What a reset does and when you need one
A reset clears all data from your Charge 2 and returns it to factory settings. This wipes your activity history, heart rate records, and any custom settings you've saved on the device itself. You'll need to reconnect it to the Fitbit app afterward, but your cloud data—the information stored on Fitbit's servers—stays intact and will sync back once you reconnect.
Reset your Charge 2 when the screen freezes, the device won't sync with your phone, the battery won't charge, or the tracker stops responding to button presses. A reset also solves most pairing problems if you're switching to a new phone or giving the device to someone else.
Key Takeaways
- A factory reset erases all data stored on the Charge 2 itself, but your activity history remains safe in the Fitbit app and cloud account.
- The reset process takes about 10 to 15 seconds and requires only the device—no phone or computer needed.
- After resetting, you must reconnect the Charge 2 to the Fitbit app using the same account or a new one before it will track again.
- If your Charge 2 won't turn on or respond to button presses, try charging it for at least 30 minutes before attempting a reset.
How to perform a factory reset
Hold down the button on the left side of your Charge 2 for 3 to 4 seconds. You'll see the Fitbit logo appear on the screen. Keep holding the button until you see a second screen with a smiley face and a frown face, with arrows pointing left and right. This takes about 10 to 15 seconds total.
Once the smiley and frown appear, press the button on the right side of the device to select the frown face. The screen will show a confirmation message. Press the right button again to confirm the reset. The device will power off, and the reset is complete. This entire process takes less than a minute.
Reconnecting after the reset
After the reset, your Charge 2 will be blank and won't track until you pair it again. Open the Fitbit app on your phone and tap the profile icon in the bottom right corner. Select "Set Up a Device" and choose Charge 2 from the list.
The app will search for your device and ask you to confirm the pairing. Once confirmed, your Charge 2 will sync with your account. If you're using the same Fitbit account, your historical data will reappear in the app within a few minutes. If you're setting up a new account, you'll start with a blank slate, but the old data remains in your previous account if you log back in later.
Troubleshooting a reset that doesn't work
If the smiley and frown screen never appears, your battery may be too low. Plug the Charge 2 into a USB charger for at least 30 minutes, then try the reset again. A completely drained battery can prevent the device from responding to button presses.
If the device still won't respond after charging, try a force restart instead. Hold the button for 10 to 15 seconds without releasing—longer than the normal reset. You may see the Fitbit logo flash multiple times. This can wake up a frozen device that won't respond to normal commands.
If neither method works and the screen remains completely black or unresponsive, the device may have a hardware fault. Contact Fitbit support with your device serial number (found on the back of the tracker) for further guidance.
What happens to your data after a reset
All activity data, heart rate history, and sleep records stored on the Charge 2 itself are permanently deleted during a reset. However, any data that synced to the Fitbit app before the reset remains in your account. When you reconnect the device, that historical data is still there—you won't lose your step counts or workout history from the past weeks or months.
Custom settings like your goal steps, alarm times, or display preferences are also erased and reset to defaults. You'll need to reconfigure these in the Fitbit app after reconnecting. The device will use the default 10,000 steps per day goal until you change it.
Resetting before selling or giving away your Charge 2
Always perform a factory reset before handing your Charge 2 to someone else or selling it. This removes your personal data and account information from the device. After the reset, the new owner can set up their own Fitbit account and pair the device to their phone.
If you're concerned about privacy, you can also remove the device from your Fitbit account through the app before resetting. Open your profile, find the Charge 2 in your device list, and select "Remove This Device." This disconnects it from your account when ready. Then perform the factory reset on the device itself.
Frequently Asked Questions
Will I lose my step count and activity history if I reset?
No. Data that synced to the Fitbit app before the reset stays in your account. Only information stored directly on the device is erased. When you reconnect, your historical data reappears in the app.
How long does it take to reset a Charge 2?
The reset process itself takes 10 to 15 seconds. Reconnecting to the app afterward takes another 2 to 5 minutes. Your data will sync back within a few minutes after pairing.
Can I reset my Charge 2 without the Fitbit app?
Yes. The reset happens entirely on the device using the buttons. You don't need your phone or the app to perform the reset. However, you will need the app to reconnect and resume tracking after the reset is complete.
What if my Charge 2 is frozen and won't respond to button presses?
Charge the device for at least 30 minutes first. If it still won't respond, try holding the button for 10 to 15 seconds for a force restart. This can wake up a frozen device before you attempt a normal reset.
Do I need to reset my Charge 2 before pairing it with a new phone?
No. You can straightforward open the Fitbit app on your new phone and sign into your existing account. The app will find and reconnect to your Charge 2 automatically. A reset is only necessary if the device won't pair or sync.