A factory reset clears all data and returns your Fitbit Charge HR to its original state
A factory reset on your Fitbit Charge HR erases all your stored activity data, heart rate logs, and personal settings, then restores the device to how it came from the factory. You would do this if the device is frozen, not syncing with your phone, or behaving erratically. The reset itself takes about a minute and requires only your device—no computer or app needed.
The Fitbit Charge HR has a physical reset button on the back of the band. Pressing and holding it for several seconds triggers the reset sequence. Once complete, you will see the Fitbit logo appear on the screen, and the device will be ready to pair with your phone again as if it were brand new.
Key Takeaways
- A factory reset erases all your activity history and personal settings from the Fitbit Charge HR, so back up any data you want to keep before starting.
- The reset button is located on the back of the band where it connects to the main device body.
- Hold the button for 10 to 15 seconds until you see the Fitbit logo flash on the screen, then release.
- After the reset completes, you will need to re-pair the device with the Fitbit app on your phone to use it again.
Locating and pressing the reset button
Turn your Fitbit Charge HR over so you can see the back of the band. Near the bottom where the band connects to the main tracker body, you will find a small circular button recessed slightly into the plastic. This is the reset button. You may need to use a fingernail or a small tool like a straightened paperclip to reach it comfortably, since it sits flush with the surface.
Press and hold that button steadily. Do not release after one or two seconds—you need to keep pressure on it for 10 to 15 seconds. During this time, the screen will go blank or dim. Keep holding until you see the Fitbit logo appear on the display, which signals that the reset has begun.
What happens during and after the reset
Once the Fitbit logo appears, the device is resetting itself. This process takes only a few seconds. You will see the logo disappear, and the screen may go dark again. The device is now in its factory state with no personal data stored on it.
When the reset is complete, the screen will light up and show you the pairing screen—usually a series of dots or a prompt to connect to the Fitbit app. At this point, the reset is finished. Your Fitbit Charge HR is ready to be set up again from scratch, just as it would be if you had just unboxed it.
Re-pairing your device after the reset
Open the Fitbit app on your phone and tap the plus icon or "Set Up Device" button, depending on which version of the app you have. Select "Fitbit Charge HR" from the list of available devices. The app will search for your tracker and display it when it finds it.
Tap on your device in the app to begin pairing. Follow the on-screen prompts to enter your personal information, set your goals, and configure any preferences you want. Once pairing is complete, your Fitbit Charge HR will sync with your phone and begin tracking your activity again.
When a reset does not solve the problem
If your Fitbit Charge HR still does not respond after a factory reset, or if it freezes during the reset process, the device may have a hardware fault. Try the reset one more time, making sure you hold the button for the full 10 to 15 seconds without interruption.
If the problem persists, contact Fitbit support through their website. They can advise you on whether the device is still under warranty and what repair or replacement options are available. Do not attempt to open the device or replace the battery yourself, as this will void any remaining warranty.
Backing up your data before you reset
The Fitbit app automatically stores your activity history on Fitbit's servers, so your step counts, heart rate data, and other metrics are not lost when you reset the device itself. However, any custom settings, alarms, or personal preferences you configured will be erased.
Before you reset, open the Fitbit app and take screenshots of any settings you want to remember—such as your daily step goal, heart rate zones, or alarm times. This way you can quickly reconfigure them after the reset is complete without having to guess at what you had set.
Frequently Asked Questions
Will I lose all my activity data if I reset my Fitbit Charge HR?
Your activity history is stored in the Fitbit app on your phone and on Fitbit's servers, not on the device itself. A factory reset erases only the settings stored on the tracker, not your historical data. When you re-pair the device, your activity history will still be there in the app.
How long does a factory reset take?
The reset process itself takes only a few seconds once you see the Fitbit logo appear. Holding the button until the logo shows up takes about 10 to 15 seconds. The entire process from start to finish is usually under one minute.
What if the reset button does not seem to work?
Make sure you are pressing the correct button on the back of the band, not the side. The button is small and recessed, so you may need a fingernail or thin tool to reach it. Press firmly and hold for the full 10 to 15 seconds without releasing early. If nothing happens after multiple attempts, the button may be stuck or damaged.
Do I need a computer to reset my Fitbit Charge HR?
No. The reset is done entirely on the device using the physical button on the back. You do not need to connect it to a computer or use any special software. You will only need your phone and the Fitbit app to re-pair it after the reset is complete.
Can I undo a factory reset?
No, a factory reset cannot be undone. Once you press the button and the Fitbit logo appears, the reset is permanent. Your activity history is safe because it is stored in the app, but any device settings will be gone. If you are unsure whether you want to reset, contact Fitbit support first to explore other troubleshooting options.