A factory reset clears all data and returns your Fitbit Charge to its original state

A factory reset wipes your Fitbit Charge completely — removing all your activity history, settings, and personal data — and returns the device to how it was when it left the factory. You would do this if the device is frozen, acting erratically, or if you are selling or giving it away. The process takes a few minutes and works the same way across all Fitbit Charge models (Charge 3, Charge 4, Charge 5, and Charge 6).

Before you reset, understand that this action cannot be undone. All your stored workouts, sleep records, and custom settings disappear. If you want to keep your data, sync your Fitbit to the Fitbit app on your phone first — the app stores a backup of your information in the cloud, and you can restore it to the device later.

Key Takeaways

  • A factory reset erases all data on your Fitbit Charge and returns it to original settings, and this action cannot be reversed.
  • Syncing to the Fitbit app before resetting backs up your activity history and settings to the cloud so you can restore them afterward.
  • The reset process involves holding down the button on the left side of the device for 10 to 12 seconds until you see a confirmation screen.
  • After resetting, you will need to set up the device again in the Fitbit app, including pairing it to your phone and entering your personal information.

How to perform a factory reset on your Fitbit Charge

The reset process is the same across all Fitbit Charge generations. Make sure your device has at least 50 percent battery before you start, because a reset can fail if the battery dies mid-process.

On your Fitbit Charge, locate the button on the left side of the device (the side facing your wrist when you wear it). Press and hold this button for 10 to 12 seconds without releasing. You will see the Fitbit logo appear on the screen, followed by a series of messages. Keep holding until you see a screen that says "Clear user data" or a similar confirmation message. Release the button. The device will then display a progress bar as it erases all information. This usually takes 30 seconds to two minutes. When the screen goes blank or shows the Fitbit logo again, the reset is complete.

Do not remove the device from your wrist or interrupt the process while the progress bar is running. If the reset fails and the device does not respond, try charging it fully and repeating the process.

Back up your data before resetting

The Fitbit app stores your activity history, workout records, and personal settings on Fitbit's servers. If you sync your device to the app before resetting, that data remains in your account and you can restore it to a new or reset device later.

Open the Fitbit app on your phone and make sure your Fitbit Charge is connected and synced. Look for a sync button (usually a circular arrow icon) and tap it to force a manual sync. Wait for the sync to complete — you will see a confirmation message. Once syncing is done, your data is backed up and safe. You can now reset the device without losing your information.

After the reset, when you set up the device again in the Fitbit app, you will have the option to restore your previous data. The app will ask whether you want to set up as a new device or restore from a backup. Choose restore, and your activity history and settings will return to the device.

Set up your Fitbit Charge after resetting

Once the reset is complete, your Fitbit Charge will be blank and will not connect to your phone automatically. You need to set it up again using the Fitbit app.

Open the Fitbit app and tap the plus icon (usually in the top right corner) to add a new device. Select "Fitbit Charge" and choose your specific model (Charge 3, 4, 5, or 6). Follow the on-screen instructions to pair the device to your phone via Bluetooth. The app will ask you to enter your personal information — height, weight, age, and gender — which the device uses to calculate calories burned and other metrics. If you backed up your data before resetting, the app will ask whether you want to restore it. Select yes, and your previous activity history and settings will sync back to the device.

The setup process usually takes five to ten minutes. Once complete, your Fitbit Charge will work normally and begin tracking your activity again.

When a reset does not fix the problem

If your Fitbit Charge is frozen, unresponsive, or crashing even after a factory reset, the issue may be a hardware problem rather than a software one. Try charging the device for at least two hours, then attempt the reset again. If the device still does not respond, try a hard reset instead: hold the button for 15 to 20 seconds (longer than a normal reset) and watch for the Fitbit logo to appear and disappear twice. Release the button after the second disappearance.

If the device remains unresponsive after both a factory reset and a hard reset, contact Fitbit support through the Fitbit app (tap your profile icon, then Help and Support) or visit the Fitbit website. Fitbit offers a warranty on most Charge models, and if the device is within the warranty period, you may be able to get a replacement.

Troubleshooting reset issues

If the reset starts but does not complete, the most common cause is low battery. Charge your Fitbit Charge to at least 50 percent and try again. If the device is completely unresponsive and will not charge, try connecting it to a different USB cable or charger — the original cable may be faulty.

If you see an error message during reset, write down the exact text and search for it in the Fitbit support documentation or community forums. Some error messages point to specific problems (like a corrupted file) that may require a different solution than a standard reset.

If the reset completes but the device will not pair to the app afterward, restart your phone and try pairing again. Make sure Bluetooth is turned on and that you are not trying to pair to multiple phones at once — Fitbit Charge devices can only connect to one phone at a time.

Preparing your Fitbit Charge for sale or transfer

If you are selling or giving away your Fitbit Charge, a factory reset is essential. It removes all your personal data — including your activity history, heart rate records, and any payment information if the device supports contactless payments. After resetting, the new owner can set up the device with their own account.

Before you reset, back up your data to the Fitbit app so you can transfer it to a new device if you are upgrading. Then perform the factory reset as described above. Once the reset is complete, the device is ready for the next person to use. Do not include your Fitbit account information or passwords with the device.

Frequently Asked Questions

Will a factory reset remove my Fitbit account?

No. A factory reset only clears data from the device itself. Your Fitbit account remains active, and your backed-up data stays in the cloud. You can sign into your account on a new device and restore your information anytime.

How long does a factory reset take?

The reset process itself takes 30 seconds to two minutes. The button-holding part takes about 10 to 12 seconds. Setup afterward in the Fitbit app takes five to ten minutes.

Can I stop a reset once it has started?

Once you see the progress bar on the screen, do not interrupt it. If you release the button before the progress bar appears, the reset will not start. If the progress bar is running and you stop it, the reset may fail and leave the device in an unstable state.

What if I forgot to back up my data before resetting?

If you did not sync before resetting, the data on the device is lost. However, if you synced at any point in the past, some older data may still exist in your Fitbit account. Sign into your account on the Fitbit website to check your activity history.

Do I need to unpair my Fitbit before resetting?

You do not have to unpair it first, but it is a good idea. In the Fitbit app, go to your device settings and select "Unpair Device" before performing the reset. This prevents connection issues when you set it up again.