The quickest way to restart your Fitbit Alta
A restart clears temporary glitches without erasing your data. To restart your Fitbit Alta, press and hold the button on the left side of the device for 8 to 10 seconds until you see the Fitbit logo appear on the screen. Release the button and wait for the device to finish restarting — this usually takes 10 to 15 seconds. Your Alta will then show the time and return to normal operation.
This soft restart works for most problems: the screen freezing, the device not syncing with your phone, or the tracker not responding to button presses. Your steps, heart rate data, and all personal settings stay intact.
Key Takeaways
- Hold the left-side button for 8 to 10 seconds until the Fitbit logo appears, then release and wait for the restart to finish.
- A restart does not erase your data, settings, or synced information — it only clears temporary software problems.
- If the screen is completely unresponsive, charge the device for at least 15 minutes before attempting a restart.
- If a restart does not fix the problem, try unpairing and re-pairing the Alta with your phone through the Fitbit app.
When to restart instead of other fixes
A restart is the first step when your Alta stops responding or behaves oddly. Use it before you try anything else — it solves most temporary problems and takes less than a minute.
You do not need to restart if the problem is a dead battery. If your Alta will not turn on at all, charge it for at least 15 minutes using the included USB charging cable, then try the restart. If the screen still does not light up after charging, the device may have a hardware problem.
What happens during a restart
When you hold the button, the device shuts down and starts up again from scratch. This clears any stuck processes or corrupted temporary files that might be causing the freeze or lag. The restart does not touch your stored data — your step count, heart rate history, weight log, and all other information saved to the device stays where it is.
Your synced data (the information already sent to the Fitbit app on your phone) is safe no matter what. Even if something goes wrong during the restart, your data exists in two places: on the device and in your Fitbit account online.
Restarting when the screen is frozen
If the screen is completely frozen and the button does not respond, hold it anyway. Press and hold the left button for the full 8 to 10 seconds even if nothing appears to happen. The device may not show any response while frozen, but the button press is still being registered internally.
If the screen remains black after you release the button, wait 30 seconds without pressing anything. Sometimes the restart takes longer when the device is severely frozen. If the Fitbit logo still does not appear after a full minute, plug the device in to charge and try again after 15 minutes of charging.
Syncing problems after a restart
After a restart, your Alta should sync automatically with the Fitbit app on your phone within a few minutes. Open the Fitbit app and check that your device is listed and shows a recent sync time. If it does not sync within 5 minutes, try opening and closing the app, or turn your phone's Bluetooth off and back on.
If syncing still fails, the problem may not be a straightforward software glitch. In that case, unpair the device from the Fitbit app (go to your device settings in the app and select "Remove This Device"), then pair it again from scratch. This forces the app and device to re-establish their connection and often solves sync problems that a restart alone cannot fix.
When a restart is not enough
If your Alta still freezes, does not sync, or behaves strangely after a restart, the issue is likely deeper than a temporary glitch. Try charging the device fully, then unpairing and re-pairing it with your phone. If problems continue after that, contact Fitbit support — the device may have a hardware fault or a software issue that requires a factory reset or replacement.
A factory reset erases all data on the device and returns it to the state it was in when new. Do not attempt a factory reset unless Fitbit support tells you to, because you will lose any data that has not synced to your account yet.
Frequently Asked Questions
Will restarting my Fitbit Alta erase my data?
No. A restart only clears temporary software problems. All your step counts, heart rate data, and personal settings remain on the device. Data that has already synced to your Fitbit account is also safe.
How long does a restart take?
The restart itself takes 10 to 15 seconds from the moment you release the button. The Fitbit logo appears first, then the device shows the time and returns to normal operation.
What if the button does not respond at all?
Charge the device for at least 15 minutes. A completely dead battery can make the button unresponsive. After charging, try the restart again. If the button still does not work, the device may have a hardware problem.
Do I need to restart my Fitbit Alta regularly?
No. Restart only when you notice a problem — freezing, not syncing, or unresponsiveness. Normal use does not require regular restarts.
Can I restart my Alta while it is charging?
Yes, you can restart while the device is plugged in. The restart will complete normally and the device will continue charging afterward.