A restart clears temporary glitches without erasing your data

A soft reset on your Fitbit Charge HR stops the device, clears its memory cache, and starts it fresh — all without deleting your activity history, goals, or account settings. This fixes most problems: a frozen screen, buttons that don't respond, or syncing that stalls. The process takes less than a minute and requires only the device itself.

If your Charge HR is completely unresponsive or the soft reset doesn't work, a factory reset erases everything on the device and returns it to its original state. You would then set it up again from scratch using the Fitbit app. A factory reset is a last resort — try the soft reset first.

Key Takeaways

  • A soft reset stops and restarts your Charge HR without erasing any of your data or settings.
  • Hold the button on the back of the device for 10 to 15 seconds until you see the Fitbit logo appear on the screen.
  • After the restart, your device will show the time and reconnect to your phone automatically within a few minutes.
  • If a soft reset does not fix the problem, a factory reset erases everything and requires you to set up the device again.

How to perform a soft reset

Locate the button on the back of your Charge HR — it is a small circular button on the underside of the band, near the clasp. Press and hold this button for 10 to 15 seconds. You do not need to press hard; steady pressure is enough.

While you hold the button, watch the screen. After a few seconds, the Fitbit logo will appear. Keep holding until the logo disappears and the screen goes blank. This usually takes 10 to 15 seconds total. Release the button and wait 5 to 10 seconds. The time and date will reappear on the screen, and your device is now restarted.

Your Charge HR will reconnect to your phone and the Fitbit app automatically. This may take a minute or two. Check that the time is correct and that your steps and heart rate are updating normally in the app.

When to try a factory reset

If the soft reset did not solve the problem — the screen is still frozen, buttons still do not respond, or the device will not sync — a factory reset may help. Be aware that a factory reset erases all data stored on the device itself, including any activity that has not yet synced to the app. Your account data in the Fitbit app remains intact.

To perform a factory reset, hold the back button for 10 to 15 seconds as you would for a soft reset, but continue holding for an additional 10 to 15 seconds after the Fitbit logo disappears. You will see a progress bar or a series of dashes on the screen. Keep holding until the reset is complete — this can take up to 30 seconds total. The device will restart and show the initial setup screen.

Setting up your device after a factory reset

After a factory reset, your Charge HR will display the setup screen, usually showing the Fitbit logo or a prompt to begin pairing. Open the Fitbit app on your phone and follow the pairing instructions. The app will guide you through reconnecting your device, and your account data will sync back to the device.

Your activity history, goals, and personal settings stored in your Fitbit account will return to the device. The only data lost is anything recorded on the device that had not synced before the reset — typically just a few hours of recent activity if the device was not syncing properly.

Troubleshooting if the restart does not work

If your Charge HR still does not respond after a soft reset and a factory reset, the problem may be hardware-related rather than a software glitch. Check that the device is charged — connect it to the USB charging cable for at least 2 hours. A completely drained battery can prevent the device from responding to button presses.

If the device still will not restart after charging, or if the screen remains blank, contact Fitbit support. Your device may be under warranty depending on when you purchased it. Fitbit's support team can determine whether the device needs repair or replacement.

How to avoid needing a restart

Keep your Charge HR charged above 20 percent battery. A device running on very low battery can become unresponsive. Sync your device to the Fitbit app at least once a week — this keeps your data backed up and often prevents sync-related freezes.

Update the Fitbit app on your phone whenever a new version is available. Updates often include fixes for syncing problems and device compatibility. If you notice your Charge HR is sluggish or slow to respond, a soft reset before it becomes completely frozen can prevent frustration.

Frequently Asked Questions

Will a soft reset erase my activity history?

No. A soft reset only restarts the device's software. All your activity, heart rate data, and account settings remain on the device and in the Fitbit app. Your data is safe.

How long does a restart take?

The restart itself takes 10 to 15 seconds. After you release the button, wait another 5 to 10 seconds for the screen to show the time again. Reconnecting to your phone may take a minute or two more.

What is the difference between a soft reset and a factory reset?

A soft reset restarts the device and clears temporary problems without erasing any data. A factory reset erases everything on the device and returns it to its original state. Use a soft reset first; only try a factory reset if the soft reset does not work.

Can I restart my Charge HR while it is charging?

Yes, you can perform a soft reset while the device is on the charger. The restart will not interrupt the charging process. However, make sure the device is not actively syncing to your phone when you restart it.

What should I do if my Charge HR will not turn back on after a restart?

Charge the device for at least 2 hours using the USB charging cable. If it still will not respond, try the factory reset again, holding the button for the full 30 seconds. If the screen remains blank after that, the device may have a hardware problem and you should contact Fitbit support.