A factory reset clears all data and returns your Charge HR to its original state

A factory reset on your Charge HR wipes the device clean — it removes all your activity data, settings, and synced information, then restores the tracker to how it came from the factory. You would do this if the device is frozen, not syncing to your phone, or if you are giving it to someone else. The reset itself takes less than a minute, but you should know that the data is gone afterward and cannot be recovered from the device.

Before you reset, sync your Charge HR to the Fitbit app one last time if you can. The app stores a copy of your data on Fitbit's servers, so your history remains in your account even after the device is wiped. If the tracker will not sync, you can still reset it — you will just lose any data recorded since the last successful sync.

Key Takeaways

  • A factory reset erases all data on the Charge HR itself, but your historical data stays in the Fitbit app if you synced before resetting.
  • The reset process involves holding the button on the back of the device for 10 to 15 seconds until you see a specific screen response.
  • After a reset, you must re-pair the Charge HR to your phone through the Fitbit app before it will track or sync again.
  • A reset fixes most freezing, syncing, and performance problems without needing to contact Fitbit support.

How to perform a factory reset on your Charge HR

Locate the small button on the back of your Charge HR, near the charging contacts. Press and hold this button for 10 to 15 seconds. You will see the Fitbit logo appear on the screen, followed by a series of dashes or a progress indicator. Keep holding until the screen goes blank or shows a confirmation message — this usually takes about 15 seconds total.

Once the screen clears, release the button. The device will restart and show the Fitbit logo again. This is normal. Wait for the tracker to finish booting, which takes another 10 to 20 seconds. When it is ready, the screen will show a blank or default state, and the reset is complete.

If nothing happens after 15 seconds of holding the button, try again. Make sure you are pressing the actual button and not just touching the back of the device. The button is small and recessed, so you may need to use your fingernail or a stylus to reach it properly.

Re-pairing your Charge HR after a reset

After the reset, your Charge HR is no longer connected to your phone or account. Open the Fitbit app on your phone and tap the profile icon (usually in the bottom right corner). Select "Set Up a Device" or "Add Device," depending on your app version. The app will search for nearby Fitbit devices.

When your Charge HR appears in the list, tap it to begin pairing. Follow the on-screen prompts to confirm the pairing. This usually involves entering a code or confirming a match between your phone and the device. Once pairing is complete, your Charge HR will sync with the app, and you can start using it again.

If the app does not find your device, make sure Bluetooth is turned on in your phone's settings and that you are within 30 feet of the tracker. Try closing the Fitbit app completely and reopening it, then searching again.

When a reset does not solve the problem

If your Charge HR still will not sync, freezes, or behaves oddly after a reset and re-pairing, the issue may be a software glitch that a reset cannot fix. Try uninstalling and reinstalling the Fitbit app on your phone. This clears out any corrupted app data without affecting your account or the device itself.

If the device still does not work, check whether your Charge HR is fully charged. A low battery can cause the tracker to behave unpredictably. Plug it into the charging cable for at least 30 minutes, then try syncing again.

If none of these steps work, the hardware itself may be damaged. At that point, contact Fitbit support through the app or the Fitbit website. They can determine whether the device is still under warranty and what repair or replacement options are available to you.

What data you lose and what you keep

A factory reset removes everything stored on the Charge HR itself: your activity history, heart rate data, sleep records, and any custom settings you configured. However, if you synced the device to the Fitbit app before resetting, all that data is already backed up on Fitbit's servers and remains in your account.

When you re-pair the device after the reset, you will see all your old data in the app — steps, calories, workouts, and sleep logs. The Charge HR will start fresh from the moment of the reset, so any activity recorded between your last sync and the reset will be lost. This is usually only a few hours or a day at most if you sync regularly.

Reasons to reset your Charge HR

The most common reason to reset is when the device freezes or becomes unresponsive. If tapping the screen or pressing the button does nothing, a reset often brings it back to life. Syncing problems are another frequent trigger — if your Charge HR records data but will not send it to the app, or if the app cannot find the device, a reset followed by re-pairing usually fixes it.

You might also reset before giving the device to someone else, to may support your personal data is completely removed. A reset is also worth trying if the tracker is draining battery unusually fast or if the display is behaving strangely.

One situation where a reset will not help is if the device has a hardware fault — a cracked screen, water damage, or a broken button. In those cases, the problem is physical, and a reset cannot repair it.

Frequently Asked Questions

Will I lose my activity history if I reset my Charge HR?

Your activity history on the Charge HR itself will be erased, but if you synced the device to the Fitbit app before resetting, all your data is saved in your account. When you re-pair the device, you will see all your old activity in the app. Only data recorded after your last sync will be lost.

How long does a factory reset take?

The reset itself takes about 15 to 20 seconds from the moment you press the button until the device restarts. Re-pairing with your phone takes another 2 to 5 minutes. The entire process is usually done within 10 minutes.

What if my Charge HR is frozen and I cannot press the button?

If the screen is completely unresponsive, try charging the device for 30 minutes first — a very low battery can cause the tracker to freeze. Once it has some charge, attempt the reset again. If it is still frozen after charging, the device may have a hardware issue.

Do I need to reset my Charge HR before selling it?

Yes, you should perform a factory reset before giving or selling your Charge HR to someone else. This removes all your personal data, including activity history and any saved settings. After the reset, the new owner can set it up as a new device in their own Fitbit account.

Can I undo a factory reset?

No, a factory reset cannot be undone. However, your data is not permanently lost if you synced before resetting — it remains in your Fitbit account. When you re-pair the device, your historical data will reappear in the app.