The two ways to reset your Fitbit Charge 2

A reset clears your Fitbit Charge 2 back to factory settings, erasing all your stored data and returning the device to the state it arrived in. You have two options: a soft reset, which restarts the device without erasing anything, and a hard reset, which wipes everything. Most problems—freezing, syncing failures, unresponsive buttons—are fixed by a soft reset. Use a hard reset only if you are selling the device, giving it away, or troubleshooting a problem that a soft reset did not solve.

Both resets take less than a minute and require nothing but your Charge 2 and a few seconds of patience. Neither one will damage the device or void any warranty.

Key Takeaways

  • A soft reset restarts your Charge 2 without erasing data and fixes most freezing or syncing problems.
  • A hard reset wipes all stored data and returns the device to factory settings, so back up your data first if you want to keep it.
  • Perform a soft reset by holding the back button for 10 to 15 seconds until you see the Fitbit logo.
  • Perform a hard reset by holding the back button for 10 to 15 seconds, waiting for the device to restart, then holding the back button again for another 10 to 15 seconds.

How to soft reset your Charge 2

A soft reset is the first step to try whenever your Charge 2 is not working as expected. It does not erase any of your data, steps, heart rate readings, or personal settings—it straightforward restarts the device the way restarting a phone or computer does.

Locate the button on the back of your Charge 2, below the screen. Press and hold that button for 10 to 15 seconds without releasing. You will see the Fitbit logo appear on the screen, followed by a brief animation. Once the logo disappears and the screen returns to normal, the soft reset is complete. Your Charge 2 will now restart with all your data intact.

If your device was frozen or unresponsive, it should now work normally. If the problem persists after a soft reset, try syncing your Charge 2 to your phone or computer using the Fitbit app. If syncing does not help, move on to a hard reset.

How to hard reset your Charge 2

A hard reset erases everything stored on your Charge 2—all your activity data, personal settings, and any customizations you made. Use this only when you plan to give away or sell the device, or when a soft reset has not solved your problem. Before you hard reset, make sure your data has synced to the Fitbit app or your Fitbit account, because once the reset is complete, that data will be gone from the device.

Hold the back button for 10 to 15 seconds until you see the Fitbit logo appear. Release the button and let the device restart completely. This may take 30 seconds. Once the screen returns to normal and shows the Fitbit logo or a blank screen, when ready press and hold the back button again for another 10 to 15 seconds. You may see a message asking you to confirm the reset, or the device may straightforward restart. Once the second restart is complete, your Charge 2 has been returned to factory settings.

After a hard reset, your Charge 2 will be blank and ready to pair with a new account or the same account from scratch. Open the Fitbit app, select "Set up a new device," and follow the pairing steps as if you were setting up the Charge 2 for the first time.

When to soft reset versus hard reset

Use a soft reset if your Charge 2 is frozen, not responding to button presses, failing to sync with the app, or showing incorrect data. A soft reset fixes most of these problems because it clears temporary glitches without removing your settings or history.

Use a hard reset only in these situations: you are selling or giving away the device and want to erase your personal data; you have tried a soft reset and the problem persists; or you are troubleshooting a serious issue that Fitbit support has recommended a hard reset for. A hard reset is also the right choice if you want to pair your Charge 2 with a different Fitbit account.

What to do if your Charge 2 does not respond to a reset

If holding the back button does not produce the Fitbit logo or any response, your device may have a low battery. Plug your Charge 2 into its charging cable and let it charge for at least 30 minutes, then try the soft reset again. The device needs enough power to restart.

If the device still does not respond after charging, try a different USB port or charging cable if you have one available. A faulty cable can prevent both charging and the device from responding to button presses. If you have access to another Fitbit Charge 2, you can also test whether the charging cable works with that device to rule out a cable problem.

If your Charge 2 remains unresponsive after charging and you have confirmed the cable works, the device may have a hardware failure. Contact Fitbit support through the Fitbit app or the Fitbit website to discuss repair or replacement options.

Syncing your data before a hard reset

Before you hard reset, open the Fitbit app on your phone or computer and make sure your Charge 2 is synced. The app will show your recent activity, steps, heart rate, and sleep data. If you see data in the app that you want to keep, that data is already saved to your Fitbit account and will not be lost when you reset the device.

To sync manually, open the Fitbit app, tap the profile icon, select your Charge 2, and tap the sync button. Wait for the sync to complete—you will see a checkmark or confirmation message. Once syncing is done, you can safely hard reset your device without losing any historical data from your account.

Frequently Asked Questions

Will a soft reset erase my steps and activity data?

No. A soft reset only restarts the device and does not remove any data stored on your Charge 2 or in your Fitbit account. All your steps, heart rate readings, sleep records, and personal settings remain unchanged.

How long does a hard reset take?

The entire hard reset process takes about one to two minutes from start to finish. The device will restart twice—once after the first button hold and again after the second. Each restart takes 20 to 30 seconds.

Can I undo a hard reset?

No, a hard reset cannot be undone. However, if your data was synced to the Fitbit app before the reset, that data is still in your Fitbit account and will reappear once you pair the device again. Only data stored on the device itself is erased.

What if the back button is stuck or broken?

If the button does not move or feels stuck, do not force it. Contact Fitbit support to discuss repair options. Forcing a stuck button can cause further damage to the device.

Do I need to unpair my Charge 2 before a hard reset?

No, you do not need to unpair it first. A hard reset will automatically disconnect your Charge 2 from your Fitbit account. After the reset, you can pair it again with the same account or a different one.