Restart Your Fitbit Charge HR in Two Steps
A reboot clears temporary glitches that make your Fitbit Charge HR freeze, stop syncing, or fail to respond to taps. The restart process takes about 10 seconds and requires only your device—no computer or app needed. Most problems that feel serious (the screen won't wake, buttons don't work, the display looks stuck) clear up after a reboot.
To reboot, plug your Fitbit Charge HR into its charging cable. Hold down the button on the left side of the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen. Release the button. The device will restart, and you'll see the logo again as it powers back on. This is a soft restart—it does not erase your data or unpair the device from your phone.
Key Takeaways
- A reboot takes 10 to 15 seconds and requires only the charging cable; your data stays on the device.
- Plug in the device first, then hold the left button until the Fitbit logo appears on the screen.
- If the screen is completely black and won't respond, the battery may be drained—charge for at least 15 minutes before attempting a reboot.
- After a reboot, your Fitbit will reconnect to your phone automatically if Bluetooth is on and the Fitbit app is installed.
When Your Screen Is Black or Won't Wake
If the screen shows nothing at all, the battery is likely depleted. Plug the device into the charging cable and leave it connected for at least 15 minutes. During this time, you may see a charging icon appear—a lightning bolt or battery symbol. Once you see any sign of life on the screen, proceed with the reboot steps above.
If the screen still shows nothing after 20 minutes of charging, try a different USB port on your computer or a different power adapter. Some USB ports deliver power too slowly to wake a deeply drained battery. Once the device shows any response, the reboot will usually complete without trouble.
Reboot When the Device Is Frozen or Unresponsive
A frozen Fitbit Charge HR often displays the time but ignores button presses, or shows a stuck screen that doesn't change when you tap it. This usually means the device's processor is caught in a loop and needs to restart. The reboot process is identical: plug in, hold the left button for 10 to 15 seconds, and wait for the logo.
Do not tap or press buttons while the device is rebooting. Let it sit undisturbed for the full 10 to 15 seconds. If you release the button too early, the reboot may not complete, and you'll need to start over. If the device still doesn't respond after a full reboot, wait 30 minutes and try again—sometimes a second attempt is necessary.
What Happens After the Reboot Completes
Once the Fitbit logo disappears and the normal screen returns, the reboot is done. Your device will show the time, your step count, and other data exactly as before. All your stored activity, heart rate records, and settings remain on the device. The reboot does not erase anything or reset your Fitbit to factory settings.
Your Fitbit will automatically reconnect to your phone within a few minutes if Bluetooth is turned on and the Fitbit app is installed. You do not need to re-pair the device or log in again. If you don't see data syncing to the app after 10 minutes, turn Bluetooth off and on again on your phone, then open the Fitbit app.
Common Mistakes That Prevent a Successful Reboot
The most common error is releasing the button too early. The Fitbit logo must appear on the screen before you let go. If you see nothing after 8 seconds, keep holding—it can take the full 15 seconds. Releasing at 5 or 6 seconds will not trigger a reboot, and you'll just turn the screen on normally.
Another mistake is rebooting without plugging in the device first. While a reboot can work on battery power, doing it while plugged in ensures the device has stable power during the restart. If the battery dies mid-reboot, the process may not complete correctly. Always plug in before you start.
Do not hold the button longer than 20 seconds. If you hold past 15 seconds, you may trigger a factory reset instead of a straightforward reboot. A factory reset erases all your data and settings, which is not what you want. If you accidentally hold too long and see a menu or different screen, unplug when ready and try again.
When to Reboot Versus When to Contact Fitbit Support
A reboot solves most temporary problems: frozen screens, buttons that don't work, syncing failures, and displays that won't turn on. If your Fitbit works normally after a reboot, you're done. If the same problem returns within a day or two, a reboot may not be the real fix.
Contact Fitbit support if the device reboots successfully but then freezes again within hours, if the screen cracks or shows physical damage, if the charging cable no longer makes contact with the device, or if the battery drains completely in less than a day. These are signs of a hardware problem that a reboot cannot fix. Fitbit support can walk you through more advanced troubleshooting or discuss replacement options.
Frequently Asked Questions
Will a reboot erase my steps and activity data?
No. A reboot is a soft restart that clears temporary memory but leaves all your stored data on the device. Your steps, heart rate records, sleep data, and settings stay exactly as they were. Only a factory reset erases data, and that requires holding the button for much longer than a normal reboot.
How long does it take for my Fitbit to reconnect to my phone after a reboot?
Usually 2 to 5 minutes if Bluetooth is on and the Fitbit app is open. If it takes longer than 10 minutes, turn Bluetooth off and on again on your phone, then open the app. You do not need to re-pair the device—it remembers your phone automatically.
Can I reboot my Fitbit without the charging cable?
Technically yes, but it's not recommended. A reboot on battery power can fail if the battery is low. Always plug in the device first to may support stable power during the restart. It takes only a few extra seconds and makes the reboot much more reliable.
What if my Fitbit still won't turn on after I reboot it?
Leave it plugged in and charging for at least 30 minutes. If the screen remains completely black after 30 minutes, try a different USB port or power adapter—the original cable or port may be faulty. If the device still shows no response after an hour of charging with a different cable, the battery or display may have a hardware problem, and you should contact Fitbit support.
Do I need to open the Fitbit app to complete the reboot?
No. The reboot happens entirely on the device itself. You don't need your phone, the app, or a computer. Just plug in the Fitbit Charge HR and hold the button. The app will sync automatically once the reboot is done and your phone is nearby with Bluetooth on.