The Two Ways to Restart Your Fitbit Charge 5

A restart clears temporary glitches without erasing your data or settings. Your Fitbit Charge 5 has two restart methods: a soft restart (which takes 10 seconds) and a factory reset (which wipes everything). Most of the time, a soft restart fixes freezing, unresponsive screens, or syncing problems. You only need a factory reset if the device stops working entirely or you plan to give it away.

A soft restart is safe to try first. It's like turning a computer off and back on—your steps, heart rate data, and all your personal settings stay exactly as they are. The process takes less than a minute and requires nothing but your device.

Key Takeaways

  • A soft restart takes 10 seconds and fixes most problems like frozen screens or missed syncs without losing any data.
  • Hold the back button and the bottom button together until you see the Fitbit logo appear on the screen.
  • A factory reset erases all your data and settings, so only use it if the device is completely unresponsive or you're selling it.
  • After any restart, your Fitbit will reconnect to your phone automatically if the Fitbit app is still installed.

How to Do a Soft Restart in 10 Seconds

Locate the two buttons on the back of your Charge 5. The back button is the small button on the left side of the back panel. The bottom button is directly below it. Press and hold both buttons at the same time. Do not release them.

Keep holding for about 10 seconds. You will see the Fitbit logo appear on the screen—it looks like a circle with a dot in the middle. Once the logo shows, you can release both buttons. The device will finish restarting on its own, which takes another 5 to 10 seconds. You will see the clock face or your normal home screen when it's done.

If the screen does not respond after 15 seconds of holding, try again. Make sure you are pressing both buttons firmly and evenly. Some people accidentally press only one button or press too lightly.

When a Soft Restart Fixes Common Problems

A soft restart solves most everyday issues. If your screen is frozen and taps do not work, a restart usually brings it back to life. If your Charge 5 is not syncing with your phone—meaning your steps or heart rate data are not showing up in the app—a restart often fixes that too.

Restart also helps if the device feels sluggish, if notifications stop appearing, or if the screen goes black but the device is still on. These are all signs that the software needs a fresh start. After the restart, your Fitbit will work normally again in most cases.

If the problem returns within a few days, the issue may be with the Fitbit app itself rather than the device. Try uninstalling and reinstalling the app on your phone, then syncing again.

How to Do a Factory Reset (Erases Everything)

A factory reset returns your Charge 5 to the state it was in when you first unboxed it. All your data—steps, workouts, heart rate history, and personal settings—will be deleted. Only do this if a soft restart did not work or if you are giving the device to someone else.

To factory reset, hold the back button and bottom button together just like a soft restart. This time, keep holding them for about 10 to 15 seconds. You will see the Fitbit logo appear, but do not release the buttons yet. Keep holding until you see a second screen appear with a trash can icon or a message saying "Clear data." Release the buttons when you see that screen.

The device will then ask you to confirm. Tap the bottom button to confirm the reset. The Charge 5 will restart and show the setup screen, just like when it was brand new. You will need to pair it with your phone again using the Fitbit app.

What Happens After You Restart

After a soft restart, your Charge 5 will reconnect to your phone automatically within a few minutes if the Fitbit app is still installed and running. You do not need to do anything—just wait. If it does not sync within 5 minutes, open the Fitbit app and manually tap the sync button (usually a circular arrow icon at the top of the screen).

After a factory reset, your device will show the setup screen. Open the Fitbit app on your phone, tap the plus icon to add a new device, and follow the on-screen steps to pair your Charge 5 again. The pairing process takes about 2 to 3 minutes. Once paired, your device will start collecting new data, but your old data is gone.

Troubleshooting If the Restart Does Not Work

If you hold both buttons for 15 seconds and nothing happens, the battery may be completely drained. Plug your Charge 5 into its charging cable and let it charge for at least 30 minutes. Then try the soft restart again. A completely dead battery can prevent the device from responding to button presses.

If the device still does not restart after charging, try the buttons one more time but hold them for a full 20 seconds instead of 10. Press firmly and make sure both buttons are making contact. If nothing appears on the screen after 20 seconds, the device may have a hardware problem that a restart cannot fix.

As a last step before contacting Fitbit support, try the factory reset process. Even if the screen seems unresponsive, holding the buttons for 15 seconds and waiting for the trash can icon may still work. If the factory reset screen never appears, the device likely needs professional service.

Frequently Asked Questions

Will restarting my Fitbit erase my data?

A soft restart does not erase anything. A factory reset erases all your data, steps, workouts, and settings. If you only want to fix a frozen screen or syncing problem, use the soft restart method.

How often should I restart my Fitbit Charge 5?

You only need to restart when something is not working right—a frozen screen, missed syncs, or sluggish performance. You do not need to restart it regularly like a phone. Most people restart once every few months or less.

What if my Fitbit is stuck on the Fitbit logo screen?

If the logo stays on the screen for more than 30 seconds, the restart may not have completed. Try a soft restart again. If it gets stuck on the logo a second time, try charging the device for 30 minutes and then restart once more.

Can I restart my Fitbit while it's charging?

Yes, you can restart while it is plugged in. It is actually safer to restart while charging because you know the battery will not die during the process. Just make sure the charging cable is connected properly.

Do I need to restart before syncing with a new phone?

No, you do not need to restart before switching phones. Just open the Fitbit app on your new phone, sign in with your account, and tap the sync button. Your Charge 5 will reconnect automatically. A restart is only needed if syncing is not working.