The Two Ways to Restart Your Fitbit Watch

A restart clears temporary glitches without erasing your data or settings. Your Fitbit watch has two restart options: a soft restart (which takes 10 seconds) and a factory reset (which wipes everything). Most of the time, a soft restart fixes freezing, unresponsive screens, or syncing problems. You should only do a factory reset if the soft restart does not work or if you are selling the device.

The steps differ slightly depending on your Fitbit model, but the principle is the same: you hold a button or combination of buttons until the screen goes black and the Fitbit logo appears. This article covers the most common models—Versa, Sense, Inspire, and Charge—and tells you exactly which button to press and for how long.

Key Takeaways

  • A soft restart takes 10 to 15 seconds and fixes most problems without losing your data, activity history, or personal settings.
  • Hold the back button (or back and bottom buttons together on some models) until you see the Fitbit logo, then release.
  • If the soft restart does not work, try charging your watch for at least 15 minutes before restarting again.
  • A factory reset erases all your data and returns the watch to factory settings, so only use it as a last resort or before giving the device away.
  • After a restart, your watch will sync with the Fitbit app automatically once it reconnects to your phone.

Soft Restart for Fitbit Versa and Versa 2

On the Versa and Versa 2, the soft restart button is on the left side of the watch. Locate the back button (the small button on the left edge) and press and hold it for 10 to 15 seconds. You will see the screen go black, and then the Fitbit logo will appear in the center. Release the button once you see the logo.

The watch will take another 10 to 20 seconds to fully restart and return to the clock face. Do not press any buttons during this time. Once the clock reappears, your watch is ready to use, and all your data remains intact.

Soft Restart for Fitbit Sense

The Sense restart process is nearly identical to the Versa. Press and hold the back button on the left side of the watch for 10 to 15 seconds until the screen goes black and the Fitbit logo appears. Release the button and wait for the watch to finish restarting.

If your Sense is frozen or the screen is unresponsive, make sure the watch has at least 20 percent battery before you restart. A low battery can sometimes prevent a clean restart. Charge the watch for 15 minutes and try again if the first attempt does not work.

Soft Restart for Fitbit Inspire and Inspire 2

The Inspire models use a different button combination. Hold down the back button and the bottom button at the same time for 10 to 15 seconds. The screen will go black, the Fitbit logo will appear, and then release both buttons. The watch will restart and return to the clock face within 20 seconds.

The Inspire has a smaller screen than the Versa or Sense, so the buttons are closer together. Make sure you are pressing both buttons firmly and evenly to avoid accidentally pressing just one button, which will not trigger the restart.

Soft Restart for Fitbit Charge 4 and Charge 5

On the Charge models, the restart button is the single button on the left side of the watch. Press and hold this button for 10 to 15 seconds until you see the Fitbit logo appear on the screen. Release the button and wait for the watch to finish restarting.

The Charge watches restart slightly faster than the Versa or Sense—usually within 10 to 15 seconds total. Once the clock face reappears, your watch is ready. All activity data, heart rate history, and personal settings will remain unchanged.

Factory Reset: When and How to Do It

A factory reset erases all data stored on the watch itself—your activity history, personal settings, and any saved information—and returns the device to its original state. You should only do this if a soft restart does not fix the problem, or if you are giving the watch to someone else and want to remove your information.

To perform a factory reset, open the Settings app on your watch, scroll to About, and select Factory Reset. Confirm the action when prompted. The watch will restart and display the initial setup screen, just as it did when it was new. This process takes 30 to 60 seconds. After a factory reset, you will need to set up the watch again in the Fitbit app and reconnect it to your phone.

Before you factory reset, make sure your watch is charged to at least 50 percent. A factory reset on a low battery can fail and leave the watch in an unusable state. If you cannot access the Settings menu because the watch is frozen, perform a soft restart first and try the factory reset again.

What to Do If Your Watch Still Does Not Restart

If the soft restart does not work, charge your watch for at least 30 minutes before trying again. A completely drained battery can prevent the restart process from completing. Use the official Fitbit charger or a compatible USB charger and make sure the charging contacts on the back of the watch are clean and dry.

If the watch still will not restart after charging, try a factory reset using the Settings menu. If the screen is completely unresponsive and you cannot access Settings, plug the watch into the charger and leave it connected for one full hour. Sometimes a deeply discharged watch needs extended charging before it will respond to any input.

If none of these steps work, the watch may have a hardware problem. Contact Fitbit support through the Fitbit app or visit the Fitbit website for troubleshooting options specific to your model. Fitbit offers a one-year warranty on most watches, so if your device is still under warranty, you may be able to get a replacement.

Frequently Asked Questions

Will restarting my Fitbit erase my activity history?

No. A soft restart keeps all your data, including steps, heart rate, sleep records, and personal settings. Only a factory reset erases data, and that is a separate process you have to manually choose in the Settings menu.

How often should I restart my Fitbit?

You only need to restart your Fitbit when it is frozen, not syncing, or behaving strangely. Most people never need to restart their watch. If you find yourself restarting weekly, there may be a deeper problem—try a factory reset or contact Fitbit support.

Can I restart my Fitbit while it is charging?

Yes, you can restart your watch while it is on the charger. In fact, if your watch is low on battery and unresponsive, charging it first and then restarting is often the best approach. Just make sure the watch has at least 20 percent battery before you attempt the restart.

What is the difference between a soft restart and a factory reset?

A soft restart is a quick reboot that clears temporary problems and keeps all your data. A factory reset erases everything and returns the watch to its original state. Always try a soft restart first—only do a factory reset if the soft restart does not work or if you are preparing the watch for someone else to use.

How long does a restart take?

A soft restart takes 20 to 30 seconds total, including the time you hold the button and the time the watch takes to boot back up. A factory reset takes 30 to 60 seconds. During either process, do not press any buttons or try to interact with the watch.