Reset your Charge HR by holding the button for 10 to 15 seconds

The Charge HR resets by pressing and holding the single button on the left side of the band for 10 to 15 seconds. You will see the Fitbit logo appear on the screen, then the device will vibrate. Release the button after the vibration. The tracker will restart and return to the clock face within a few seconds.

This is a soft reset — it clears temporary glitches without erasing your data, account connection, or stored activity history. Use this method first if the screen is frozen, the device is not responding to taps, or syncing has stalled.

If a soft reset does not fix the problem, you may need a factory reset, which erases everything on the device and returns it to its original state. A factory reset is the last step before contacting Fitbit support.

Key Takeaways

  • Hold the button on the left side of the Charge HR for 10 to 15 seconds until you see the Fitbit logo and feel a vibration.
  • A soft reset fixes frozen screens and unresponsive touch without erasing your data or account pairing.
  • A factory reset erases all data on the device and requires you to set it up again from scratch.
  • Charge the device to at least 50 percent battery before attempting either type of reset.
  • If the device still does not respond after a reset, the hardware may be damaged and the device may need replacement.

When to use a soft reset versus a factory reset

A soft reset is the right choice for everyday problems: the screen freezes mid-workout, the device stops responding to taps, or it will not sync with your phone even though Bluetooth is on. Soft resets take about 30 seconds and preserve all your data, your Fitbit account pairing, and your activity history. You do not need to set anything up again.

A factory reset erases the device completely and returns it to the state it was in when it left the factory. Use a factory reset only if a soft reset did not work, or if you are selling or giving away the device and want to remove your personal data. After a factory reset, you will need to pair the device to your Fitbit account again and set your personal information (height, weight, age, gender) from scratch.

Before you reset, make sure the Charge HR is charged to at least 50 percent. A reset on a nearly dead battery can fail partway through and leave the device in an unusable state.

How to perform a factory reset on the Charge HR

To factory reset the Charge HR, hold the button for 10 to 15 seconds as you would for a soft reset. When the Fitbit logo appears and the device vibrates, continue holding the button for another 5 to 10 seconds without releasing. You will see a second vibration and the screen will go blank or show a progress bar.

The factory reset takes about one minute. Do not remove the device from your wrist or interrupt the process. Once the reset is complete, the device will show the Fitbit logo again and then return to the clock face. The device is now in its original state with no account pairing and no stored data.

After a factory reset, open the Fitbit app on your phone and select "Set up a device." Choose Charge HR from the list and follow the pairing steps. You will need to enter your personal information again, including your height, weight, age, and gender, so the device can calculate calories and distance accurately.

Troubleshooting when the button does not respond

If the button does not respond when you press it, the device may have a hardware problem or the button itself may be stuck. Try pressing the button firmly and deliberately rather than tapping it lightly. The Charge HR button requires a solid press to register.

If the button still does not respond, try charging the device for at least 30 minutes. A device with very low battery sometimes becomes unresponsive even if it shows a charging symbol. Once it has charged, attempt the reset again.

If the device still will not respond after charging and multiple button presses, the button mechanism may be damaged. At that point, a reset is not possible, and the device may need to be replaced. Contact Fitbit support with the device serial number (found in the Fitbit app under device settings) to discuss replacement options.

What happens to your data after a soft reset

A soft reset does not erase any data. Your step count, heart rate history, sleep records, and all other activity data stored on the device remain intact. Your Fitbit account pairing also stays in place, so the device will continue to sync with your phone and your Fitbit account without any additional setup.

The only thing a soft reset clears is temporary memory — the data the device is actively using to run its current functions. This is why a soft reset fixes freezes and unresponsive screens without affecting your history. Think of it like restarting a computer: the files stay on the hard drive, but the program that was frozen closes and reopens fresh.

Syncing after a reset

After a soft reset, the Charge HR will sync automatically the next time it comes within Bluetooth range of your phone and the Fitbit app is open. You do not need to do anything — just wear the device as usual. Syncing typically takes 30 seconds to two minutes.

If the device does not sync within an hour of the reset, open the Fitbit app, go to the device settings, and tap "Sync Now." If syncing still fails, try turning Bluetooth off and back on, then opening the Fitbit app again.

After a factory reset, the device will not sync until you have paired it to your account again. Follow the pairing steps in the Fitbit app, and syncing will begin automatically once pairing is complete.

Preventing the need for a reset

Keep the Charge HR charged above 20 percent battery. A device that runs too low on power can become unresponsive and may require a reset to recover. Charge it at least two or three times a week, or more often if you use the heart rate monitor continuously.

Restart the Fitbit app on your phone once a week if you notice syncing is slow or the app is sluggish. Close the app completely (not just minimize it), wait 10 seconds, and open it again. This clears temporary memory in the app without affecting your data.

Keep the device firmware up to date. The Fitbit app will notify you when an update is available. Updates are installed automatically when the device syncs, so you do not need to do anything manually. Outdated firmware can cause glitches that a reset will fix, but staying current prevents many of those glitches from happening in the first place.

Frequently Asked Questions

Will a soft reset erase my step count or activity history?

No. A soft reset only restarts the device's active functions. All your step count, heart rate data, sleep records, and activity history remain on the device and in your Fitbit account. You will see all your data exactly as it was before the reset.

How long does a factory reset take?

A factory reset takes about one minute from the time you hold the button until the device returns to the clock face. Do not interrupt the process or remove the device during this time. Once it is complete, you will need to pair it to your account again, which takes another two to five minutes.

Can I reset the Charge HR if the screen is completely black?

If the screen is black and the device does not respond to button presses, charge it for at least 30 minutes first. A completely drained battery can make the device appear broken. Once it has charged, try the reset. If the screen is still black after charging, the device may have a hardware failure.

Do I need to unpair the device before a factory reset?

No. A factory reset automatically removes the device pairing as part of the process. You do not need to unpair it in the Fitbit app first. After the reset is complete, you can pair it again as if it were a brand-new device.

What if the device still does not work after I reset it?

If a soft reset does not fix the problem, try a factory reset. If the device still does not respond or function normally after a factory reset, the hardware may be damaged. Contact Fitbit support with your device serial number and a description of the problem to discuss repair or replacement options.