The two ways to restart your Fitbit Charge 2
A restart clears temporary glitches that slow down your tracker or stop it from syncing with your phone. The Fitbit Charge 2 has two restart methods: a soft reset (which you can do right now) and a factory reset (which erases all your data and settings). Most of the time, a soft reset fixes the problem.
A soft reset is like turning a device off and back on. It takes about 10 seconds and keeps all your data intact. A factory reset wipes everything and returns the tracker to the state it was in when you first unboxed it — use this only if the soft reset does not work or if you are selling or giving away the device.
Key Takeaways
- A soft reset takes 10 seconds, requires no tools, and fixes most sync and performance problems without erasing your data.
- To soft reset, hold the back button for 10 to 15 seconds until you see the Fitbit logo on the screen, then release.
- A factory reset erases all your data, stats, and settings and should only be used as a last resort or before giving the device away.
- After a soft reset, your Charge 2 will reconnect to the Fitbit app automatically if Bluetooth is on.
How to soft reset your Charge 2
Locate the button on the back of your Charge 2 — it is the only button on the rear of the band. Press and hold this button for 10 to 15 seconds. You will see the Fitbit logo appear on the screen, and the device will vibrate. Once you see the logo, release the button and wait a few seconds for the tracker to finish restarting.
The entire process takes less than a minute. Your tracker will show the time and date once the restart is complete. All your data — steps, heart rate, sleep records, and personal settings — stays on the device. Open the Fitbit app on your phone to confirm the tracker is syncing again.
When to use a factory reset
A factory reset erases everything on your Charge 2 and returns it to factory settings. Use this only if a soft reset did not fix the problem, or if you are selling, trading in, or giving the device to someone else. After a factory reset, you will need to set up the tracker again from scratch using the Fitbit app.
To factory reset, hold the back button for 10 to 15 seconds until you see the Fitbit logo. Instead of releasing, keep holding for another 10 to 15 seconds until you see a second screen with a trash can icon. Release the button. The device will show a loading screen, then restart with all data removed.
What to do after restarting
After a soft reset, your Charge 2 should reconnect to the Fitbit app automatically within a few minutes, as long as Bluetooth is turned on in your phone's settings. Open the Fitbit app and check the device tile — it should show a green checkmark or "Connected" status.
If the tracker does not reconnect after 5 minutes, try opening the Fitbit app and tapping the device tile, then tapping "Reconnect." If that does not work, unpair the device in your phone's Bluetooth settings and pair it again from scratch using the Fitbit app.
Common reasons your Charge 2 needs a restart
Your tracker may stop syncing with your phone, freeze on a screen, or stop counting steps correctly. These problems often happen after a software update, if the app crashes, or if the Bluetooth connection drops. A soft reset clears the device's temporary memory and fixes most of these issues without losing any data.
If your Charge 2 is not charging, a restart will not fix that — the problem is likely a dirty charging port or a worn battery. If the screen is cracked or the band is damaged, a restart will not repair the hardware either. In those cases, contact Fitbit support or consider replacing the device.
Troubleshooting if the restart does not work
If a soft reset did not fix the problem, try charging your Charge 2 for at least 30 minutes before attempting another restart. A low battery can prevent the restart from completing. Once the battery is above 50 percent, try the soft reset again.
If the tracker still does not work after a second soft reset and a full charge, try a factory reset. This erases all data, so back up any information you want to keep by taking screenshots of your stats in the Fitbit app. After the factory reset, set up the device again and see if the problem is resolved. If it persists, the device may have a hardware fault and you should contact Fitbit support.
Frequently Asked Questions
Will a soft reset delete my steps and heart rate data?
No. A soft reset only clears temporary memory and does not touch your stored data. All your steps, heart rate records, sleep data, and personal settings remain on the device and in the Fitbit app.
How long does a restart take?
A soft reset takes about 10 to 15 seconds to perform. The device will show the Fitbit logo and vibrate when it is done. A factory reset takes slightly longer — usually 30 seconds to a minute — and shows a loading screen before the device restarts.
Do I need to unpair my Charge 2 before restarting it?
No. A soft reset does not require unpairing. The tracker will reconnect to your phone automatically after the restart. You only need to unpair if the tracker is not reconnecting after the restart and you want to pair it fresh.
What if my Charge 2 is stuck on the Fitbit logo screen?
If the logo stays on screen for more than 30 seconds, the restart may not have completed. Try holding the back button again for 10 to 15 seconds. If the screen remains frozen after a second attempt, charge the device fully and try once more. If it is still stuck, a factory reset may be necessary.
Can I restart my Charge 2 while it is charging?
Yes, you can restart the device while it is on the charger. A soft reset will not interrupt the charging process. However, it is easier to see the Fitbit logo if the device is not on the charger, so you may want to remove it first to confirm the restart completed.