Reset Your Fitbit Charge HR in Three Steps

A reset clears all data from your Fitbit Charge HR and returns it to factory settings. You do this by holding down the button on the left side of the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then release. The device will vibrate and restart. After the reset completes, you will need to pair it again with the Fitbit app on your phone or computer.

A full reset is different from a straightforward restart. A restart (holding the button for 5 to 8 seconds) fixes freezing or unresponsiveness but keeps your data. A reset erases everything — your step count, heart rate history, and all settings — so use it only when the device is not responding to a restart or when you are preparing to give it away or sell it.

Key Takeaways

  • Hold the left button for 10 to 15 seconds until the Fitbit logo appears to perform a full reset that erases all data.
  • A restart (5 to 8 seconds) fixes most freezing or lag problems without erasing your information.
  • After a reset, you must pair the device again using the Fitbit app before it will track activity.
  • Charge your device to at least 50 percent battery before resetting to avoid interrupting the process.

When to Restart Instead of Reset

Most problems with the Charge HR — the screen not updating, the device not syncing, or buttons not responding — clear up with a restart. Hold the button on the left side for 5 to 8 seconds. You will see the Fitbit logo, and the device will vibrate. Release the button and wait 10 seconds for it to finish restarting. Your data stays intact.

Try a restart first if your device is slow, frozen, or not syncing to your phone. Only move to a full reset if the restart does not fix the problem or if you are troubleshooting a pairing issue that the Fitbit app cannot resolve. Restarting takes less than a minute and preserves months of activity history.

How to Reset and Re-Pair Your Device

After the reset completes, the Charge HR will show the Fitbit logo and then a blank screen. Open the Fitbit app on your phone or computer. Tap the profile icon (usually in the bottom right corner), then select your device from the list. Choose "Set Up Device" or "Add Device" and follow the on-screen steps to reconnect.

During pairing, the app will ask you to hold your device close to your phone and wait for the Bluetooth connection to establish. This usually takes 30 seconds to 2 minutes. Once paired, your device will sync and begin tracking again. You will not recover data from before the reset — the device starts fresh with a new activity history.

Troubleshooting a Reset That Does Not Work

If the Fitbit logo does not appear after holding the button for 15 seconds, the battery may be too low. Plug the device into the charging cable and charge it for at least 30 minutes, then try again. A device with very low battery sometimes will not respond to button presses.

If the device still does not reset after charging, try holding the button for up to 20 seconds. Some Charge HR units require a longer press. If the screen remains blank or frozen after 20 seconds, disconnect the charger, wait 5 minutes, reconnect it, and try once more. If the device does not respond after these steps, contact Fitbit support with your device serial number (found in the Fitbit app under device settings).

What Happens to Your Data After a Reset

A reset erases everything stored on the device itself: your step count, distance, calories burned, heart rate data, and any custom settings like clock face or alarm times. Data that synced to the Fitbit app before the reset remains in your account online and will not be deleted.

If you want to keep a record of your activity before resetting, open the Fitbit app and take screenshots of your stats, or export your data if your Fitbit account type supports it. After the reset, when you pair the device again, it will begin recording new data from that point forward.

Preparing Your Device for Sale or Donation

Before giving away or selling your Charge HR, perform a full reset to remove all personal data. After the reset completes and the device restarts, do not pair it again. Unpair it from your Fitbit account by opening the app, going to your device settings, and selecting "Remove Device" or "Unpair." This step is important — it disconnects the device from your account so the new owner can set it up under their own account.

Charge the device to full battery before handing it over. The new owner will see a blank device ready for setup and will be able to create their own Fitbit account and pair it without any of your previous information present.

Frequently Asked Questions

Will resetting my Fitbit Charge HR delete data from the Fitbit app?

No. Data stored in your Fitbit app account online stays there. Only information on the device itself is erased. When you pair the device again, it syncs with your account, and you can see your history in the app.

How long does a reset take?

The reset itself takes 10 to 15 seconds of button holding. The device then restarts, which takes another 10 to 20 seconds. Re-pairing with the app takes 1 to 3 minutes. Total time is usually under 5 minutes.

Can I reset my Charge HR while it is charging?

Yes, you can reset while the device is on the charger. In fact, it is a good idea to charge it first to make sure the battery is strong enough to complete the reset without interruption.

What if I forget my Fitbit password after resetting?

You can reset your Fitbit account password on the Fitbit website by clicking "Forgot Password" on the login page. You will receive an email with a link to create a new password. This does not affect the device reset — it only resets your account access.

Do I lose my friends list and challenges when I reset?

No. Your Fitbit app account, friends, and challenges remain unchanged. Resetting the device only clears the data stored on the hardware itself, not your online account.