Restart Your Fitbit Charge 6 in Two Steps

A restart clears temporary glitches that slow down your tracker or cause the screen to freeze. The Fitbit Charge 6 restarts by holding the button on the left side of the device for 10 to 12 seconds until you see the Fitbit logo appear on the screen. Release the button once the logo shows, and your tracker will power back on within 30 seconds.

This is different from a factory reset, which erases all your data and settings. A restart keeps your personal information, workout history, and synced data intact—it straightforward reboots the device the way restarting a phone does.

Key Takeaways

  • Press and hold the left-side button for 10 to 12 seconds until the Fitbit logo appears on screen.
  • A restart fixes freezing, unresponsive screens, and syncing problems without erasing your data.
  • Your tracker will turn back on within 30 seconds after you release the button.
  • If the restart does not fix the problem, charge your device fully and try again before considering a factory reset.

When Your Charge 6 Needs a Restart

A restart solves most common problems with the Charge 6. If your screen is frozen and taps do not work, if the device will not sync with your phone, or if the tracker feels sluggish and slow, a restart is the first thing to try.

You may also notice the display is dim, buttons are not responding, or the tracker keeps disconnecting from Bluetooth. These are all signs that a restart will likely fix the issue. Restarting takes less than a minute and carries no risk to your data.

Step-by-Step Restart Instructions

Step 1: Locate the button. On the Fitbit Charge 6, the single button sits on the left side of the device. It is the only physical button on the tracker.

Step 2: Press and hold. Press the left button and hold it down. Do not release. Keep holding for a full 10 to 12 seconds. Counting slowly in your head ("one Mississippi, two Mississippi...") helps you reach the right duration.

Step 3: Watch for the logo. While you are holding the button, the screen will go black. Keep holding. After about 8 to 10 seconds, the Fitbit logo will appear in the center of the screen. This is your signal to release the button.

Step 4: Wait for the restart. Once you release, the device will power back on. You may see the Fitbit logo for a few more seconds, then your normal watch face will return. The entire process takes about 30 seconds from start to finish.

What to Do If the Restart Does Not Work

If your Charge 6 still freezes or does not respond after a restart, charge the device fully before trying again. A low battery can prevent a proper restart. Plug your tracker into the charging cable and leave it for at least two hours, then attempt the restart a second time.

If the device still does not respond after a full charge and a second restart attempt, the next step is a factory reset. A factory reset erases all your data, so only do this if a restart has not solved the problem. You can perform a factory reset through the Fitbit app on your phone by going to your device settings and selecting "Clear Device."

Common Mistakes to Avoid

The most common mistake is not holding the button long enough. Many people release after 5 or 6 seconds, before the Fitbit logo appears. The logo is your confirmation that you held it the right amount of time. If you do not see the logo, you released too early—try again and count to 10 or 11 before letting go.

Another mistake is restarting a device that is nearly out of battery. If your Charge 6 has less than 20 percent battery, charge it first. A low battery can cause the restart to fail or take much longer than normal.

Do not confuse a restart with a factory reset. A restart is safe and keeps your data. A factory reset erases everything. If you only want to fix a frozen screen or syncing problem, a restart is all you need.

After Your Tracker Restarts

Once your Charge 6 powers back on, it should work normally. Your watch face, stats, and all your saved data will be exactly as you left them. The restart does not change any settings or delete any information.

If you were having syncing problems, open the Fitbit app on your phone after the restart and check that your tracker connects. Most syncing issues clear up once the device has restarted. If the problem persists, try restarting your phone as well, then open the Fitbit app again.

Frequently Asked Questions

Will restarting my Charge 6 erase my workout history?

No. A restart keeps all your data, including workouts, steps, heart rate history, and personal settings. Only a factory reset erases data, and that is a separate process you have to do intentionally through the app.

How long does a restart take?

The entire restart takes about 30 seconds from the moment you press the button until your watch face returns. You hold the button for 10 to 12 seconds, then wait another 15 to 20 seconds for the device to power back on.

Can I restart my Charge 6 while it is charging?

Yes, you can restart while the device is on the charger. It does not matter whether the tracker is plugged in or not. However, if your battery is very low, charge it to at least 20 percent before attempting a restart.

What if the screen stays black after I release the button?

If the screen does not turn back on within 30 seconds, the battery may be completely drained. Place your Charge 6 on the charger and leave it for at least 30 minutes, then try the restart again. If the screen still does not respond, contact Fitbit support.

Do I need to restart my Charge 6 regularly?

No. You only need to restart when you notice a problem like freezing, unresponsiveness, or syncing issues. Regular restarts are not necessary for normal operation.