Reprogram Your Fitbit Charge 2 by Resetting It to Factory Settings
To reprogram your Fitbit Charge 2, you need to perform a factory reset, which clears all your personal data and settings and returns the device to its original state. This is the only way to fully reprogram the device—there is no partial reset option. A factory reset takes about one minute and requires only your Fitbit Charge 2 and a computer or smartphone with the Fitbit app installed.
The reset process itself is straightforward: you hold down the button on your Charge 2 for about 10 to 12 seconds until you see a smiley face icon appear on the screen, then release. The device will vibrate and restart. After the restart, your Charge 2 will be blank and ready to set up again from the beginning, just as it was when new.
Key Takeaways
- A factory reset clears all data and settings from your Charge 2 and takes about one minute to complete.
- Hold the button on the side of your device for 10 to 12 seconds until a smiley face appears, then release.
- After reset, you must set up your Charge 2 again using the Fitbit app on your phone or computer.
- Your Fitbit account and cloud data remain safe—only the device itself is wiped.
- A factory reset solves most software problems like freezing, unresponsive screens, or syncing failures.
Step-by-Step Reset Instructions
Before you begin, make sure your Charge 2 has at least 50 percent battery remaining. A reset on a low battery may not complete properly. If the battery is low, plug the device into its charging cable and wait 30 minutes.
Locate the button on the left side of your Charge 2 (the side facing your wrist when you wear it). Press and hold this button firmly. Do not release it. Count slowly to 10, then continue holding for another 2 to 3 seconds. You should see a smiley face icon appear on the screen—this is your signal that the reset has started. Release the button when ready when you see the smiley face.
Your device will vibrate once or twice and the screen will go blank. The Charge 2 will restart automatically. This restart takes about 30 seconds. You will see the Fitbit logo appear, then a series of setup screens. Do not interrupt this process—let the device complete its restart fully before touching it again.
Setting Up Your Charge 2 After Reset
Once your Charge 2 has restarted, you will see the initial setup screens on the device itself. These screens will ask you to confirm your language and time zone. Use the button to navigate through these screens and select your preferences. This on-device setup takes about two minutes.
After the on-device setup is complete, open the Fitbit app on your phone or computer and sign in with your Fitbit account. The app will detect your Charge 2 and ask you to pair it. Follow the pairing prompts in the app. Pairing usually takes one to two minutes. Once pairing is complete, your Charge 2 will sync with your account, and your historical data (steps, heart rate, sleep records) will reappear on the device.
Your personal settings—like your daily step goal, heart rate zones, and notification preferences—will not automatically return. You will need to set these again in the Fitbit app. Go to the device settings in the app and enter your preferences one more time. This takes about five minutes depending on how many settings you customize.
When to Reset Your Charge 2
A factory reset is the right choice when your Charge 2 is not responding to button presses, the screen is frozen, or the device will not sync with the app even after closing and reopening the app. It is also useful if you are transferring the device to another person and want to remove all your personal information first.
Do not reset your device straightforward because you want to clear your step count or activity history. A reset is unnecessary for that purpose—you can delete individual activities or reset your daily stats directly in the Fitbit app without wiping the entire device. Resetting should be your last step after trying simpler fixes like restarting the app or charging the device fully.
What Happens to Your Data During a Reset
A factory reset only erases data stored on the physical device itself. Your Fitbit account and all historical data stored in the cloud remain completely intact. When you pair your Charge 2 again after the reset, all your past activity, sleep records, and weight logs will sync back to the device from your account.
Personal settings like your daily goals, notification preferences, and custom watch faces are stored on the device and will be erased. You will need to reconfigure these in the Fitbit app after pairing. Your password and account information are never affected by a device reset—you will still log in with the same credentials you used before.
Troubleshooting a Reset That Does Not Work
If you hold the button for 12 seconds and do not see a smiley face, the battery may be too low. Charge your device for at least one hour and try again. If the screen is completely unresponsive, try charging for two hours before attempting the reset.
If the smiley face appears but the device does not restart, release the button and wait 30 seconds, then try the reset again. Sometimes the first attempt does not register. If after three attempts the device still will not reset, try disconnecting it from the Fitbit app. Open the Fitbit app, go to your device settings, and select "Forget This Device," then attempt the reset again.
If your Charge 2 still will not respond after these steps, the device may have a hardware problem. Contact Fitbit support through their website with your device serial number (found in the app under device settings) and describe what you have already tried. Fitbit support can advise whether your device is still under warranty.
Frequently Asked Questions
Will I lose my step count and activity history if I reset?
No. Your step count, activity history, and all other data stored in your Fitbit account will remain in the cloud. When you pair your Charge 2 again after the reset, this data will sync back to your device. Only the settings stored on the device itself—like your daily goals and notification preferences—will be erased.
How long does a factory reset take?
The button-hold itself takes about 10 to 12 seconds. The device restart takes another 30 seconds. The on-device setup screens take about two minutes. Pairing with the app takes one to two minutes. Total time from start to finish is about five minutes.
Can I reset my Charge 2 without the Fitbit app?
Yes, you can perform the factory reset using only the device button. However, you will need the Fitbit app on a phone or computer to pair the device again after the reset and to restore your personal settings. The app is free and available for iOS, Android, Windows, and Mac.
What if I forget my Fitbit password after resetting?
Go to the Fitbit login page on your computer or phone and select "Forgot your password?" Enter your email address and Fitbit will send you a password reset link. You can then create a new password and use it to sign in to the app and pair your Charge 2.
Do I need to reset my Charge 2 if I am selling it to someone else?
Yes, a factory reset is the best way to remove all your personal data before transferring the device. After the reset, the new owner can set it up with their own Fitbit account. This ensures your activity data, personal settings, and account information are completely removed from the device.