The fastest way to pair your Fitbit
To put your Fitbit in pairing mode, open the Fitbit app on your phone, tap your profile icon in the top left, select your device, and choose "Set Up a New Device." Your Fitbit will enter pairing mode automatically when you start this process — you do not need to press buttons or hold anything down. The device will stay in pairing mode for about 15 minutes while it searches for your phone.
If your Fitbit is already set up to a different phone or account, you will need to clear it first. Hold the button on your device for 10 to 15 seconds until you see the Fitbit logo and a vibration. This resets the device and clears the old pairing, then you can follow the setup steps above.
Key Takeaways
- Pairing mode starts automatically when you tap "Set Up a New Device" in the Fitbit app — no manual button presses required.
- Your Fitbit will search for your phone for about 15 minutes before pairing mode times out.
- If your device is already paired to another account, hold the button for 10 to 15 seconds to reset it before you start the setup process.
- Make sure Bluetooth is turned on in your phone's settings and that you are within 30 feet of your Fitbit during pairing.
What happens during pairing mode
When your Fitbit enters pairing mode, it broadcasts a signal that your phone can detect. The Fitbit app searches for nearby devices and displays a list of what it finds. Your device will show up by model name — for example, "Fitbit Charge 6" or "Fitbit Inspire 3" — and you tap it to complete the connection.
The pairing process usually takes 30 seconds to 2 minutes once you select your device. During this time, your Fitbit may vibrate or show a checkmark on its screen. When pairing is complete, the app will ask you to enter your personal information and choose your settings, such as your height, weight, and daily step goal.
Resetting your Fitbit before pairing
If your Fitbit is already paired to another phone or account, you must reset it before you can pair it to a new device. To reset, hold down the button on the side or bottom of your device — the exact location depends on your model — for 10 to 15 seconds. You will feel a vibration and see the Fitbit logo appear on the screen.
After the reset is complete, the screen will go blank or show the Fitbit logo again. At this point, your device is unpaired and ready for setup. Open the Fitbit app on your new phone and start the "Set Up a New Device" process. Your Fitbit will enter pairing mode automatically.
Bluetooth settings you need to check
Before you start pairing, turn on Bluetooth in your phone's settings. Open Settings, find Bluetooth, and toggle it on. You do not need to manually search for your Fitbit in the Bluetooth menu — the Fitbit app handles that part for you. However, if Bluetooth is off, the app cannot find your device at all.
Keep your phone and Fitbit within 30 feet of each other during pairing. Walls and other obstacles can weaken the signal, so if pairing fails, try moving to an open area. If you are still having trouble, restart your phone and try again. Sometimes clearing the Bluetooth cache on your phone helps, though this is rarely necessary.
What to do if pairing mode times out
If your Fitbit does not pair within 15 minutes, pairing mode will time out and your device will stop searching. When this happens, start the setup process again from the Fitbit app. Tap your profile icon, select your device, and choose "Set Up a New Device" once more. Your Fitbit will enter pairing mode again.
Common reasons pairing fails include Bluetooth being off on your phone, your Fitbit being too far away, or interference from other wireless devices. If you keep getting disconnected, try restarting both your phone and your Fitbit. Hold the button on your Fitbit for 10 to 15 seconds to restart it, then open the app and try pairing again.
Pairing a second Fitbit to the same account
You can pair multiple Fitbits to one account if you own more than one device. To add a second Fitbit, open the Fitbit app, tap your profile icon, and select "Set Up a New Device." The app will search for unpaired devices in pairing mode. If your second Fitbit is already paired to the same account, you will need to reset it first by holding the button for 10 to 15 seconds.
Once pairing is complete, the app will ask you to name your device so you can tell them apart — for example, "Fitbit Charge 6 (Bedroom)" and "Fitbit Charge 6 (Work)." You can then switch between devices in the app to see data from each one. Both devices will sync to the same account and share your personal information like height and weight.
Frequently Asked Questions
How long does pairing mode stay on?
Pairing mode stays active for about 15 minutes. If your Fitbit does not pair within that window, pairing mode will turn off and your device will stop searching. You will need to start the setup process again from the Fitbit app to re-enter pairing mode.
Do I need to press a button to put my Fitbit in pairing mode?
No. Pairing mode starts automatically when you tap "Set Up a New Device" in the Fitbit app. You do not need to press or hold any buttons on your device. The only time you hold a button is if you need to reset your Fitbit first.
Can I pair my Fitbit to multiple phones at once?
No. A Fitbit can only be paired to one phone at a time. If you want to use it with a different phone, you must reset the device first, then pair it to the new phone. The data will still be saved to your Fitbit account and will sync once you pair to the new phone.
What if my Fitbit does not show up in the app during pairing?
Make sure Bluetooth is on in your phone's settings and that your Fitbit is within 30 feet. If it still does not appear, restart both your phone and your Fitbit by holding the button for 10 to 15 seconds. Then open the app and try the setup process again.