Reset your Fitbit Sense 2 by holding the back button for 10 to 15 seconds until the screen goes black, then release
A reset wipes your device back to factory settings and clears all data stored on it — your activity history, heart rate logs, and personal settings all disappear. You should reset only when the device is frozen, not responding to taps, or before you sell or give it away. If you are having trouble syncing or the screen is glitchy, try restarting first (hold the back button for 3 to 5 seconds until you see the Fitbit logo), which keeps your data intact.
The reset process itself takes less than a minute. After the screen goes black, wait 10 to 15 seconds for the Fitbit logo to appear, then release the button. The device will restart and show the setup screen, the same one you saw when you first turned it on. Your data is gone at this point and cannot be recovered from the device itself.
Key Takeaways
- Hold the back button (the one on the left side of the watch) for 10 to 15 seconds until the screen turns black and the Fitbit logo appears.
- A reset erases all activity history, heart rate data, and personal settings stored on the watch itself, but your synced data remains in the Fitbit app on your phone.
- If your watch is just slow or glitchy, restart it instead by holding the back button for only 3 to 5 seconds — this keeps your data on the device.
- After a reset, you will need to set up the watch again using the Fitbit app, including reconnecting it to your phone and re-entering your personal information.
When to reset versus when to restart
Restart the device first if it is frozen, slow, or not responding to taps. Hold the back button for 3 to 5 seconds until you see the Fitbit logo appear on the screen, then release. The watch will turn off and back on, and all your data stays on the device. This fixes most temporary glitches without erasing anything.
Reset only if restarting does not work, the device will not turn on at all, or you are preparing to sell or give away the watch. A reset is permanent — once you release the button after seeing the logo, the data on the device is gone. Your synced activity (steps, heart rate, sleep) remains in the Fitbit app on your phone, but anything stored only on the watch is lost.
Step-by-step reset process
Locate the back button on the left side of the watch face. It is the only physical button on the Sense 2. Press and hold it down firmly.
Keep holding the button as the screen goes black. Do not release yet. After a few seconds, you will see the Fitbit logo appear in the center of the screen. Continue holding for the full 10 to 15 seconds even after the logo shows.
Release the button once the logo is visible and the screen has gone through its initial black phase. The watch will now restart and display the setup screen, which shows language options and the Fitbit logo. This is the same screen you saw when you first unboxed the device.
What happens after the reset
The watch will ask you to choose a language and then prompt you to open the Fitbit app on your phone to reconnect. You cannot use the watch without pairing it to the app again. Open the Fitbit app, tap the plus icon to add a device, and select Fitbit Sense 2 from the list.
The app will walk you through reconnecting the watch to your phone via Bluetooth. You will also need to re-enter your personal information — height, weight, age, and gender — because the reset cleared these settings. Your historical data that was already synced to the app before the reset will still be there and will show in your activity timeline.
After reconnecting, the watch will sync with the app and begin tracking again. Any data you collected before the reset remains in the app, but the watch itself starts fresh with zero steps, zero heart rate history, and no saved workouts.
Troubleshooting a reset that does not work
If the screen does not go black or the Fitbit logo does not appear after 15 seconds, release the button and try again. Make sure you are pressing the back button on the left side of the watch, not the screen itself. The button should feel like a small raised dot under your thumb.
If the watch is completely unresponsive and will not turn on, plug it into the charging cable and let it charge for at least 30 minutes. A completely drained battery can prevent the reset from working. After charging, try the reset again.
If the watch still will not reset after charging and multiple attempts, the device may have a hardware issue. Contact Fitbit support through the app or the Fitbit website — you will need your device serial number, which you can find in the app under Settings > About.
Protecting your data before a reset
Your synced data is safe in the Fitbit app as long as you have signed in with your Fitbit account before the reset. The app stores your activity history, heart rate trends, sleep data, and weight logs on Fitbit's servers, not on the watch. A reset only erases what is stored on the device itself.
If you are concerned about losing anything, open the Fitbit app before you reset and check that your recent activity appears there. Scroll through your timeline to confirm your steps, workouts, and heart rate data are showing. If they are, you can reset without worry — everything will still be in the app afterward.
If you have not synced in a while, plug in the watch and open the app to force a sync before resetting. This ensures all your recent data is backed up to the app.
Frequently Asked Questions
Will I lose my activity history if I reset?
Your activity history that was already synced to the Fitbit app stays in the app. Only data stored on the watch itself is erased. If you have not opened the app in weeks, any recent activity may not have synced yet, so check the app before you reset to make sure your data is backed up.
Can I undo a reset?
No. Once the reset is complete, the data on the device is gone permanently. Your synced data in the app cannot be restored to the watch — you would need to set up the watch again and let it collect new data going forward. Always confirm your data is in the app before resetting.
How long does a reset take?
The reset itself takes about 30 seconds from the moment you hold the button until the setup screen appears. Reconnecting the watch to your phone through the app takes another 5 to 10 minutes depending on your Bluetooth connection and phone speed.
Do I need to charge the watch before resetting?
The watch should have at least 20 percent battery to reset safely. If the battery is very low, plug it in for 15 to 30 minutes first. A reset on a nearly dead battery may not complete properly.
What is the difference between a restart and a reset?
A restart (3 to 5 seconds on the back button) turns the watch off and back on, keeping all your data. A reset (10 to 15 seconds) erases everything on the device and returns it to factory settings. Always try a restart first if the watch is just slow or glitchy.