The quickest way to restart your Fitbit

Most Fitbit devices restart by holding down the button on the side or bottom for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then releasing. The exact button location and timing depend on your model — a Charge 5 uses the side button, while an Inspire 3 uses the bottom button. After the logo appears and fades, your device will restart and show the time or home screen within 30 seconds.

A restart clears temporary glitches that cause the device to freeze, stop syncing with your phone, or drain the battery unusually fast. It does not erase your data or settings. If your Fitbit is completely unresponsive or the button method does not work, you may need a factory reset instead, which does erase everything and requires you to set up the device again from scratch.

Key Takeaways

  • Hold the button on your Fitbit for 10 to 15 seconds until the Fitbit logo appears, then release to restart.
  • A restart fixes freezing, syncing problems, and battery drain without erasing your data or personal settings.
  • The button location varies by model: Charge and Sense models use the side button, while Inspire and Flex models use the bottom button.
  • If the restart does not work after two attempts, try charging your device for at least 15 minutes before trying again.
  • A factory reset erases all data and should only be used if a restart does not solve the problem.

Restart steps for each Fitbit model

The restart process is nearly identical across all Fitbit models, but the button location changes. Locate the button on your device first, then follow the timing below.

Fitbit ModelButton LocationHold Time
Charge 5, Charge 6Side button10 to 15 seconds
Inspire 3, Inspire 2Bottom button10 to 15 seconds
Sense, Sense 2Side button10 to 15 seconds
Flex 2Bottom button10 to 15 seconds
Ace 3Bottom button10 to 15 seconds

If you are unsure which button to press, check the back of your device or the original box — the model name is printed there. Once you have located the button, press and hold it steadily. Do not tap repeatedly; one continuous press works better. You should feel the device vibrate or see the screen change slightly as you hold the button. Keep holding until the Fitbit logo appears in the center of the screen.

What to do if the restart does not work

If you held the button for 15 seconds and nothing happened, your device may have a low battery. Plug your Fitbit into its charging cable and let it charge for at least 15 minutes, then try the restart again. A device with very little battery power may not respond to button presses at all.

If the device still does not restart after charging, try the button press one more time, holding for the full 15 seconds. Some devices need a longer hold on the second attempt. If the screen remains frozen or blank after two restart attempts, a factory reset may be necessary. This erases all your data, so it should be your last option before contacting Fitbit support.

How to do a factory reset if restart fails

A factory reset returns your Fitbit to its original state, as if it just came out of the box. This erases all your activity data, heart rate history, and custom settings. Only do this if a regular restart does not fix the problem.

To factory reset, hold the button for 10 to 15 seconds as you would for a restart. When the Fitbit logo appears, continue holding the button for another 5 to 10 seconds until you see a second screen or message appear — this is usually a confirmation screen or a second logo. Then release. The device will restart and show a setup screen, which means the factory reset worked. You will need to open the Fitbit app on your phone and set up the device again, which will restore your account and data from the cloud.

Common reasons your Fitbit needs a restart

Fitbit devices occasionally freeze or stop responding to touch, especially after a software update or if the app on your phone has not synced in several days. A restart clears the device's temporary memory and usually fixes these issues within minutes.

Battery drain that seems unusually fast — losing 20 percent or more in a single day — sometimes stops after a restart. Syncing problems, where your steps or heart rate do not appear in the app even though the device is connected to your phone, also often resolve with a restart. If your Fitbit screen is unresponsive to swipes or taps, a restart is the first troubleshooting step before trying anything else.

When to restart versus when to factory reset

Use a restart first for any problem: freezing, syncing delays, battery drain, or unresponsive screen. A restart takes less than a minute and keeps all your data intact. Most issues resolve after a restart.

Use a factory reset only if a restart does not work after two attempts and your device is fully charged. A factory reset erases everything, so it should be your last step before contacting Fitbit support or considering a replacement. After a factory reset, you will set up the device again through the Fitbit app, and your historical data will return from your cloud account once setup is complete.

Frequently Asked Questions

Will restarting my Fitbit erase my data?

No. A restart clears only temporary memory and does not touch your activity history, heart rate data, or settings. All your information stays on the device and in your Fitbit account. A factory reset does erase data, but that is a different process used only when a restart fails.

How long does a restart take?

A restart usually takes 30 to 60 seconds from the moment you release the button. You will see the Fitbit logo appear, then the screen will go blank briefly, and then your device will show the time or home screen. If it takes longer than two minutes, try holding the button again.

Can I restart my Fitbit while it is charging?

Yes, you can restart while the device is plugged in. In fact, if your battery is very low, charging for 15 minutes before the restart attempt often helps the device respond to the button press.

What if my Fitbit still does not work after I restart it?

Try charging it fully, then restart one more time. If the problem persists, check the Fitbit app on your phone to see if there is a pending software update — install it and restart again. If none of these steps work, a factory reset is the next option, though it will erase your data.

Do I need to restart my Fitbit regularly?

No, a restart is only needed when you notice a problem like freezing, syncing delays, or unusual battery drain. Most Fitbit devices run smoothly without regular restarts. Restarting once every few months during normal use is fine, but it is not necessary for maintenance.