A factory reset clears all data and returns your tracker to its original state
A factory reset on your Fitbit Charge HR wipes the device clean—removing all your activity history, settings, and paired accounts. This is the most complete reset available and is useful when you're troubleshooting a frozen or unresponsive tracker, preparing to sell or give away the device, or starting fresh after syncing problems. The process takes about a minute and requires only your tracker and a computer or phone with the Fitbit app.
There are two ways to reset: through the Fitbit app (easiest for most people) or using the physical button on the device itself (useful if the app won't open or your phone isn't nearby). Both methods produce the same result.
Key Takeaways
- A factory reset erases all data on your Charge HR and returns it to factory settings, which is different from straightforward restarting the device.
- The Fitbit app method is the fastest route: open the app, find your device in settings, and select "Clear User Data."
- If the app won't respond, you can reset using the physical button on the back of the tracker by holding it for 10 to 15 seconds.
- After a reset, your Charge HR will ask you to pair it again with your phone or computer before it starts tracking.
- A straightforward restart (holding the button for 3 to 5 seconds) fixes most freezing or lag problems and does not erase your data.
Reset through the Fitbit app on your phone
Open the Fitbit app on your phone and tap the profile icon (usually in the bottom right corner). Find your Charge HR in the list of devices and tap it. Scroll down until you see "Clear User Data" or "Factory Reset"—the exact wording depends on your app version. Tap that option, and the app will ask you to confirm. Once you confirm, the reset begins when ready.
Your tracker will show a loading screen or animation for 30 to 60 seconds. Do not disconnect or remove the device during this time. When the reset finishes, your Charge HR will display the pairing screen, which means it is ready to be set up again. You can then re-pair it with your account.
Reset using the physical button on the device
If your Charge HR is unresponsive or the app won't open, use the button on the back of the tracker. Locate the small button on the rear of the device (it sits flat against the back). Press and hold this button for 10 to 15 seconds without releasing. You should see the Fitbit logo appear on the screen, followed by a loading animation.
Keep holding the button until the animation stops and the pairing screen appears. This usually takes 15 to 20 seconds total. Release the button once you see the pairing screen. Your device is now reset and ready to pair again.
The difference between a restart and a factory reset
A restart is a quick reboot that keeps all your data intact. It fixes most temporary problems like a frozen screen or slow syncing. To restart, hold the button on the back for 3 to 5 seconds until you see the Fitbit logo, then release. The device will turn off and back on within a few seconds.
A factory reset erases everything—all your activity data, custom settings, and paired accounts. Use a factory reset only when a restart does not solve the problem, or when you are preparing to give the device to someone else. If you want to keep your data, always try a restart first.
What to do after your tracker resets
After the reset completes, your Charge HR will show a pairing screen. Open the Fitbit app on your phone and tap the plus icon (or "Set Up Device" if this is a new setup). Select Charge HR from the list of devices. The app will search for your tracker and connect to it automatically.
Once paired, you can sign into your Fitbit account and your historical data will appear in the app—the reset only erased data stored on the device itself, not data already synced to your account. Your tracker will begin recording new activity when ready.
When to reset instead of troubleshooting
Reset your Charge HR if the device is frozen and a restart does not unfreeze it, if it will not sync to the app after multiple attempts, if the screen is unresponsive to button presses, or if you are selling or giving it away and want to remove your personal data. A reset is also worth trying if the tracker is draining battery unusually fast or if it stops recognizing your wrist.
Do not reset if you straightforward want to clear your activity history—use the Fitbit app to delete individual workouts or days instead. Resetting the device is a more drastic step and should be reserved for actual problems or device transfers.
Frequently Asked Questions
Will I lose my activity history if I factory reset?
Data already synced to your Fitbit account will remain in the app and on the Fitbit website. Only data stored on the device itself is erased. If you have not synced in a while, you may lose a few days of activity that was only on the tracker.
Can I undo a factory reset?
No, a factory reset cannot be undone. Once complete, all data on the device is gone. If your data was synced to your account before the reset, it will still be in the app. If it was not synced, it is lost permanently.
How long does a factory reset take?
The reset itself takes 30 to 60 seconds. Re-pairing the device with your phone takes another 1 to 2 minutes. The entire process from start to finish is usually under 5 minutes.
What if my Charge HR won't turn on after a reset?
Plug the tracker into its charging cable and let it charge for at least 30 minutes. A reset can drain the battery, and the device may not power on until it has enough charge. Once it has charged, press the button again to see if the pairing screen appears.
Do I need to unpair my Charge HR before resetting it?
No, you do not need to unpair first. The factory reset will disconnect the device from your account automatically. After the reset, you can pair it again with the same account or a different one.