The Two Ways to Restart Your Fitbit Sense 2

A restart clears temporary glitches without erasing your data or settings. Your Fitbit Sense 2 has two restart options: a soft restart (which takes 10 seconds) and a factory reset (which wipes everything). Most of the time, a soft restart solves problems like a frozen screen, missed notifications, or sync failures. You only need a factory reset if the soft restart doesn't work or if you're selling the device.

A soft restart is safe to try first. It's like turning a computer off and back on—your watch keeps all your activity history, personal settings, and paired phone connection. A factory reset erases everything and returns the watch to its original state, so only do that if nothing else works.

Key Takeaways

  • A soft restart takes 10 seconds and fixes most problems without losing any of your data or settings.
  • Hold the back button (the small button on the left side of the watch) for 10 to 15 seconds until you see the Fitbit logo appear on the screen.
  • After the restart completes, your watch will show the time and date again, which usually takes less than a minute.
  • If a soft restart doesn't fix the problem, you can perform a factory reset through the Fitbit app on your phone, but this erases all your data.

How to Do a Soft Restart

A soft restart is the quickest fix for most problems. Locate the back button on the left side of your Fitbit Sense 2—it's the small, flat button below the screen. Press and hold this button for 10 to 15 seconds. Don't let go when you see the Fitbit logo appear; keep holding until the logo disappears and the watch screen goes black.

The watch will restart and show the Fitbit logo again, then display the time and date. This entire process takes less than a minute. Once you see the time on your screen, the restart is complete. Your watch will reconnect to your phone automatically if Bluetooth is turned on.

If the screen doesn't respond or the button feels stuck, try again. Sometimes a second attempt works if the watch was very frozen. If the watch still won't restart after three attempts, move on to a factory reset.

When to Try a Factory Reset

A factory reset erases all your data, settings, and personal information from the watch itself. Your activity history stays safe in the Fitbit app on your phone, but your watch will no longer remember your personal settings like clock face, notifications, or which apps you had installed. Only do a factory reset if a soft restart didn't solve the problem.

Before you factory reset, make sure your watch is charged to at least 50 percent. The reset process can take several minutes, and a low battery might interrupt it. Also, write down any custom settings you want to remember, since you'll need to set them up again after the reset.

How to Factory Reset Through the Fitbit App

Open the Fitbit app on your phone and tap the profile icon in the bottom right corner. Scroll down and select your Fitbit Sense 2 from the list of devices. Tap the gear icon (settings) next to the device name. Scroll down to find "Clear User Data" or "Factory Reset"—the exact wording varies by phone type and app version.

Tap that option and confirm when the app asks if you're sure. The app will send a command to your watch. Your Fitbit Sense 2 will vibrate and show a progress bar on the screen. The reset takes 2 to 5 minutes. When it's done, the watch will restart and show the setup screen, just like when it was brand new.

After the factory reset, you'll need to set up your watch again. Open the Fitbit app, tap the plus icon to add a device, and follow the pairing steps. Your phone will reconnect to the watch, and your activity history will reappear in the app.

What to Do If Your Watch Won't Restart

If the soft restart doesn't work and the factory reset won't start, the watch may have a hardware problem. Try charging it for at least 30 minutes first—a very low battery can prevent restarts. Use the official Fitbit charger that came with your watch, not a generic USB cable.

If charging doesn't help, try the soft restart again while the watch is plugged in. Sometimes a restart works better when power is connected. If the watch still won't respond after charging and a second soft restart attempt, contact Fitbit support through the app or visit their website. Your watch may be under warranty, especially if it's less than a year old.

Common Mistakes to Avoid

Don't hold the back button for too long—more than 20 seconds won't help and might trigger a factory reset instead. If you only want to soft restart, release the button as soon as the screen goes black after the Fitbit logo disappears. Holding it longer than necessary wastes time and risks starting an unwanted factory reset.

Don't assume a restart failed just because the watch takes a few seconds to turn back on. After you release the button, wait 10 to 15 seconds for the Fitbit logo to appear. If nothing happens after 30 seconds, try the restart again.

Don't factory reset if you're not sure you need to. Once you start a factory reset, you can't stop it partway through. If you're not certain a soft restart didn't work, try it two or three more times before moving to a factory reset.

Frequently Asked Questions

Will restarting my Fitbit Sense 2 erase my activity history?

A soft restart will not erase anything. A factory reset erases data stored on the watch itself, but your activity history stays in the Fitbit app on your phone, so you won't lose your steps, heart rate, or sleep data.

How long does a soft restart take?

The entire soft restart takes less than a minute from the moment you press the back button until the watch shows the time again. Most of that time is the watch powering down and back up.

Can I restart my Fitbit Sense 2 without using the app?

Yes. A soft restart uses only the physical back button on the watch and requires no phone or app. A factory reset can be done through the app, but you can also restart the watch by holding the back button for 20 to 30 seconds if the app method doesn't work.

What should I do if my watch is frozen and won't respond to button presses?

Try holding the back button for the full 15 seconds even if the screen doesn't seem to respond. Sometimes a frozen watch won't show any visual feedback while you're holding the button, but the restart still happens. If nothing changes after 30 seconds, charge the watch for 15 minutes and try again.

Do I need to unpair my watch before restarting it?

No. A soft restart keeps your watch paired to your phone. A factory reset will unpair it, but the app will guide you through pairing again after the reset is complete.