A soft reset fixes most Fitbit Charge HR problems in under a minute
If your Fitbit Charge HR is frozen, unresponsive, or showing a blank screen, a soft reset will usually bring it back to life. A soft reset clears the device's temporary memory without erasing your data or settings. You do this by holding the button on the back of the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then release. The device will restart and you should see the home screen within a few seconds.
This is different from a factory reset, which erases everything on the device. You should only do a factory reset if the soft reset does not work or if you are selling or giving away the device. Most freezes, lag, and connection problems respond to a soft reset alone.
Key Takeaways
- A soft reset takes 10 to 15 seconds and fixes freezing, unresponsiveness, and blank screens without erasing your data.
- Hold the button on the back of the device until the Fitbit logo appears, then release when ready.
- If the soft reset does not work, try unpairing and repairing the device to your phone before attempting a factory reset.
- A factory reset erases all data on the device, so only use it as a last resort or when you no longer need the device.
Step-by-step soft reset for Fitbit Charge HR
Locate the button on the back of your Fitbit Charge HR. It is a small circular button on the underside of the band, near where the device connects to the strap. You do not need to remove the device from your wrist, though some people find it easier to see what they are doing if they do.
Press and hold that button. Keep holding it even if nothing happens on the screen at first. After about 10 to 15 seconds, you will see the Fitbit logo appear in the center of the screen. As soon as you see the logo, release the button. Do not hold it longer than necessary — releasing as soon as the logo appears prevents the device from entering a factory reset mode.
Wait for the device to finish restarting. You should see the home screen (usually showing the time and your step count) within 5 to 10 seconds. If the screen stays blank or shows the logo for more than 30 seconds, try the soft reset again.
What to do if the soft reset does not work
If the device is still unresponsive after a soft reset, the next step is to unpair it from your phone and then pair it again. This clears the connection between the device and your phone's Fitbit app without erasing data on the device itself. Open the Fitbit app on your phone, go to your device settings, and select the option to unpair or remove the device. Then restart the pairing process as if you were setting up the device for the first time.
After you have unaired and repaired, try using the device again. Many connection issues and app crashes resolve once the pairing is fresh. If the device is still not working, charge it fully (connect it to the USB cable for at least two hours) and wait a few hours before trying again. Sometimes the device needs time to recover from a software glitch.
Factory reset: when to use it and what to expect
A factory reset erases all data stored on your Fitbit Charge HR, including your personal settings, activity history, and any custom clock faces you have added. Your data synced to the Fitbit app on your phone will remain there, but anything only on the device will be gone. Only do a factory reset if the soft reset and unpair-repair steps have not worked, or if you are preparing to sell or give away the device.
To perform a factory reset, hold the button on the back for 10 to 15 seconds as you would for a soft reset, but continue holding it for another 10 to 15 seconds after the Fitbit logo appears. You will see a second screen or animation indicating the device is resetting. Release the button and wait for the device to restart. The setup screen will appear, and you will need to pair the device to your phone again as if it were brand new.
Preventing freezes and keeping your Fitbit Charge HR running smoothly
Keep your Fitbit Charge HR charged above 20 percent battery whenever possible. Devices that run very low on battery are more likely to freeze or behave unpredictably. Charge it fully at least once a week, even if you do not use it heavily.
Update the Fitbit app on your phone whenever a new version is available. Open the app store on your phone (Google Play for Android, App Store for iPhone), search for Fitbit, and install any pending updates. Outdated app versions sometimes cause connection problems that make the device appear frozen or unresponsive.
Keep your phone and Fitbit within 30 feet of each other during the day so they stay synced. If the device loses connection for extended periods, it may become sluggish or unresponsive when you try to use it. A soft reset after reconnecting usually restores normal performance.
When to consider replacing your Fitbit Charge HR
The Fitbit Charge HR was released in 2015 and Fitbit ended support for it in 2017. If your device is freezing frequently even after soft resets, or if the screen is cracked or the band is falling apart, replacement may be more practical than continued troubleshooting. Fitbit no longer releases updates for this model, so recurring software issues will not be fixed by the company.
If you decide to replace it, a soft reset followed by a factory reset will prepare the device for someone else to use, or you can recycle it through an electronics recycling program. Check Earth911.com or call your local waste management office to find a recycler near you.
Frequently Asked Questions
Will a soft reset erase my activity data?
No. A soft reset only clears temporary memory and restarts the device. Your activity history, personal settings, and all data stored on the device remain intact. Data synced to the Fitbit app on your phone is completely separate and is never affected by a soft reset.
How long does a soft reset take?
The reset itself takes 10 to 15 seconds of holding the button. The device then takes another 5 to 10 seconds to restart and show the home screen. The entire process is usually done within 30 seconds.
What if the button on the back is stuck or broken?
If the button will not press or feels stuck, try gently cleaning around it with a dry cloth to remove any debris. If it still will not work, the device may need hardware repair. Contact Fitbit support to discuss repair or replacement options, though the Charge HR is no longer under manufacturer support.
Can I soft reset my Fitbit Charge HR while it is charging?
Yes, you can perform a soft reset while the device is plugged into the USB cable. It will not harm the device or interrupt the charge. Some people find it easier to see the screen while the device is on the charger.
Why does my Fitbit Charge HR keep freezing even after a soft reset?
Repeated freezing after a soft reset usually points to a connection issue between the device and your phone. Try unpairing and repairing the device through the Fitbit app. If freezing continues, the device may have a hardware problem, especially if it is several years old. Consider whether replacement would be more cost-effective than continued troubleshooting.