A factory reset clears all data and returns your Fitbit 2 to its original state

A factory reset on your Fitbit 2 wipes the device clean — it removes all your activity data, settings, and any synced information stored on the tracker itself. This is different from unpairing, which disconnects the device from your phone app but leaves data on the tracker. You would reset your Fitbit 2 if you're troubleshooting a serious problem, preparing to sell or give away the device, or starting completely fresh after a long period of not wearing it.

The reset process takes about a minute and requires only the device itself. Your historical data stored in the Fitbit app on your phone will remain there — the reset only affects what's on the tracker. After reset, you'll need to pair the device to your phone again before it can sync new activity.

Key Takeaways

  • A factory reset removes all data from the Fitbit 2 device itself, but your historical data in the Fitbit app on your phone stays intact.
  • The reset button is a small indentation on the back of the device, and you press it for 10 to 15 seconds until the screen goes blank.
  • After the reset completes, you must pair the device to your phone again using the Fitbit app before it will sync activity.
  • A reset is different from unpairing — unpairing keeps data on the tracker, while a reset erases everything on the device.

Locate the reset button on the back of your Fitbit 2

The reset button is a small, recessed indentation on the back of your Fitbit 2, near the bottom edge. It's not a raised button you can press with your finger — it's a tiny hole that requires a tool to set up. You'll need a straightened paperclip, a ballpoint pen (the tip works well), or a similar small, pointed object.

Hold the device in your hand with the screen facing you and the band pointing away. Look at the back of the device near where the band connects. You should see a small circular indent — that's your reset button. If you're having trouble spotting it, try looking under a bright light or using a magnifying glass.

Press and hold the reset button for 10 to 15 seconds

Insert the tip of your tool into the reset button hole and press gently but firmly. You don't need to push hard — just enough pressure to feel the button depress slightly. Hold it down and watch the screen. After about 10 to 15 seconds, the screen will go blank or display a loading animation.

Keep holding the button even after the screen changes. The device is erasing its memory, and releasing too early can interrupt the process. You'll know the reset is complete when the Fitbit logo appears on the screen and the device vibrates or shows a confirmation message. This usually takes 30 to 60 seconds total from the moment you first press the button.

Wait for the device to restart and show the pairing screen

Once the reset finishes, your Fitbit 2 will restart automatically. The screen will show the Fitbit logo, and then you'll see a pairing screen or a message asking you to set up the device. This is normal — the device is now in the same state it was when it left the factory.

Do not press any buttons or try to interact with the device during this restart. Let it complete the process on its own. If the screen stays blank for more than two minutes, try pressing the reset button again, as the first attempt may not have registered.

Pair the reset Fitbit 2 to your phone using the Fitbit app

Open the Fitbit app on your phone and tap the plus icon or "Set Up Device" button (the exact wording depends on your app version). Select Fitbit 2 from the list of available devices. The app will search for your device and display it once it finds it. Tap your device name to begin pairing.

Follow the on-screen prompts in the app. You'll be asked to confirm your personal information, set your goals, and choose your preferences for notifications and reminders. The app will sync with your device, and once pairing is complete, your Fitbit 2 will begin tracking activity again. Your historical data from before the reset will still be visible in the app — it was never removed.

Troubleshooting if the reset doesn't work

If the screen doesn't respond after holding the reset button for 15 seconds, try these steps: first, make sure your tool is actually reaching the button — sometimes the hole is deeper than it appears. Press a bit harder, but not so hard that you risk damaging the device. Second, try holding the button for a full 30 seconds instead of 15, as some devices take longer to respond.

If the device still won't reset, charge it fully and wait 30 minutes, then try again. A low battery can sometimes prevent a reset from completing. If you've tried multiple times and the device remains unresponsive, the tracker may have a hardware problem, and you may need to contact Fitbit support or consider replacing the device.

What happens to your data after a reset

Your activity history, step counts, heart rate data, and sleep logs stored in the Fitbit app on your phone are not affected by a device reset. The reset only clears the small amount of data stored on the tracker itself — typically the last few days of activity and your personal settings like time zone and display preferences.

Once you pair the reset device to your phone again, it will begin syncing new activity data to the app when ready. You won't lose any historical information. If you were concerned about privacy before selling or giving away the device, a factory reset ensures that no personal data remains on the physical tracker.

Frequently Asked Questions

Will I lose all my activity history if I reset my Fitbit 2?

No. Your activity history stored in the Fitbit app on your phone remains intact. The reset only clears data on the device itself. Once you pair the reset tracker to your phone again, you'll see all your previous data in the app.

What's the difference between resetting and unpairing my Fitbit 2?

Unpairing disconnects the device from your phone app but leaves all data on the tracker. A reset erases everything on the device and returns it to factory settings. Unpairing is useful if you're switching phones; a reset is for troubleshooting or preparing the device for a new owner.

Do I need to charge my Fitbit 2 before I reset it?

It's a good idea to charge it to at least 50 percent battery before attempting a reset. A low battery can prevent the reset from completing properly. If your device won't reset, charge it fully and wait 30 minutes before trying again.

Can I reset my Fitbit 2 without the Fitbit app?

Yes, the reset itself requires only the device and a small tool — you don't need the app for that step. However, you will need the Fitbit app on your phone to pair the device after the reset so it can sync activity data.

How long does a factory reset take?

The entire process, from pressing the reset button to seeing the pairing screen, usually takes 30 to 60 seconds. After that, pairing the device to your phone through the app takes another two to five minutes depending on your phone's speed and internet connection.