A restart clears temporary glitches without erasing your data
A restart of your Fitbit Charge 6 is a soft reset that turns the device off and back on. It fixes freezing, unresponsive screens, syncing problems, and battery drain without deleting your activity history, heart rate data, or personal settings. The restart takes about 30 seconds and requires only your device and a USB charger.
You should restart your Charge 6 before contacting Fitbit support or trying more drastic steps like a factory reset. Most common problems—a sluggish interface, a workout that won't record, or a connection that drops—clear up after a restart.
Key Takeaways
- A restart powers off your Charge 6 and back on without erasing any data, activity history, or settings.
- Plug your device into its USB charger before you start, because the restart process drains the battery slightly.
- Hold the button on the left side of the device for 8 to 10 seconds until you see the Fitbit logo appear on the screen.
- Wait for the device to power back on fully, which takes about 10 to 15 seconds after the logo disappears.
- If the screen remains frozen or unresponsive after a restart, a factory reset or contact with Fitbit support may be necessary.
Plug in your Charge 6 before you restart
Connect your Fitbit Charge 6 to its USB charging cable before you begin. The restart process uses a small amount of battery power, and starting with a full or near-full charge ensures the device completes the restart without shutting down mid-process.
If your battery is critically low (below 10 percent), charge the device for at least 15 minutes before restarting. A device that powers off during a restart can fail to boot back up properly.
Hold the left button until the Fitbit logo appears
Locate the single button on the left side of your Charge 6. Press and hold this button continuously for 8 to 10 seconds. You will see the Fitbit logo appear on the screen, followed by a brief animation. Do not release the button until the logo is fully visible.
The screen may go black during this process. This is normal. Keep holding the button even if the display appears to turn off completely. Releasing too early stops the restart and returns you to the normal screen.
Wait for the device to power back on
After the Fitbit logo disappears, the screen will go black for 10 to 15 seconds. During this time, the device is restarting its internal systems. Do not press any buttons or disconnect the charger.
The home screen will reappear once the restart is complete. You may see a brief loading animation or a clock face before the normal display returns. Your device is ready to use once you see your usual watch face or home screen.
Test your device after the restart
Open an app or check a recent activity to confirm the device is responding normally. Swipe through the menu, check that your heart rate sensor is working, and verify that the screen responds to taps and swipes without lag.
If the problem that prompted the restart has cleared, you are done. If the device still freezes, crashes, or fails to sync with your phone, try restarting your phone as well. If both devices have been restarted and the problem persists, a factory reset or contact with Fitbit support may be necessary.
When a restart is not enough
A restart solves most temporary software problems, but some issues require a factory reset. A factory reset erases all data on your device and returns it to its original state. You should only do this if a restart does not fix the problem, because you will lose all activity history stored on the device itself (though your data synced to the Fitbit app on your phone is preserved).
If your Charge 6 does not respond to the restart process—for example, the screen remains completely black or the button does not work—contact Fitbit support directly. A hardware failure may require replacement or repair.
Frequently Asked Questions
Will a restart erase my activity data or settings?
No. A restart is a soft reset that only clears temporary memory. All your activity history, heart rate data, personal settings, and saved workouts remain on the device. Your data synced to the Fitbit app on your phone is also unaffected.
How often should I restart my Charge 6?
You do not need to restart regularly. Restart only when you notice a problem—freezing, unresponsive screen, syncing issues, or unusual battery drain. Most users restart a few times per year or less.
What is the difference between a restart and a factory reset?
A restart turns the device off and back on without erasing data. A factory reset erases everything on the device and returns it to its original state. Always try a restart first. Use a factory reset only if a restart does not solve the problem.
My screen is completely black and will not respond. Can I still restart?
Try holding the left button for 8 to 10 seconds even if you see no response. The screen may be off but the device may still power on. If nothing happens after 15 seconds, plug the device in and wait 30 minutes, then try again. If the screen remains black, contact Fitbit support.
Do I need to disconnect the charger during the restart?
No. Keep the device plugged in throughout the restart process. Disconnecting the charger mid-restart can interrupt the process and cause the device to fail to power back on properly.