A factory reset clears all data and returns your device to its original state
A factory reset on your Fitbit Inspire 3 erases all your personal data—workouts, heart rate history, sleep records, and settings—and restores the device to how it came from the factory. You would reset if the device is frozen, not syncing with your phone, acting sluggish, or if you're selling or giving it away. The process takes about one minute and requires only your device and a USB charger.
Before you reset, understand that this action cannot be undone. All data stored on the device itself will be gone. If your data has synced to the Fitbit app on your phone, that information remains in your account and will reappear once you set up the device again—but anything that never synced is lost permanently.
Key Takeaways
- A factory reset erases all data on the device itself, though synced data in your Fitbit app account is preserved.
- You can reset your Inspire 3 using only the device and its charging cable—no app or computer required.
- The reset process takes about one minute and the device will restart automatically when finished.
- After reset, you will need to set up the device again in the Fitbit app before it can track or sync.
- A reset fixes most freezing, syncing, or performance problems without needing to contact support.
Steps to reset your Inspire 3 using the device buttons
The simplest way to reset is using the buttons on the device itself. You do not need a computer or the app. Start by locating the two buttons on the back of your Inspire 3—one near the top and one near the bottom of the band.
Press and hold both buttons at the same time for about three seconds. You will see the Fitbit logo appear on the screen, followed by a progress bar. Keep holding the buttons until the progress bar completes and the device vibrates. This usually takes 10 to 15 seconds total. Once the vibration stops, release the buttons. The device will restart and show the Fitbit logo again, then display a setup screen. Your Inspire 3 is now reset.
Steps to reset your Inspire 3 using the Fitbit app
If the buttons are not responding or you prefer to reset through the app, you can do it from your phone. Open the Fitbit app and tap your profile icon in the top left corner. Scroll down and select your Inspire 3 device from the list of connected devices.
Tap the gear icon to open device settings. Scroll to the bottom and look for "Clear Device" or "Factory Reset"—the exact wording varies by app version. Tap it and confirm when the app asks you to verify. The app will send a reset command to your device. Your Inspire 3 will vibrate and restart within a few seconds. Once it finishes, the device is reset and ready to set up again.
What to do after the reset is complete
After your device restarts, it will display a setup screen. At this point, your Inspire 3 is not yet connected to your account. Open the Fitbit app on your phone and tap the plus icon to add a device. Select Inspire 3 from the list of available devices.
Follow the on-screen prompts to pair the device with your phone. The app will ask you to confirm your personal information and preferences. Once pairing is complete, your device will begin syncing. If you had data in your Fitbit account before the reset, that information will reappear in the app—your account data was never erased, only the data stored on the device itself.
Common mistakes that prevent a successful reset
The most common error is not holding both buttons long enough. Many people release after two or three seconds, which does not trigger the reset. Hold for the full 10 to 15 seconds and wait for the vibration before letting go.
Another mistake is attempting a reset while the device is charging. Disconnect your Inspire 3 from the charger before you start. If the device is completely out of battery, charge it for at least 15 minutes before attempting a reset—a device with almost no power may not complete the process.
Some people also confuse a reset with straightforward restarting the device. Restarting (which happens if you hold one button for a few seconds) does not erase data. Only the two-button hold erases everything.
When a reset does not fix the problem
If your device is still frozen, not syncing, or behaving oddly after a reset and full setup, try these steps before assuming the hardware is broken. First, restart your phone and reopen the Fitbit app. Sometimes the app itself gets stuck and a phone restart clears it.
Second, check that your Inspire 3 has the latest firmware. Open the Fitbit app, go to your device settings, and look for a firmware or software update option. If an update is available, install it while the device is plugged in and near your phone.
Third, try unpairing and re-pairing the device without resetting it. In the Fitbit app, go to device settings and select "Unpair Device." Then add it again as a new device. This often fixes syncing problems without erasing your data.
Preparing your Inspire 3 before selling or giving it away
If you are selling or giving your device to someone else, a factory reset is essential. It removes all your personal data—your name, weight, age, and all historical activity. After you reset, do not set it up again. Leave it on the setup screen so the new owner can pair it with their own account.
Before you reset, make sure any data you want to keep has synced to your Fitbit account. Open the Fitbit app and check that your recent workouts and stats appear there. Once you confirm the sync, you can safely reset the device knowing your data is preserved in your account.
Frequently Asked Questions
Will I lose all my workout history if I reset?
Data that synced to the Fitbit app before the reset stays in your account and will reappear once you set up the device again. Only data that was never synced to the app is lost. To be safe, open the Fitbit app and check that your recent activity appears there before you reset.
Can I reset my Inspire 3 if it is completely frozen?
Yes. Even if the screen is unresponsive, pressing and holding both buttons should still trigger a reset. If the device is completely dead, charge it for at least 15 minutes first, then try the reset. If it remains unresponsive after charging, the hardware may need service.
How long does it take to reset and set up again?
The reset itself takes about one minute. Setting up the device again in the Fitbit app takes another five to ten minutes, depending on how many preferences you customize. Syncing your account data back to the device can take a few minutes more.
Do I need a computer to reset my Inspire 3?
No. You can reset using only the device buttons or the Fitbit app on your phone. A computer is not required for any part of the process.
What if the reset button method does not work?
Try the app-based reset instead. Open the Fitbit app, go to device settings, and select the factory reset option. If neither method works and your device remains frozen or unresponsive, the hardware may be damaged and you may need to contact Fitbit support or consider a replacement.