The quickest way to restart your Fitbit

Most Fitbit devices restart by holding down the button on the side or back for 10 to 15 seconds until you see the Fitbit logo appear on the screen, then releasing. The exact button location and hold time depend on your model — a Charge 5 uses the side button, while an Inspire 3 uses the back button. After you release, the device will power off and back on, which usually takes 30 seconds to a minute.

A restart clears temporary glitches that cause the device to freeze, stop syncing with your phone, or display incorrect data. It does not erase your personal data, settings, or workout history — those stay on the device and in your Fitbit account. Think of it as the same thing you do when your phone acts up: turn it off and back on.

Key Takeaways

  • Hold the button on your Fitbit for 10 to 15 seconds until the Fitbit logo appears, then release to restart.
  • A restart fixes freezing, syncing problems, and display errors without erasing your data or account information.
  • The button location varies by model — check your device manual or Fitbit's support site to find yours.
  • If the device still does not work after a restart, try unpairing it from your phone and pairing it again.

Restart steps for common Fitbit models

The restart process is nearly identical across Fitbit devices, but the button you press is not always in the same place. Here is where to find it on the most common models:

Fitbit ModelButton LocationHold Time
Charge 5, Charge 6Side button10 to 15 seconds
Inspire 3, Inspire 2Back of device10 to 15 seconds
Sense, Sense 2Left side button10 to 15 seconds
Versa 3, Versa 4Left side button10 to 15 seconds
Ace 3Back of device10 to 15 seconds

If you are not sure which model you own, open the Fitbit app on your phone, tap your profile picture, and select your device name. The model number appears under "Device Information." You can also look at the back of the device itself — the model name is usually printed there.

What happens during a restart

When you hold the button, the screen will go black. Keep holding even though nothing appears to be happening. After 10 to 15 seconds, the Fitbit logo will flash on the screen. At that point, release the button and let the device finish restarting on its own — this takes another 30 seconds or so.

During the restart, the device powers down completely and then powers back up. Your heart rate sensor, step counter, and all other sensors reset to their baseline state. The device reconnects to your phone's Bluetooth automatically if it was paired before. Once the home screen appears, your Fitbit is ready to use.

When to restart versus when to unpair and re-pair

A restart fixes most temporary problems: the screen freezes, the device stops recording steps, or it will not sync with your phone even though Bluetooth is on. Try a restart first because it takes less than two minutes and solves the issue most of the time.

If restarting does not work, the next step is to unpair the device from your phone and pair it again. This is stronger than a restart because it clears the connection between your device and the Fitbit app. Open the Fitbit app, go to your profile, select your device, and tap "Remove This Device." Then hold the button again to restart, and follow the pairing instructions in the app as if you were setting up a new device. This process takes about five minutes and fixes syncing problems that a straightforward restart cannot.

Restarting a Fitbit that will not turn on

If your Fitbit screen is completely black and will not respond to button presses, charge it for at least 30 minutes before attempting a restart. A device with a dead battery will not show the Fitbit logo even if you hold the button. Plug it into the charging cable that came with it — the metal contacts on the back of the device should align with the contacts on the charger.

After charging for half an hour, try the restart process again. If the screen still does not light up after a full charge and a restart attempt, the device may have a hardware problem. At that point, contact Fitbit support through the app or visit support.fitbit.com to discuss repair or replacement options.

Restarting without losing your data

A restart does not erase anything. Your step count, heart rate history, workout records, and all personal settings stay on the device and in your Fitbit account. The device stores data locally and also syncs it to Fitbit's servers, so even if something went wrong during the restart, your information is backed up.

The only time you lose data is if you factory reset the device, which is a different process and requires intentional action. A straightforward restart — holding the button until the logo appears — is completely safe and will not affect any of your information.

Troubleshooting if the restart does not work

If you held the button for 15 seconds and the Fitbit logo never appeared, the device may not have restarted. Try again, but this time hold the button for a full 20 seconds to be sure. Some devices are slower to respond than others, especially if the battery is low.

If the logo appears but the device still freezes or will not sync after the restart completes, unpair and re-pair as described above. If that does not work either, charge the device fully, restart it one more time, and then contact Fitbit support. Provide them with your device model and a description of what is happening — they can walk you through more advanced troubleshooting or arrange a replacement if the device is still under warranty.

Frequently Asked Questions

Will restarting my Fitbit erase my data?

No. A restart only powers the device off and back on. All your step counts, workout history, heart rate data, and settings remain on the device and in your Fitbit account. You only lose data if you factory reset, which is a separate action.

How long does a Fitbit restart take?

The entire process takes about one to two minutes. Hold the button for 10 to 15 seconds until the logo appears, then release and wait another 30 to 45 seconds for the device to finish powering back on and reconnecting to your phone.

What if my Fitbit is frozen and will not respond to button presses?

Try holding the button for a full 20 seconds even if nothing appears on screen. If the device is truly unresponsive, charge it for 30 minutes first — a very low battery can prevent the restart from working. Then try again.

Do I need to unpair my Fitbit before restarting it?

No. A restart keeps your device paired to your phone and your Fitbit account. You only need to unpair if a restart does not fix the problem and you want to try re-pairing as a stronger troubleshooting step.

Can I restart my Fitbit while it is charging?

Yes, you can restart while it is plugged in. The restart process works the same way whether the device is charging or not.