Reset your Fitbit Inspire 3 by holding the button on the back for 10 to 12 seconds until the screen goes black, then release
A reset clears all data from your device and returns it to factory settings. You will lose your activity history, alarms, and any custom settings stored on the watch itself. Your account data in the Fitbit app stays intact—when you reconnect the device, your history syncs back. Reset when the device freezes, stops responding to taps, or fails to sync with your phone.
The reset process takes less than a minute and requires no computer or app. You only need the Fitbit Inspire 3 itself and your finger.
Key Takeaways
- Hold the button on the back of the Inspire 3 for 10 to 12 seconds until the screen goes completely black and the Fitbit logo appears.
- A reset erases activity data stored on the device but preserves your account information in the Fitbit app.
- After the reset completes, you must reconnect the device to your phone through the Fitbit app before it will track again.
- If the device still does not respond after a reset, try charging it fully and then resetting again.
Locate the button on the back of your device
The Fitbit Inspire 3 has a single button on the back, near the bottom edge where the band attaches. It is a small, slightly raised circle. You will feel it when you run your finger across the back of the watch.
Remove the device from your wrist or place it on a flat surface so you can press the button firmly with your thumb or index finger. You need steady pressure for the full 10 to 12 seconds, so a stable position makes the reset easier.
Press and hold the button until the screen goes black
Press the button on the back with steady, firm pressure. Do not tap—hold it down. The screen will remain on and may show a loading animation or progress bar.
Keep holding. After about 10 to 12 seconds, the screen will go completely black. You may see the Fitbit logo appear briefly. Once the screen is black and stays black for a moment, release the button. The reset is complete.
If the screen turns off before 10 seconds, you released too early. Try again from the start. If you hold for longer than 12 seconds, the device will still reset—you have not damaged it.
Wait for the device to restart
After you release the button, the Inspire 3 will restart. This takes 10 to 20 seconds. The screen may stay black, then show the Fitbit logo, then display a blank or default screen. Do not press the button again during this time.
Once the screen shows the normal watch face or a setup screen, the reset is finished. The device is now in factory condition with no personal data stored on it.
Reconnect the device to the Fitbit app
Open the Fitbit app on your phone. Tap the profile icon, then select "Set Up a Device." Choose Fitbit Inspire 3 from the list. The app will search for your device and ask you to confirm the connection by tapping the button on the back of the watch when prompted.
Once reconnected, your account data will sync to the device. Your activity history, goals, and other information stored in your Fitbit account will reappear. The reset only removed data stored on the watch itself, not data in your account.
Troubleshoot if the reset does not work
If the screen does not respond or the button press has no effect, the device may have a low battery. Charge the Inspire 3 for at least 30 minutes using the included charging cable, then try the reset again.
If the device still does not respond after charging and a second reset attempt, try force-restarting it. Press and hold the button for 15 to 20 seconds instead of 10 to 12. Some devices need the longer hold to force a restart when they are completely unresponsive. If the device still does not wake up after this, contact Fitbit support with your device serial number, which you can find in the Fitbit app under device settings.
What data is erased and what is saved
A reset removes all information stored directly on the Inspire 3: your step count, heart rate history, sleep data, alarms, and any custom watch faces or settings you configured on the device. This data is gone and cannot be recovered from the device.
Your Fitbit account in the cloud is not affected. Your account email, password, friends list, and any data synced to the app before the reset remain intact. When you reconnect the device, it will sync with your account again and show your historical data in the app. The device itself starts fresh, but your account history is preserved.
Frequently Asked Questions
Will I lose my step count and activity history?
The activity data stored on the device itself is erased. However, any data that synced to the Fitbit app before the reset stays in your account. When you reconnect the device, you will see your historical data in the app, but the device will start counting steps from zero.
Do I need to set up the device again after a reset?
Yes. After the reset, open the Fitbit app and go through the setup process again to reconnect the device to your account. This takes about two minutes and pairs the watch with your phone so it can sync data.
What if the button does not work at all?
Charge the device fully first—a low battery can prevent the button from responding. If the button still does not work after charging, the hardware may be damaged. Contact Fitbit support with your device serial number and purchase information.
Can I reset the device without losing my account data?
Yes. The reset only erases data on the device, not data in your Fitbit account. Your account information, historical data, and settings in the app are preserved and will sync back when you reconnect.
How long does a reset take?
The button hold takes 10 to 12 seconds, and the device restarts in another 10 to 20 seconds. The entire process from start to finish takes about 30 seconds. Reconnecting through the app adds another two to three minutes.